Home > Research > Researchers > Dr Xiandong Ma > Publications

Dr Xiandong Ma

Senior Lecturer

  1. 2018
  2. E-pub ahead of print

    Wind turbine fault detection and identification through PCA-based optimal variable selection

    Wang, Y., Ma, X. & Qian, P. 6/02/2018 In : IEEE Transactions on Sustainable Energy. 9 p.

    Research output: Contribution to journalJournal article

  3. 2017
  4. Published

    State-of-the-art forecasting algorithms for microgrids

    Ma, J. & Ma, X. 26/10/2017 23rd International Conference on Automation and Computing (ICAC),2017. IEEE

    Research output: Contribution in Book/Report/ProceedingsConference contribution

  5. Published

    Estimating Health Condition of the Wind Turbine Drivetrain System

    Qian, P., Ma, X. & Zhang, D. 12/10/2017 In : Energies. 2017, 10, 19 p., 1583

    Research output: Contribution to journalJournal article

  6. Published

    An integrated data-driven model-based approach to condition monitoring of the wind turbine gearbox

    Qian, P., Ma, X. & Cross, P. 12/07/2017 In : IET Renewable Power Generation. 11, 9, p. 1177-1185 9 p.

    Research output: Contribution to journalJournal article

  7. E-pub ahead of print

    Reducing neutral-point voltage fluctuation in NPC three-level active power filters

    Qian, P., Ma, X., Liu, G. & Chen, Z. 8/05/2017 In : Electrical Engineering. 12 p.

    Research output: Contribution to journalJournal article

  8. Published

    Effect of doubly fed induction generatortidal current turbines on stability of a distribution grid under unbalanced voltage conditions

    Zhang, D., Ma, X., Si , Y., Huang , C., Huang, B. & Li , . W. 13/02/2017 In : Energies. 10, 2, 14 p., 212

    Research output: Contribution to journalJournal article

  9. 2016
  10. Published

    A condition monitoring system for an early warning of developing faults in wind turbine electrical systems

    Ma, X., Cross, P. & Qian, P. 1/12/2016 In : Insight – Non-Destructive Testing and Condition Monitoring. 58, 12, p. 663-670 8 p.

    Research output: Contribution to journalJournal article

  11. Published

    Reducing sensor complexity for monitoring wind turbine performance using principal component analysis

    Wang, Y., Ma, X. & Joyce, M. J. 11/2016 In : Renewable Energy. 97, p. 444–456 13 p.

    Research output: Contribution to journalJournal article

  12. Published

    Fault diagnosis in multi-machine power systems using the Derivative-free nonlinear Kalman Filter

    Rigatos, G., Siano, P., Wira, P. & Ma, X. 13/06/2016 Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016 IEEE Workshop on. IEEE, 6 p.

    Research output: Contribution in Book/Report/ProceedingsConference contribution

  13. Published

    Simultaneous fault detection and sensor selection for condition monitoring of wind turbines

    Zhang, W. & Ma, X. 12/04/2016 In : Energies. 9, 4, 15 p., 280

    Research output: Contribution to journalJournal article

  14. 2015
  15. Published

    University collaboration improves Mimic condition monitoring

    Ma, X. & Briddon, M. 23/09/2015 The Motorship Magazine - insight for marine technology professionals

    Research output: Contribution to specialist publicationFeatured article

  16. Published

    Condition monitoring of wind turbines based on extreme learning machine

    Qian, P., Ma, X. & Wang, Y. 12/09/2015 ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.

    Research output: Contribution in Book/Report/ProceedingsPaper

  17. Published

    Fault ride-through analysis and protection of a 2-MW DFIG tidal current turbine

    Zhang, D., Chen, Y., Yang, J., Tan, M., Ma, X. & Li, W. 1/09/2015 In : Marine Technology Society Journal . 49, 5, p. 49-57 9 p.

    Research output: Contribution to journalJournal article

  18. Published

    Model-based and fuzzy logic approaches to condition monitoring of operational wind turbines

    Cross, P. & Ma, X. 02/2015 In : International Journal of Automation and Computing. 12, 1, p. 25-34 10 p.

    Research output: Contribution to journalJournal article

  19. 2014
  20. Published

    Monitoring degradation in the field

    Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M. 30/12/2014 The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.

    Research output: Contribution in Book/Report/ProceedingsChapter (peer-reviewed)

  21. Published

    Nonlinear system identification for model-based condition monitoring of wind turbines

    Cross, P. & Ma, X. 11/2014 In : Renewable Energy. 71, p. 166-175 10 p.

    Research output: Contribution to journalJournal article

  22. 2013
  23. Published

    Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations

    Ma, X., Wang, Y. & Qin, J. 12/2013 In : Applied Energy. 112, p. 1475–1482 8 p.

    Research output: Contribution to journalJournal article

  24. Published

    Improved control of individual blade pitch for wind turbines

    Zhang, D., Cross, P., Ma, X. & Li, W. 15/08/2013 In : Sensors and Actuators A: Physical. 198, p. 8-14 7 p.

    Research output: Contribution to journalJournal article

  25. Published

    A novel condition monitoring and real-time simulation system for wind turbines

    Ma, X. & Cross, P. 4/02/2013 Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition. Vienna: EWEA, 9 p.

    Research output: Contribution in Book/Report/ProceedingsPaper

  26. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Ma, X. & Liu, L. 2013

    Research output: Contribution to conference Conference paper

  27. Published

    Design of a reconfigurable platform for navigation signal simulation

    Ming, D., Zhong, X., Liu, L. & Ma, X. 2013 In : Journal of Networks. 8, 5, p. 1019-1026 8 p.

    Research output: Contribution to journalJournal article

  28. Published

    Enhancing condition monitoring of distributed generation systems through optimal sensor selection

    Wang, Y., Ma, X. & Joyce, M. 2013 Industrial Electronics Society, IECON 2013 - 39th Annual Conference of the IEEE. Piscataway, N.J.: IEEE, p. 7610-7616 7 p.

    Research output: Contribution in Book/Report/ProceedingsPaper

  29. Published

    Experimental and analytical study on factors influencing biomimetic undulating fin propulsion performance based on orthogonal experimental design

    Wang, G., Ma, X., Hua, T. & Zhang, D. 2013 In : Advanced Robotics. 27, 8, p. 597-609 13 p.

    Research output: Contribution to journalJournal article

  30. Published

    Feature selection for artificial neural network model-based condition monitoring of wind turbines

    Cross, P. & Ma, X. 2013 Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.

    Research output: Contribution in Book/Report/ProceedingsPaper

  31. Published

    Model-based condition monitoring for wind turbines

    Cross, P. & Ma, X. 2013 Automation and Computing (ICAC), 2013 19th International Conference on. IEEE, 7 p.

    Research output: Contribution in Book/Report/ProceedingsPaper

  32. Published

    State dependent parameter model-based condition monitoring for wind turbines

    Cross, P. & Ma, X. 2013 Proceedings of the 10th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies (CM 2013 & MFPT 2013). BINDT, 12 p.

    Research output: Contribution in Book/Report/ProceedingsPaper

  33. 2012
  34. Published

    Investigations of the state-of-the-art methods for electromagnetic NDT and electrical condition monitoring

    Ma, X. 09/2012 In : Insight – Non-Destructive Testing and Condition Monitoring. 54, 9, p. 482-488 7 p.

    Research output: Contribution to journalJournal article

  35. Published

    Optimal sensor selection for wind turbine condition monitoring using multivariate principal component analysis approach

    Wang, Y., Ma, X. & Joyce, M. 09/2012 7 p.

    Research output: Contribution to conference Conference paper

  36. Published

    Generic model of a community-based microgrid integrating wind turbines and photovoltaics

    Ma, X., Qin, J. & Wang, Y. 07/2012 p. 3147-3153 7 p.

    Research output: Contribution to conference Conference paper

  37. Published

    A remote condition monitoring system for wind-turbine based DG systems

    Ma, X., Wang, G., Cross, P. & Zhang, X. 31/05/2012 In : Journal of Physics: Conference Series. 364, 1, 7 p.

    Research output: Contribution to journalJournal article

  38. Published

    Novel early warning fault detection for wind-turbine-based DG systems

    Ma, X. 5/03/2012 Proceedings of 2011 2nd IEEE PES International Conference and Exhibition on Innovative Smart Grid Technologies (ISGT Europe): 5-7 Dec. 2011, Manchester, UK. IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/ProceedingsConference contribution

  39. Published

    A GPGPU accelerated compressed sensing with tight wavelet frame transform technique for MR imaging reconstruction

    Hu, B., Ma, X., Joyce, M., Glover, P. & Naleem, B. 2012 Imaging Systems and Techniques (IST), 2012 IEEE International Conference on. IEEE, p. 121-125 5 p.

    Research output: Contribution in Book/Report/ProceedingsPaper

  40. 2011
  41. Published

    Electromagnetic NDT and condition monitoring - A personal view

    Ma, X. 21/11/2011 Proceedings of 2011 17th International Conference on Automation and Computing (ICAC’11): 10 Sept. 2011, Huddersfield, UK. IEEE, p. 266-271 6 p.

    Research output: Contribution in Book/Report/ProceedingsConference contribution

  42. Published

    Online intelligent condition monitoring of electrical machines.

    Ma, X. 05/2011 p. 223-228 6 p.

    Research output: Contribution to conference Conference paper

  43. Published

    Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model

    Gu, J., Feng, Z., Ma, X. & Ni, J. 2011 In : Applied Mechanics and Materials. 48-49, p. 1323-1327 5 p.

    Research output: Contribution to journalJournal article

  44. 2010
  45. Unpublished

    Analysis and verification of fuel exhaust emissions.

    Ma, X. 2/12/2010 12 p.

    Research output: Working paper

  46. Published

    Feature detection and monitoring of eddy current imaging data by means of wavelet based singularity analysis.

    Ma, X. & Peyton, A. J. 11/2010 In : NDT and E International. 43, 8, p. 687-694 8 p.

    Research output: Contribution to journalJournal article

  47. Unpublished
  48. Published

    A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.

    Liu, G., Joyce, M. J., Ma, X. & Aspinall, M. 06/2010 In : IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691

    Research output: Contribution to journalJournal article

  49. 2009
  50. Published

    An investigation of the digital discrimination of neutrons and γ rays with organic scintillation detectors using an artificial neural network.

    Liu, G., Aspinall, M., Ma, X. & Joyce, M. J. 21/08/2009 In : Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 607, 3, p. 620-628 9 p.

    Research output: Contribution to journalJournal article

  51. Published

    Control systems for WRASPA.

    Chaplin, R., Rahmati, R., Gunura, K., Ma, X. & Aggidis, G. A. 06/2009 93 p.

    Research output: Contribution to conference Conference paper

  52. Published
  53. 2008
  54. Published

    Development of multiple frequency electromagnetic induction systems for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P. 24/07/2008 In : Measurement Science and Technology. 19, 9, 10 p., 094008

    Research output: Contribution to journalJournal article

  55. Published

    Electromagnetic detection system

    Lionheart, W. R. B., Ma, X. & Peyton, A. J. 2008 WO2008087385-A2; EP2108132-A2; GB2459790-A; CA2675587-A1; WO2008087385-A3; WO2008087385-A8; CN101688925-A; US2010207624-A

    Research output: Patent

  56. 2007
  57. Published

    Dynamic imaging in electrical capacitance tomography and electromagnetic induction tomography using a Kalman filter.

    Soleimani, M., Vauhkonen, M., Yang, W. Q., Peyton, A. J., Kim, B. S. & Ma, X. 11/2007 In : Measurement Science and Technology. 18, 11, p. 3287-3294 8 p.

    Research output: Contribution to journalJournal article

  58. Published

    Developments of multiple frequency electromagnetic induction system for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P. 09/2007 8 p.

    Research output: Contribution to conference Conference paper

  59. Published

    Dynamic magnetic induction tomography imaging of molten metal flow using the Kalman filter.

    Soleimani, M., Ma, X. & Peyton, A. J. 09/2007 5 p.

    Research output: Contribution to conference Conference paper

  60. Published

    Linear EMT for the detection of faults in metallic planar structures (DIF).

    Yin, W., Ma, X., Zysko, G. & Peyton, A. J. 09/2007 7 p.

    Research output: Contribution to conference Conference paper

  61. Published

    Imaging internal structure with electromagnetic induction tomography.

    Ma, X., Peyton, A. J., Soleimani, M. & Lionheart, W. R. B. 12/03/2007 Instrumentation and Measurement Technology Conference, 2006. IMTC 2006. Proceedings of the IEEE. IEEE, p. 299 -303

    Research output: Contribution in Book/Report/ProceedingsChapter

  62. Unpublished

    Feasibility study for tomographic walk-through metal detector.

    Ma, X., Peyton, A. J. & Lionheart, W. R. B. 01/2007 Unpublished, 12 p.

    Research output: Working paper

  63. 2006
  64. Published

    Eddy current measurements of electrical conductivity and magnetic permeability of porous metals.

    Ma, X., Peyton, A. J. & Zhao, Y. Y. 10/2006 In : NDT and E International. 39, 7, p. 562 -568

    Research output: Contribution to journalJournal article

  65. Published

    A three-dimensional inverse finite-element method applied to experimental eddy-current imaging data.

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J., Ma, X. & Higson, S. R. 05/2006 In : IEEE Transactions on Magnetics. 42, 5, p. 1560 -1567

    Research output: Contribution to journalJournal article

  66. Published

    Eddy current measurement of the electrical conductivity and porosity of metal foams.

    Ma, X. & Peyton, A. J. 03/2006 In : IEEE Transactions on Instrumentation and Measurement. 55, 2, p. 570-576 7 p.

    Research output: Contribution to journalJournal article

  67. Published

    Hardware and software design for an electromagnetic induction tomography (EMT) system for high contrast metal process applications.

    Ma, X., Peyton, A. J., Higson, S. R., Lyons, A. & Dickinson, S. J. 01/2006 In : Measurement Science and Technology. 17, 1, p. 111-118 8 p.

    Research output: Contribution to journalJournal article

  68. 2005
  69. Published

    A 3D inverse finite element technique applied to experimental magnetic induction tomography data.

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X. 09/2005 6 p.

    Research output: Contribution to conference Conference paper

  70. Published

    Development of a fast electromagnetic induction tomography system for metal process applications.

    Ma, X., Higson, S. R., Lyons, A. & Peyton, A. J. 09/2005 6 p.

    Research output: Contribution to conference Conference paper

  71. Published

    Measurement of the electrical conductivity of open-celled aluminium foam using non-contact eddy current techniques.

    Ma, X., Peyton, A. J. & Zhao, Y. Y. 07/2005 In : NDT and E International. 38, 5, p. 359 -367

    Research output: Contribution to journalJournal article

  72. Published

    Magnetic induction tomography : image reconstruction on experimental data from various applications.

    Soleimani, M., Ktistis, C., Ma, X., Yin, W., Lionheart, W. R. B. & Peyton, A. J. 06/2005 4 p.

    Research output: Contribution to conference Conference paper

  73. Published

    Electromagnetic techniques for imaging the cross-section distribution of molten steel flow in the continuous casting nozzle.

    Ma, X., Peyton, A. J., Binns, R. & Higson, S. R. 04/2005 In : IEEE Sensors Journal. 5, 2, p. 224-232 9 p.

    Research output: Contribution to journalJournal article

  74. 2004
  75. Published

    Eddy current measurement of the electrical conductivity and porosity of metal foams.

    Ma, X. & Peyton, A. J. 8/11/2004 Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1, p. 127-132 6 p.

    Research output: Contribution in Book/Report/ProceedingsChapter

  76. Published

    Novel computer-based processing system for partial discharge detection and diagnosis.

    Ma, X., Zhou, C. & Kemp, I. J. 8/11/2004 Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1, p. 684-688 5 p.

    Research output: Contribution in Book/Report/ProceedingsChapter

  77. Published

    Molten metal flow visualisation using mutual induction tomography (MIT).

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X. 2004 2004 Proceedings of the ASME 7th Biennial Conference on Engineering Systems Design & Analysis. Vol. 1, 6 p.

    Research output: Contribution in Book/Report/ProceedingsChapter

  78. 2003
  79. Published

    Development of a virtual instrument system for industrial process tomography.

    Deloughry, R., Davenport, I., Ma, X. & Ponnapalli, P. V. S. 09/2003 5 p.

    Research output: Contribution to conference Conference paper

  80. Published

    Image reconstruction in 3D magnetic induction tomography using a FEM forward model.

    Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X. 09/2003 4 p.

    Research output: Contribution to conference Conference paper

  81. Published

    Imaging the flow profile of molten steel through a submerged pouring nozzle.

    Ma, X., Peyton, A. J., Binns, R. & Higson, S. R. 09/2003 7 p.

    Research output: Contribution to conference Conference paper

  82. Published

    Optimal algorithms for wavelet-based denoising in PD measurement.

    Zhou, C., Ma, X. & Kemp, I. J. 08/2003 4 p.

    Research output: Contribution to conference Conference paper

  83. 2002
  84. Published

    Wavelets for the analysis and compression of partial discharge data.

    Ma, X., Zhou, C. & Kemp, I. J. 7/08/2002 Conference on Electrical Insulation and Dielectric Phenomena, 2001 Annual Report.. IEEE, p. 329-334 6 p.

    Research output: Contribution in Book/Report/ProceedingsChapter

  85. Published

    DSP based partial discharge characterisation by wavelet analysis.

    Ma, X., Zhou, C. & Kemp, I. J. 6/08/2002 Proceedings. ISDEIV. XIXth International Symposium on Discharges and Electrical Insulation in Vacuum, 2000.. IEEE, Vol. 2, p. 780 -783

    Research output: Contribution in Book/Report/ProceedingsChapter

  86. Published

    Investigation into the use of wavelet theory for partial discharge pulse extraction in electrically noisy environments.

    Ma, X., Zhou, C. & Kemp, I. J. 6/08/2002 Dielectric Materials, Measurements and Applications, 2000. Eighth International Conference on (IEE Conf. Publ. No. 473). IEE, p. 123-126 4 p.

    Research output: Contribution in Book/Report/ProceedingsChapter

  87. Published

    PD pulse propagation studies using the wavelet transform.

    Ma, X., Zhou, C. & Kemp, I. J. 6/08/2002 Electrical Insulation and Dielectric Phenomena, 2000 Annual Report Conference on. IEEE, Vol. 2, p. 626 -629

    Research output: Contribution in Book/Report/ProceedingsChapter

  88. Published

    Interpretation of wavelet analysis and its application in partial discharge detection.

    Ma, X., Zhou, C. & Kemp, I. J. 06/2002 In : IEEE Transactions on Dielectrics and Electrical Insulation. 9, 3, p. 446-457 12 p.

    Research output: Contribution to journalJournal article

  89. Published

    Automated wavelet selection and thresholding for PD detection.

    Ma, X., Zhou, C. & Kemp, I. J. 04/2002 In : IEEE Electrical Insulation Magazine. 18, 2, p. 37-45 9 p.

    Research output: Contribution to journalJournal article

  90. 2000
  91. Published

    A feasibility study into the use of wavelet transform in partial discharge analysis.

    Ma, X., Zhou, C. & Kemp, I. J. 09/2000 5 p.

    Research output: Contribution to conference Conference paper

  92. 1999
  93. Published

    Small-sized real-time digital simulator for the test of protective relay.

    Liang, Z., Ma, X., Wang, H., Chen, Y. & Wang, L. 12/1999 In : Dianli Xitong Zidonghue/Automation of Electric Power Systems. 23, 23, p. 27-30 4 p.

    Research output: Contribution to journalJournal article

  94. 1998
  95. Published

    A portable multi-functional real-time digital simulator dedicated to protective relay testing

    Liang, Z., Ma, X., Wang, H. & Wang, L. 12/1998 In : Electricity. 9, 4, p. 27-29 3 p.

    Research output: Contribution to journalJournal article

  96. 1997
  97. Published

    Real-time digital simulator (RTDS) and it applications

    Liang, Z., Ma, X., Wang, L., Kuffel, R. & Jiang, X. 10/1997 In : Dianli Xitong Zidonghue/Automation of Electric Power Systems. 21, 10, p. 61-64 4 p.

    Research output: Contribution to journalJournal article

  98. 1993
  99. Published

    Digital power system simulators applied to protective relay testing

    Wu, J., Liang, Z., Ma, X. & Wang, H. 11/1993 In : Dianli Xitong Zidonghue/Automation of Electric Power Systems. 17, 11, p. 47-51 4 p.

    Research output: Contribution to journalJournal article

  100. 1991
  101. Published

    Development of communication simulation software for TMS32010 multi-processor parallel system

    Ma, X. & Wu, J. 1991 In : Industrial Control Computer. p. 37-39 3 p.

    Research output: Contribution to journalJournal article

  102. 1990
  103. Published

    Functional simulation of logic digital system with microprocessor

    Ma, X. & Wu, J. 1990 In : Dianli Xitong Zidonghue/Automation of Electric Power Systems. 14, 3, p. 57-64 8 p.

    Research output: Contribution to journalJournal article

Back to top