Home > Research > Publications & Outputs >

Research

« Back

Find by keywords:

Engineering

201 - 300 out of 704Page size: 100
  1. Published

    Narrow corrugation rectangular waveguide for terahertz TWTs

    Mineo, M. & Paoloni, C., 24/06/2010, In: Electronics Letters. 46, 13, p. 927-928 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Analysis of existing Additive manufacturing material selectors

    Hambali, R. H. & Rennie, A., 06/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  3. Published

    Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials

    Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    Corrugated Rectangular Waveguide Tunable Backward Wave Oscillator for Terahertz Applications

    Mineo, M. & Paoloni, C., 06/2010, In: IEEE Transactions on Electron Devices. 57, 6, p. 1481-1484 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Fire responses and resistance of concrete-filled steel tubular frame structures

    Yu, M., Zha, X., Ye, J. & Li, Y., 06/2010, In: International Journal of Structural Stability and Dynamics. 10, 2, p. 253-271 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  7. Published

    Design method for Double Corrugation Rectangular Waveguide THz vacuum amplifiers

    Mineo, M., Paoloni, C., Bariou, D., David, J.-F. & Durand, A. J., 1/05/2010, Vacuum Electronics Conference (IVEC), 2010 IEEE International. IEEE, p. 325 -326 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  8. Published

    Improved rod shapes for helix slow wave structures

    Mineo, M. & Paoloni, C., 1/05/2010, Vacuum Electronics Conference (IVEC), 2010 IEEE International. IEEE, p. 229-230 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  9. Published

    Non Contact Cable Testing

    Peyton, A. (Inventor), Coulton, P. (Inventor), Mackin, R. (Inventor) & John, K. (Inventor), 27/04/2010, Patent No. US7705606

    Research output: Patent

  10. Published

    A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & She, C., 04/2010, In: Engineering Structures. 32, 4, p. 1046-1053 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs

    Fu, F., Lam, D. & Ye, J., 03/2010, In: Journal of Constructional Steel Research. 66, 3, p. 452-461 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    The influence of joints and composite floor slabs on effective tying of steel structures in preventing progressive collapse

    Yu, M., Zha, X. & Ye, J., 03/2010, In: Journal of Constructional Steel Research. 66, 3, p. 442-451 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Initiation and propagation of transverse cracking in composite laminates

    Ye, J., Lam, D. & Zhang, D., 02/2010, In: Computational Materials Science. 47, 4, p. 1031-1039 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach

    Yang, J. & Ye, J., 01/2010, In: International Journal of Mechanical Sciences. 52, 1, p. 13-30 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    A CFD model of the laser, coaxial powder stream and substrate interaction in laser cladding

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, In: Physics Procedia. 5, B, p. 337-346 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    A numerical investigation of powder heating in coaxial laser direct metal deposition

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 455-458 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    A preliminary study of the hydrolysis of hydroxamic acid complexants in the presence of oxidising metal ions

    Andrieux, F. P. L., Boxall, C., May, I. & Taylor, R. J., 2010, In: IOP Conference Series: Materials Science and Engineering. 9, 1, p. - 8 p., 012081.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    A spectrophotometric study of cerium IV and chromium VI species in nuclear fuel reprocessing process streams

    Nickson, I. D., Boxall, C., Jackson, A. & Whillock, G. O. H., 2010, In: IOP Conference Series: Materials Science and Engineering. 9, 1, p. - 8 p., 012011.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    An iterative, energy-mass balance model for laser metal deposition

    Ahsan, M. N., Wang, W. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 149-158 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  20. Published

    Analytical Design Method for Corrugated Rectangular Waveguide SWS THz Vacuum Tubes

    Mineo, M., Di Carlo, A. & Paoloni, C., 2010, In: Journal of Electromagnetic Waves and Applications. 24, 17-18, p. 2479-2494 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Backward Wave Oscillator for THz Frequency Range Based on Double Corrugation Slow-Wave Structure

    Mineo, M., Bariou, D., David, J. F., Durand, A. J. & Paoloni, C., 2010, 35TH INTERNATIONAL CONFERENCE ON INFRARED, MILLIMETER, AND TERAHERTZ WAVES (IRMMW-THZ 2010). New York: IEEE, p. - 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  22. Published

    Composite Behaviour of Headed Stud Shear Connectors in Pairs with Profiled Metal Deck Flooring

    Lam, D., Ye, J. & Qureshi, J., 2010, 4th International Conference on Steel & Composite Structures.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published

    Discrete Element Method Simulation of the Damage Evolution in Cross-Ply Laminate under Tensile Loading

    Yang, D., Ye, J., Tan, Y. Q. & Sheng, Y., 2010, The Tenth International Conference on Computational Structures Technology. Topping, B. H. V., Adam, J. M., Pallares, F. J., Bru, R. & Romero, M. L. (eds.). Stirling: Civil-Comp Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  24. Published

    Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys

    Shah, K., Pinkerton, A. J., Salman, A. & Li, L., 2010, In: Materials and Manufacturing Processes. 25, 12, p. 1372-1380 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published
    No renderer
  26. Published

    Experimental and analytical evaluations of a torsio-elastic suspension for off-road vehicles

    Pazooki, A., Cao, D., Rakheja, S. & Boileau, P.-E., 2010, In: SAE International Journal of Materials and Manufacturing. 3, 1, p. 326-338 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Experimental studies of elliptical concrete-filled tube columns

    Jamaluddin, N., Lam, D. & Ye, J., 2010, TUBULAR STRUCTURES XIII. Young, B. (ed.). BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 333-340 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  28. Published

    Improved Design of Photonic Crystal Based Multiplexer/Demultiplexer Devices

    Selim, R., Pinto, D. & Obayya, S., 2010, In: IET Optoelectronics. 4, 4, p. 165-173 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Influence of melt pool convection on residual stress induced in laser cladding and powder deposition

    Kamara, A. M., Wang, W., Marimuthu, S., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    Interdigitated electrode array based sensors for environmental monitoring of caesium

    Nickson, I. D., Boxall, C. & Port, S. N., 2010, In: IOP Conference Series: Materials Science and Engineering. 9, 1, p. - 9 p., 012044.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Laser direct deposition of carbon steel machining waste

    Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1533-1540 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  32. Published

    Laser direct metal deposition: theory and applications in manufacturing and maintenance

    Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  33. Published

    Low-voltage, high-mobility transparent oxide transistors fabricated by spray coating

    Adamopoulos, G., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  34. Published

    Motivation of engineering students-considerations for programme design

    Green, S. & Meyer, J., 2010, p. P062. 9 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  35. Published

    Net shape laser butt welding of mild steel sheets

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2010, Proceedings of the 36th International Matador Conference. Hinduja, S. & Li, L. (eds.). London: Springer, p. 267-270 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  36. Published

    Novel Dual-Mesh Finite Volume Time Domain Method for the Analysis of Photonic Crystal Based Devices

    Pinto, D. & Obayya, S., 2010. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  37. Published

    Process characteristics of single mode fibre laser net shape welding

    Eghlio, R. M., Pinkerton, A. J., Sezer, H. K. & Li, L., 2010, Proceedings of the 4th Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  38. Published

    Real-time digital measurement gamma-neutron ratios in mixed radiation fields arising from standard isotopic sources

    Gamage, K., Joyce, M. & Hawkes, N., 2010, p. 12.1-12.6. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  39. Published

    Roll- and pitch-plane coupled hydro-pneumatic suspension. Part I Feasibility analysis and suspension properties

    Cao, D., Rakheja, S. & Su, C.-Y., 2010, In: Vehicle System Dynamics. 48, 3, p. 361-386 26 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2 dynamic response analyses

    Cao, D., Rakheja, S. & Su, C.-Y., 2010, In: Vehicle System Dynamics. 48, 4, p. 507-528 22 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications

    Shanjani, Y., Pinkerton, A. J. & Toyserkani, E., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 489-494 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  42. Published

    Solution Processed Ultra-violet Light Sensing ZnO Thin-film Transistors

    Wöbkenberg, P., Zimmerling, T., Bashir, A., Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  43. Published

    Terahertz Ring Resonator Based Photonic Crystals

    Selim, R., Pinto, D. & Obayya, S., 2010. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  44. Published

    Terahertz Ultra Fast Switching Device Based Photonic Crystals

    Selim, R., Pinto, D. & Obayya, S., 2010. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  45. Published

    The effect of beam geometry on diode laser forming of sheet metals

    Jamil, M. S. C., Pinkerton, A. J., Li, L. & Sheikh, M. A., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 495-502 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass

    Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2010, In: International Journal of Advanced Manufacturing Technology. 49, 1-4, p. 167-175 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass

    Nisar, S., Sheikh, M. A., Li, L., Pinkerton, A. J. & Safdar, S., 2010, In: Journal of Manufacturing Science and Engineering. 132, 1, 9 p., 011002.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    The influence of powder stream shape and substrate position on mass addition in laser cladding

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 24th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  49. Published
    No renderer
  50. Published

    X-ray analysis of pore formation in direct metal deposition and its causes

    Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 159-165 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  51. Published

    Parametric oscillations in distributed power amplifiers

    Narendra, K., Collantes, J. M., Paoloni, C. & Limiti, E., 3/12/2009, In: Electronics Letters. 45, 25, p. 1325-1326 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Efficient Second Harmonic Generation Through Selective Photonic Crystal-Microcavity Coupling

    Letizia, R. & Obayya, S. S. A., 1/11/2009, In: Journal of Lightwave Technology. 27, 21, p. 4763-4772 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)

    Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  54. Published

    Electronic properties of ZnO field-effect transistors fabricated by spray pyrolysis in ambient air

    Adamopoulos, G., Bashir, A., Wöbkenberg, P. H., Bradley, D. D. C. & Anthopoulos, T. D., 28/09/2009, In: Applied Physics Letters. 95, 13, 3 p., 133507.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    Torque ripple and variable blade force: A comparison of Darrieus and Gorlov-type turbines for tidal stream energy conversion

    Winchester, J. & Quayle, S., 8/09/2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  56. Published

    High frequency triode-type field emission device and process for manufacturing the same

    Di Carlo, A. (Inventor), Paoloni, C. (Inventor), Riccitelli, R. (Inventor), Brunetti, F. (Inventor) & Petrolati, E. (Inventor), 09/2009, IPC No. WO 2009/084054

    Research output: Patent

  57. Published

    Evolutionary Algorithms and high efficiency multiple beam klystron (MBK) design

    Lingwood, C., Carter, R. & Gunn, K., 7/08/2009, Vacuum Electronics Conference, 2009. IVEC '09. IEEE International. IEEE, p. 112-113 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  58. Published

    High Efficiency Multiple Beam Klystron (MBK) Stability

    Lingwood, C., Carter, R. & Burt, G., 7/08/2009, Vacuum Electronics Conference, 2009. IVEC '09. IEEE International. IEEE, p. 241-242 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  59. Published

    A new boundary element approach of modeling singular stress fields of plane V-notch problems

    Niu, Z., Cheng, C., Ye, J. & Recho, N., 1/08/2009, In: International Journal of Solids and Structures. 46, 16, p. 2999-3008 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  60. Published

    Accurate Multiresolution Time Domain Analysis of Microcavity Ring Resonator

    Letizia, R., Obayya, S. & Abujnah, N., 07/2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  61. Published

    Dispersive Multiresolution Time Domain for High Second Harmonic Generation Efficiency in One-Dimensional Periodic Grating

    Letizia, R. & Obayya, S., 07/2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  62. Published

    Development of a Motion Tracking 3D CAD Input System

    Abram, T., Benachour, P. & Vuong, T., 12/06/2009, p. 109-116. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  63. Published

    High-Performance Zinc Oxide Transistors and Circuits Fabricated by Spray Pyrolysis in Ambient Atmosphere

    Bashir, A., Woebkenberg, P., Smith, J., Ball, J., Adamopoulos, G., Bradley, D. & Anthopoulos, T., 5/06/2009, In: Advanced Materials. 21, p. 2226-2231 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Assistive CAD Tools: A Review of Automated Design Methods within Computer Aided Design

    Smith, P. & Rennie, A., 06/2009, Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on . Rennie, A., Bocking, C. & Jacobson, D. (eds.). High Wycombe: MJA Print, p. 17-25 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  65. Published

    Nonlinear control by input-output state variable feedback pole assignment

    Taylor, C. J., Chotai, A. & Young, P. C., 06/2009, In: International Journal of Control. 82, 6, p. 1029-1044 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Stabilizing global mean surface temperature: a feedback control perspective

    Jarvis, A., Leedal, D., Taylor, J. & Young, P., 05/2009, In: Environmental Modelling and Software. 24, 5, p. 665-674 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  67. Published

    Pulsed laser deposited tetrahedral amorphous carbon with high sp(3) fractions and low optical bandgaps

    Miyajima, Y., Henley, S. J., Adamopoulos, G., Stolojan, V., Garcia-Caurel, E., Drévillon, B., Shannon, J. M. & Silva, S. R. P., 15/04/2009, In: Journal of Applied Physics. 105, 7, p. 073521 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  68. Published

    Multiresolution Time Domain of Dispersive High-index Contrast Grating for Second Harmonic Generation

    Letizia, R. & Obayya, S., 6/04/2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  69. Published

    Dispersive multiresolution time domain scheme for second harmonic generation devices

    Letizia, R. & Obayya, S., 04/2009, Optical waveguide theory and numerical modeling XVIII International Workshop. Jena, Germany: Fraunhofer Institute for Applied Optics and Precision Engineering, p. 15 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract

  70. Published

    Laser and electron beams - evolving tools for surface engineering

    Pinkerton, A. J., 04/2009, In: Surface Engineering. 25, 3, p. 177-179 3 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  71. Published

    New configuration for optical waveguide power splitters

    Gannat, G. A., Pinto, D. & Obayya, S., 04/2009, In: IET Optoelectronics. 3, 2, p. 105-111 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  72. Published

    Synthesis of alpha- and beta-FeOOH iron oxide nanoparticles in non-ionic surfactant medium

    Bashir, S., McCabe, R. W., Boxall, C., Leaver, M. S. & Mobbs, D., 04/2009, In: Journal of Nanoparticle Research. 11, 3, p. 701-706 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  73. Published

    Evaluation of the stress singularities of plane V-notches in bonded dissimilar materials

    Niu, Z., Ge, D., Cheng, C., Ye, J. & Recho, N., 03/2009, In: Applied Mathematical Modelling. 33, 3, p. 1776-1792 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  74. Published

    THz Vacuum Amplifier: a European Project

    Paoloni, C., Di Carlo, A., Brunetti, F., Mineo, M. & Ulisse, G., 03/2009, Sif 2009 -Congresso Nazionale Societa’ Italiana Di Fisica. Italy

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  75. Published

    Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 02/2009, In: Acta Metallurgica et Materialia. 57, 4, p. 1220-1229 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass

    Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  77. Published

    A method and model for deposition of TI-6Al-4V with controlled porosity

    Ahsan, M. N. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 462-471 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  78. Published

    A review of suitable methods for producing automated or semi automated product designs for production using RM technologies

    Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  79. Published

    Analysis of a 3x1 Demultiplexer PhC Using CE-ADI-FDTD

    Selim, R., Pinto, D. & Obayya, S., 2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  80. Published

    Analysis of New Ultra-Fast PhC MUX/DEMUX

    Selim, R., Pinto, D. & Obayya, S., 2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  81. Published

    Behaviour of Headed Shear Stud in a Push Test using Profiled Steel Sheeting

    Qureshi, J., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 737-744 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  82. Published

    Coaxial laser cladding gas flows and their effects

    Ibarra-Medina, J., Pinkerton, A. J. & Paul, C. P., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  83. Published

    Coefficients for Theory of Adaptive Elasticity and its use in the FEA of remodeling processes in biological tissues

    Magatin, R., Ye, J. & Jin, Z., 2009, 3rd International Conference on Mechanics of Biomaterials and Tissues.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  84. Published

    Corrugated Waveguide Slow-Wave Structure for THz Travelling Wave Tube

    Mineo, M., Paoloni, C., Di Carlo, A., Fiorello, A. M. & Dispenza, M., 2009, 2009 EUROPEAN MICROWAVE CONFERENCE, VOLS 1-3. NEW YORK: IEEE, p. 842-845 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  85. Published

    Design of robust molecular electronic circuits.

    Lei, C., Pamunuwa, D. B., Bailey, S. & Lambert, C., 2009, IEEE International Symposium on Circuits and Systems, 2009. ISCAS 2009.. Taiwan: IEEE, p. 1819-1822 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  86. Published

    Design Study of Corrugated Waveguide Slow-Wave Structure for THz Amplification

    Mineo, M. & Paoloni, C., 2009, 2009 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 104-105 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  87. Published

    Designing reliable digital molecular electronic circuits.

    Lei, C., Pamunuwa, D. B., Bailey, S. & Lambert, C., 2009, Nano-Net 4th International ICST Conference, Nano-Net 2009, Lucerne, Switzerland, October 18-20, 2009. Proceedings. Schmid, A., Goel, S., Wang, W., Beiu, V. & Carrara, S. (eds.). Berlin: Springer, p. 111-115 5 p. (Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  88. Published

    Digital approaches to neutron spectrometry

    Hawkes, N., Gamage, K. & Taylor, G., 2009. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  89. Published

    Fibre laser net-shape welding of steels

    Eghlio, R. M., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1402-1408 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  90. Published

    Fibre laser welding of Zn-coated steel in Al alloy for next generation lightweight vehicles

    Chen, H.-C., Pinkerton, A. J., Li, L. & Mistry, A. T., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. Paper P104

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  91. Published

    Finite Element Analysis of Elliptical Stub CFT Columns

    Jamaluddin, N., Lam, D. & Ye, J., 2009, Steel Concrete Composite and Hybrid Structures. Lam, D. (ed.). Singapore: Research Publishing Services, p. 265-270 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  92. Published

    Fire resistance performance of FRP rebar reinforced concrete columns.

    Wang, H., Zha, X. & Ye, J., 2009, In: International Journal of Concrete Structures and Materials. 3, 2, p. 111-117 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    Helix TWT Yield Improvement by Helix Pitch Optimization

    Mineo, M. & Paoloni, C., 2009, 2009 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 159-160 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  94. Published

    High-Mobility Ambipolar Organic-Inorganic Hybrid Transistors (Invited)

    Smith, J., Bashir, A., Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  95. Published

    Oxide formation in acute laser percussion drilled holes in single crystal nickel superalloy

    Leigh, S., Sezer, K., Li, L., Pinkerton, A. J., Grafton-Reed, C. & Cuttell, M., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 719-728 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  96. Published

    Porous surface structures by continuous and pulsed laser metal deposition for biomedical applications

    Pinkerton, A. J., Ahsan, M. N., Paul, C. P. & Kukreja, L. M., 2009, Proceedings of the 23rd International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  97. Published

    Some aspects of neptunium acetohydroxamic acid chemistry under acidic conditions

    Sarsfield, M. J., Taylor, R. J., Boxall, C., Adrieux, F. & Sims, H. E., 2009, In: Radiochimica Acta. 97, 4-5, p. 219-222 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    Surface Defect Detection in non ferromagnetic material using an Electromagnetic Acoustic Transducer

    Thomas, S., Obayya, S., Pinto, D., Dulay, D., Balachandran, W. & Darwish, M., 2009, In: Journal of Materials Science and Engineering. 3, 12

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  99. Published

    The European Project OPTHER for the development of a THz tube amplifier

    Di Carlo, A., Paoloni, C., Brunetti, F., Terranova, M. L., Durand, A., Marchesin, R., Pham, K., Krozer, V., Fiorello, A., Dispenza, M., Pribat, D., Megtert, S., Schnell, J. P., Guiset, P., Legagneux, P., Dolfi, D. & de Rossi, A., 2009, 2009 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 100-101 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  100. Published

    The significance of melt pool variables in laser direct deposition of functionally graded aerospace alloys

    Shah, K., Salman, A., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 569-576 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1 2 3 4 5 6 7 8 Next

Back to top