Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

3201 - 3300 out of 6,565Page size: 100
RSS feed of this list
  1. 2015
  2. Published

    Impact of processing conditions on inter-tablet coating thickness variations measured by terahertz in-line sensing

    Lin, H., May, R. K., Evans, M. J., Zhong, S., Gladden, L. F., Shen, Y. & Zeitler, J. A., 2015, In: Journal of Pharmaceutical Sciences. 104, 8, p. 2513-2522 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    In Situ Transesterification of Spent Coffee Grounds for Biodiesel Production

    Najdanovic, V., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  4. Published

    Investigation of pharmaceutical film coating process with terahertz sensing, optical coherence tomography and numerical modelling

    Lin, H., Dong, Y., Pei, C., Elliot, J. A., Shen, Y. & Zeitler, J. A., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  5. Published

    Low-voltage ZnO thin-film transistors employing Nd2O3 high-k dielectrics deposited by spray pyrolysis in air

    Bin Esro, M., Kolosov, O., Vourlias, G., Krier, A., Milne, W. I. & Adamopoulos, G., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  6. Published

    Modeling and characterization of intra-vial heterogeneity of lyophilized products using X-ray computed tomography

    Capozzi, L., Barresi, A. A., Novajra, G., Oddone, I. & Vitale-Brovarone, C., 2015

    Research output: Book/Report/Proceedings › Proceedings

  7. Published

    Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading

    Borodachenkova, M., Wen, W., Barlat, F., Pereira, A. & Grácio, J., 2015, In: Journal of Materials Processing Technology. 224, p. 143-148 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Modelling and Design of Magnesium and High Entropy Alloys Through Combining Statistical and Physical Models

    Toda-Caraballo, I. & Rivera-Díaz-del-Castillo, P. E. J., 2015, In: JOM. 67, 1, p. 108-117 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Modelling dislocation assisted tempering during rolling contact fatigue in bearing steels

    Kang, J. H., Hosseinkhani, B., Vegter, R. H. & Rivera-Díaz-Del-Castillo, P. E. J., 2015, In: International Journal of Fatigue. 75, p. 115-125 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Modelling of micro-segregation in a 1C-1.5Cr type bearing steel

    Walker, P. F. F., Kerrigan, A., Green, M., Cardinal, N., Connell, J. & Rivera-Díaz-Del-Castillo, P. E. J., 2015, Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, Vol. STP 1580. p. 54-80 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Non-stochastic lattice structures for novel filter applications fabricated via additive manufacturing

    Hasib, H., Rennie, A., Burns, N. & Geekie, L., 2015, In: Filtration. 15, 3, p. 174-180 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Novel designs for undulator based positron sources

    Jenkins, M., 2015, Lancaster University. 200 p.

    Research output: Thesis › Doctoral Thesis

  13. Published

    Numerical hydrodynamic modelling of a pitching wave energy converter

    Bhinder, M. A., Rahmati, M. T., Mingham, C. G. & Aggidis, G. A., 2015, In: European Journal of Computational Mechanics. 24, 4, p. 129-143 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Optimisation and efficiency improvement of pelton hydro turbine using computational fluid dynamics and experimental testing

    Zidonis, A., 2015, Lancaster University. 197 p.

    Research output: Thesis › Doctoral Thesis

  15. Published

    Optimization studies on CSRR loaded waveguide for particle accelerator applications

    Sharples, E. & Letizia, R., 2015, Abstracts 2015 IEEE International Conference on Plasma Sciences (ICOPS). IEEE, 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  16. Published

    Parametric and comparative assessment of Navier-Stokes CFD methodologies for Darrieus wind turbine performance analysis

    Balduzzi, F., Bianchini, A., Gigante, F., Ferrara, G., Campobasso, S. & Ferrari, L., 2015, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. The American Society of Mechanical Engineers, Vol. 9. 12 p. GT2015-42663

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    Parametric optimisation of two Pelton turbine runner designs using CFD

    Zidonis, A., Panagiotopoulos, A., Aggidis, G., Anagnostopoulos, J. & Papantonis, D., 2015, In: Journal of Hydrodynamics. 27, 3, p. 840-847 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Performance evaluation of Wireless Mesh Network routing protocol for smart grid networks

    Tsado, Y., Gamage, K. & Lund, D., 2015, Proceedings of IEICE Information and Communication Technology Forum 2015, Manchester, UK. Piechowiak, M. & Adebisi, B. (eds.). Polish Association of Telecommunication Engineers, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  19. Published

    Preparation and investigation of nano-carbonated hydroxy apatite/polymer composite spongy scaffolds for biomedical applications

    Siddiqi, S. A., Manzoor, F., Azhar, U., Jamal, A., Tariq, M., Anwar, M. S., Saleem, M., Chaudhry, A. A., Rehman, I. U., M., L. (Editor) & B., R. (Editor), 2015, TechConnect World Innovation Conference & Expo 2015. TechConnect, p. 270-273 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  20. Published

    ProTec - A Normal-Conducting Cyclinac for Proton Therapy Research and Radioisotope Production

    Apsimon, R. J., Burt, G. C., Mitchell, J., Pitman, S., Owen, H. & Degiovanni, A., 2015, Proceedings of the 6th International Particle Accelerator Conference. JACoW, p. 3883-3885 3 p. THPF084

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    Quantifying pharmaceutical film coating with optical coherence tomography and terahertz pulsed imaging: an evaluation

    Lin, H., Dong, Y., Shen, Y. & Zeitler, J. A., 2015, In: Journal of Pharmaceutical Sciences. 104, 10, p. 3377-3385 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Radiotherapy Linac Design

    Mitchell, J., 2015, Lancaster University. 159 p.

    Research output: Thesis › Master's Thesis

  23. Published

    Raman spectroscopy of biological tissues

    Talari, A. C. S., Movasaghi, Z., Rehman, S. & Rehman, I. U., 2015, In: APPLIED SPECTROSCOPY REVIEWS. 50, 1, p. 46-111 66 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Real time nanogravimetric monitoring of corrosion for nuclear decommissioning

    Tzagkaroulakis, I. & Boxall, C., 2015, In: ECS Transactions. 66, 17, p. 73-83 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Research and teaching using a hydraulically-actuated nuclear decommissioning robot

    West, C., Burrell, T., Montazeri, A., Monk, S. D. & Taylor, C. J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  26. Published

    Resilient communication for smart grid ubiquitous sensor network: state of the art and prospects for next generation

    Tsado, Y., Lund, D. & Gamage, K., 2015, In: Computer Communications. 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Reverse engineering of obsolete components for realisation using additive manufacturing

    McAlister, C., 2015, Lancaster University. 167 p.

    Research output: Thesis › Master's Thesis

  28. Published

    Review of autonomous navigation for indoor aerial robots within a nuclear decommissioning context

    Burrell, T., Montazeri, A., Monk, S. D. & Taylor, C. J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  29. Published

    Robust aerodynamic design optimization of horizontal axis wind turbines

    Caboni, M., Minisci, E. & Campobasso, S., 2015, Advances in evolutionary and deterministic methods for design, optimization and control in engineering and sciences. Greiner, D., Galván, B., Periaux, J., Gauger, N., Giannakoglou, K. & Winter, G. (eds.). Springer, p. 225-240 16 p. (Computational Methods in Applied Sciences; vol. 36).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    Scenarios and use cases in Tweether: W-band for Internet Everywhere

    Paoloni, C., Letizia, R., Ni, Q., Krozer, V., Andre, F., Magne, F., Marilier, M., Zimmerman, R., Ramirez, A., Vilar, R. & Burciu, I., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  31. Published

    Sensitivity Advantage of QCL Tunable-Laser Mid-Infrared Spectroscopy over FTIR Spectroscopy

    Childs, D. T. D., Hogg, R. A., Revin, D. G., Rehman, I. U., Cockburn, J. W. & Matcher, S. J., 2015, In: APPLIED SPECTROSCOPY REVIEWS. 50, 10, p. 822-839 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artifacts

    Kaufman, J., Rennie, A. E. W. & Clement, M., 2015, In: Procedia CIRP. 36, p. 223-229 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Solid solution formation rules and crystal structure indicators on high entropy alloys

    Toda-Caraballo, I. & Rivera-Diaz-Del-Castillo, P. E. J., 2015, PTM 2015 - Proceedings of the International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015. International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2015, p. 793-794 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  34. Published

    Solution processed a-LaAlO3 gate dielectrics for their applications in thin film transistors employing metal oxide semiconducting channels

    Bin Esro, M., Mazzocco, R., Vourlias, G., Krier, A., Milne, W. I., Kolosov, O. & Adamopoulos, G., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review

  35. Published

    Structural performance assessment of a woven-fabric reinforced composite as applied in construction of inflatable offshore fender barrier structures

    Aboshio, A., Green, S. & Ye, J., 2015, In: International Journal of Structural Stability and Dynamics. 15, 1, 22 p., 1450036.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Structural, surface, in vitro bacterial adhesion and biofilm formation analysis of three dental restorative composites

    Azam, M. T., Khan, A. S., Muzzafar, D., Faryal, R., Siddiqi, S. A., Ahmad, R., Chauhdry, A. A. & Rehman, I. U., 2015, In: Materials. 8, 6, p. 3221-3237 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Sub-THz traveling wave amplifiers based on the double corrugated waveguide

    Paoloni, C. & Mineo, M., 2015, Plasma Sciences (ICOPS), 2015 IEEE International Conference on. IEEE, 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  38. Published

    Successful surgical treatment of obstructive liver disease caused by a biliary calculus in a captive Chimpanzee (Pan Troglodytes)

    Chatterton, J., Unwin, S., Rehman, I. U. & Bridson-Walton, J. M., 2015, In: Journal of Zoo and Wildlife Medicine. 46, 4, p. 925-928 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Support effects in the gas phase hydrogenation of butyronitrile over palladium

    Hao, Y., Wang, X., Perret, N., Cárdenas-Lizana, F. & Keane, M. A., 2015, In: Catalysis, Structure and Reactivity. 1, 1, p. 4-10 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Team-based learning for first year engineering students

    Najdanovic, V., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  41. Published

    Terahertz quantum cascade amplifier

    Ren, Y., Wallis, R., Shah, Y. D., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Kamboj, V., Beere, H. E. & Ritchie, D. A., 2015, 26th International Symposium on Space Terahertz Technology, ISSTT 2015. International Symposium on Space Terahertz Technology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  42. Published

    The mid-infrared swept laser: Life beyond OCT?

    Childs, D. T. D., Hogg, R. A., Revin, D. G., Rehman, I. U., Cockburn, J. W., Matcher, S. J., V.V., T. (Editor), J.G., F. (Editor) & J.A., I. (Editor), 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  43. Published

    THz BWO based on photonic crystal corrugated waveguide

    Letizia, R., Mineo, M. & Paoloni, C., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  44. Published

    THz Wakefield radiation generation via dielectric Bragg waveguide

    Sharples, E. & Letizia, R., 2015, Advanced Electromagnetic Materials in Microwaves and Optics (METAMATERIALS), 2015 9th International Congress on. IEEE, p. 289-291 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  45. Published

    Time-domain and harmonic balance turbulent Navier-Stokes analysis of wind turbine aerodynamics using a fully coupled low-speed preconditioned multigrid solver

    Yan, M., 2015, 223 p.

    Research output: Thesis › Doctoral Thesis

  46. Published

    Understanding microstructural transitions occurring under rolling contact fatigue

    Rivera-Díaz-Del-Castillo, P. E. J., 2015, Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, Vol. STP 1580. p. 550-563 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    Wind turbine design optimization under environmental uncertainty

    Caboni, M., Campobasso, S. & Minisci, E., 2015, ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. The American Society of Mechanical Engineers, Vol. 9. 13 p. GT2015-42674

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. Published

    A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills

    Butler-Smith, P. W., Axinte, D. A., Daine, M., Kennedy, A. R., Harper, L. T., Bucourt, J. F. & Ragueneau, R., 01/2015, In: International Journal of Machine Tools and Manufacture. 88, p. 175-183 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Discrete element modelling of flexible fibre packing

    Langston, P., Kennedy, A. R. & Constantin, H., 01/2015, In: Computational Materials Science. 96, A, p. 108-116 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Enhanced properties of graphene/fly ash geopolymeric composite cement

    Saafi, M., Tang, L., Fung, J., Rahman, M. & Liggat, J., 01/2015, In: Cement and Concrete Research. 67, p. 292-299 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Flexural behavior of pultruded glass fibre reinforced polymer composite beams with bolted splice joints

    Turvey, G. & Cerutti, X., 01/2015, In: Composite Structures. 119, 1, p. 543-550 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Photonic crystal-structures for THz vacuum electron devices

    Letizia, R., Mineo, M. & Paoloni, C., 01/2015, In: IEEE Transactions on Electron Devices. 62, 1, p. 178-183 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Power output and efficiency of beta-emitting microspheres

    Cheneler, D. & Ward, M. C. L., 01/2015, In: Radiation Physics and Chemistry. 106, p. 204-212 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  54. Published

    Styrene carbonate synthesis from carbon dioxide

    Najdanovic-Visak, V., 01/2015.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  55. Published

    High-mobility ZnO thin film transistors based on solution-processed hafnium oxide gate dielectrics

    Bin Esro, M., Vourlias, G., Somerton, C., Milne, W. I. & Adamopoulos, G., 7/01/2015, In: Advanced Functional Materials. 25, 1, p. 134-141 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    Preparation and characterization of carbon black diamond composite electrodes for anodic degradation of phenol

    Ajeel, M. A., Aroua, M. K. & Daud, W. M. A. W., 20/01/2015, In: Electrochimica Acta. 153, p. 379-384 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  57. Published

    Performance of an improved combination unit of Pd-membrane methane steam reformer and intermediate temperature solid oxide fuel cell (C-Pd-ITSOFC)

    Vivanpatarakij, S., Aiouache, F. & Assabumrungrat, S., 30/01/2015, In: International Journal of Hydrogen Energy. 40, 4, p. 1894-1901 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  58. Published

    Advances in the modelling of laser direct metal deposition (invited)

    Pinkerton, A., 02/2015, In: Journal of Laser Applications. 27, S1, 7 p., S15001.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  59. Published

    Designing advanced filtration media through metal additive manufacturing

    Burns, N., Burns, M., Travis, D., Geekie, L. & Rennie, A., 02/2015. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  60. Published

    Experimental investigation of the mechanical properties of neoprene coated nylon woven reinforced composites

    Aboshio, A., Green, S. & Ye, J., 02/2015, In: Composite Structures. 120, p. 386-393 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  61. Published

    Model-based and fuzzy logic approaches to condition monitoring of operational wind turbines

    Cross, P. & Ma, X., 02/2015, In: International Journal of Automation and Computing. 12, 1, p. 25-34 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. Published

    Study of an eighth-harmonic large-orbit gyrotron in the terahertz band

    Li, X., Lang, J., Alfadhl, Y. & Chen, X., 02/2015, In: IEEE Transactions on Plasma Science. 43, 2, p. 506-514 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    A study of the effect of precursors on physical and biological properties of mesoporous bioactive glass

    Shah, A. T., Ain, Q., Chaudhry, A. A., Khan, A. F., Iqbal, B., Ahmad, S., Siddiqi, S. A. & Rehman, I., 1/02/2015, In: Journal of Materials Science. 50, 4, p. 1794-1804 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    An update on glass fiber dental restorative composites: A systematic review

    Khan, A. S., Azam, M. T., Khan, M., Mian, S. A. & Rehman, I. U., 1/02/2015, In: Materials Science and Engineering: A. 47, p. 26-39 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  65. Published

    Porous poly-ether ether ketone (PEEK) manufactured by a novel powder route using near-spherical salt bead porogens: characterisation and mechanical properties

    Siddiq, A. R. & Kennedy, A. R., 1/02/2015, In: Materials Science and Engineering: C . 47, p. 180-188 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Method of metal deposition

    Bromley, M. A. (Inventor) & Boxall, C. (Inventor), 3/02/2015, IPC No. US Patent, Patent No. US 8,946,088 B2

    Research output: Patent

  67. Published

    THz quantum cascade lasers based on a hyperuniform design

    Degl'Innocenti, R., Shah, Y. D., Masini, L., Ronzani, A., Pitanti, A., Ren, Y., Jessop, D. S., Tredicucci, A., Beere, H. E. & Ritchie, D. A., 8/02/2015, In: Proceedings of SPIE. 9370, 6 p., 93700A.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  68. Published

    Modelling solid solution hardening in high entropy alloys

    Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 15/02/2015, In: Acta Materialia. 85, p. 14-23 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

    Celik, K., Karayel, D., Lupeanu, M., Rennie, A. E. W. & Akinci, I., 20/02/2015, In: Bulgarian Journal of Agricultural Science. 21, 3, p. 703-710 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  70. Published

    A hybrid plasmonic waveguide terahertz quantum cascade laser

    Degl'Innocenti, R., Shah, Y. D., Wallis, R., Klimont, A., Ren, Y., Jessop, D. S., Beere, H. E. & Ritchie, D. A., 23/02/2015, In: Applied Physics Letters. 106, 8, 5 p., 082101.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  71. Published

    Pulsed laser deposition of magnesium-doped calcium phosphate coatings on porous polycaprolactone scaffolds produced by rapid prototyping

    Vandrovcova, M., Douglas, T. E. L., Mróz, W., Musial, O., Schaubroeck, D., Budner, B., Syroka, R., Dubruel, P. & Bacakova, L., 23/02/2015, In: Materials Letters. 148, p. 178-183 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Hybrid optical-fibre/geopolymer sensors for structural health monitoring of concrete structures

    Perry, M., Saafi, M., Fusiek, G. & Niewczas, P., 24/02/2015, In: Smart Materials and Structures. 24, 4, 8 p., 045011.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  73. Published

    Accommodation of tin in tetragonal ZrO2

    Bell, B. D. C., Murphy, S. T., Burr, P. A., Grimes, R. W. & Wenman, M. R., 28/02/2015, In: Journal of Applied Physics. 117, 8, 7 p., 084901.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    Greener and efficient epoxidation of 4-vinyl-1-cyclohexene with polystyrene 2-(aminomethyl)pyridine supported Mo(VI) catalyst in batch and continuous reactors

    Mohammed, M. L., Mbeleck, R., Patel, D., Niyogi, D., Sherrington, D. C. & Saha, B., 28/02/2015, In: Chemical Engineering Research and Design. 94, p. 194-203 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  75. Published

    Comparative evaluation of optimum additive manufacturing technology to fabricate medical bespoke prototypes obtained with composite materials

    Ulmeanu, M., Doicin, C., Baila, D., Rennie, A. E. W., Neagu, C. & Laha, S., 03/2015, In: Revista de Materiale Plastice. 52, 3, p. 416-422 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    Powder removal from Ti-6Al-4V cellular structures fabricated via electron beam melting

    Hasib, H., Harrysson, O. L. A. & West, H. A., 03/2015, In: JOM Journal of the Minerals, Metals and Materials Society. 67, 3, p. 639-646 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  77. Published

    Single camera photogrammetry for reverse engineering and fabrication of ancient and modern artefacts

    Kaufman, J., Rennie, A. & Clement, M., 03/2015. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  78. Published

    Catalytic Routes towards Acrylic Acid, Adipic Acid and ε-Caprolactam starting from Biorenewables

    Beerthuis, R., Rothenberg, G. & Raveendran, S., 1/03/2015, In: Green Chemistry. 17, p. 1341-1361 21 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  80. Published

    Detecting energy dependent neutron capture distributions in a liquid scintillator

    Balmer, M., Gamage, K. & Taylor, G., 11/03/2015, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 776, p. 1-7 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  81. Published

    Development of a diffuse reflectance infrared fourier transform spectroscopy (DRIFTS) cell for the in situ analysis of co-electrolysis in a solid oxide cell

    Cumming, D., Tumilson, C., Taylor, R., Chansai, S., Call, A., Jacquemin, J., Hardacre, C. & Elder, R., 12/03/2015, In: Faraday Discussions. 182, 97, p. 97-111 15 p., 182.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    An investigation of lithium-ion battery thermal management using paraffin/porous-graphite-matrix composite

    Greco, A., Jiang, X. & Cao, D., 15/03/2015, In: Journal of Power Sources. 278, p. 50–68 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  83. Unpublished

    (Invited) Development of klystrons with ultimately high - 90% RF power production efficiency

    Lingwood, C. J., 24/03/2015, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  84. Published

    Radiation enhanced broadband planar TEM horn antenna

    Li, Y., Yin, X., Zhao, H., Wang, L. & Yang, M., 26/03/2015, 2014 Asia-Pacific Microwave Conference. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  85. Published

    Carpet recycling: a review of recycled carpets for structural composites

    Sotayo, A., Green, S. & Turvey, G., 04/2015, In: Environmental Technology and Innovation. 3, p. 97-107 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Design and fabrication of a sheet beam BWO at 346 GHz

    Popovic, B., Himes, L., Gamzina, D., Luhmann Jr., N. C., Paoloni, C., Letizia, R., Mineo, M., Malek Abadi, A., Yue, L., Tang, X., Feng, J., Tang, Y., Gao, M. & Zhang, F., 04/2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, p. 1-2 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  87. Published

    Design of minimax-linear quadratic Gaussian controller using the frequency domain subspace identified model of flexible plate

    Ahmadizadeh, S., Montazeri, A. & Poshtan, J., 04/2015, In: Journal of Vibration and Control. 21, 6, p. 1115-1143 29 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    Enhancing the load capacity of pultruded GFRP beams via discrete load redistribution

    Turvey, G., 04/2015, In: Composite Structures. 122, p. 352-360 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Hexagonal uniformly redundant arrays (HURAs) for scintillator based coded aperture neutron imaging

    Gamage, K., Zhou, Q. & Hayes, S., 04/2015, p. 1-4. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  90. Published

    Hierarchical titania nanostructures prepared with focused ion beam-assisted anodisation of titanium in an aqueous electrolyte

    Yadav, P. K., Lemoine, P., Dale, G., Hamilton, J. W. J., Dunlop, P. S. M., Byrne, J. A., Mailley, P. & Boxall, C., 04/2015, In: Applied Physics A. 119, 1, p. 107-113 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  91. Published

    The lost crown of Horus

    Kaufman, J. & Rennie, A. E. W., 04/2015, Ancient Egypt, 15, 5, p. 22-23 2 p.

    Research output: Contribution to specialist publication › Article

  92. Published

    Engineering grain boundary sliding and cavitation effects in superplastic alloys employing thermodynamics

    Galindo-Nava, E. I., Torres-Villaseñor, G. & Rivera-Díaz-Del-Castillo, P. E. J., 1/04/2015, In: Materials Science and Technology (United Kingdom). 31, 6, p. 677-687 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    Impulse turbine injector design improvement using Computational Fluid Dynamics

    Benzon, D., Zidonis, A., Panagiotopoulos, A., Aggidis, G., Anagnostopoulos, J. & Papantonis, D., 1/04/2015, In: Journal of Fluids Engineering. 137, 4, 9 p., 041106.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    ZnO-based thin film transistors employing aluminum titanate gate dielectrics deposited by spray pyrolysis at ambient air

    Afouxenidis, D., Mazzocco, R., Vourlias, G., Livesley, P., Krier, A., Milne, W. I., Kolosov, O. & Adamopoulos, G., 8/04/2015, In: ACS Applied Materials and Interfaces. 7, 13, p. 7334-7341 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms

    Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  96. Published

    Neural network based real-time pricing in demand side management for future smart grid

    Gelazanskas, L. & Gamage, K., 10/04/2015, Power Electronics, Machines and Drives (PEMD 2014), 7th IET International Conference on. IEEE, p. 1-5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  97. Published

    Study of FePt deposited reduced graphene oxide's utility as a catalyst towards oxygen reduction and methanol oxidation reactions

    Kannan, R., Silva, A. A., Cardoso, F. M., Gupta, G., Aslam, Z., Sharma, S. & Steinberger-Wilckens, R., 14/04/2015, In: RSC Advances. 46, p. 36993-36998 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    Magnetic fusion energy plasma diagnostic needs novel THz BWOs

    Paoloni, C., Letizia, R., Mineo, M., Malek Abadi, A., Luhmann Jr., N. C., Popovic, B., Himes, L., Barchfeld, R., Gamzina, D., Yue, L., Tang, X., Feng, J., Tang, Y., Gao, M. & Zhang, F., 27/04/2015, Vacuum Electronics Conference (IVEC), 2015 IEEE International . IEEE, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  99. Published

    Deformation simulation of a tyre safety cage in testing of agricultural vehicle tyres

    Celik, H. K., Rennie, A. E. W., Dawson, D., Eatough, A., Eatough, J. & Akinci, I., 05/2015, Environmentally Friendly Agriculture and Forestry for Future Generations: International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015. Popov, V. D., Belyakov, V. V., Efimov, V. A., Selikhovkin, A. V., Shirokov, S. N., Ovchinnikova, E. I., Maksimov, D. A., Levchenko, L. V., Smelik, V. A., Ruzhev, V. A., Korostelev, A. A., Lepp, N. V., Shaytarova, O. E. & Belinskaya, I. V. (eds.). St Petersburg, Russian Federation: Saint Petersburg State Agrarian University, p. 172-183 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  100. Published

    Diffusion and swelling measurements in pharmaceutical powder compacts using terahertz pulsed imaging

    Yassin, S., Su, K., Lin, H., Gladden, L. F. & Zeitler, J. A., 05/2015, In: Journal of Pharmaceutical Sciences. 104, 5, p. 1658-1667 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  101. Published

    Discrete element modelling of unidirectional fibre-reinforced polymers under transverse tension

    Ismail, Y., Sheng, Y., Yang, D. & Ye, J., 05/2015, In: Composites Part B: Engineering. 73, p. 118-125 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...29 30 31 32 33 34 35 36 ...66 Next

Back to top