Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

2201 - 2300 out of 6,515Page size: 100
RSS feed of this list
  1. 2010
  2. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on

    Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2010, CRDM Ltd. 222 p.

    Research output: Book/Report/Proceedings › Book

  3. Published

    Real-time digital measurement gamma-neutron ratios in mixed radiation fields arising from standard isotopic sources

    Gamage, K., Joyce, M. & Hawkes, N., 2010, p. 12.1-12.6. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  4. Published

    Real-time digital neutron/γ discrimination in non-flammable fast scintillators.

    Joyce, M. J., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  5. Published

    Roll- and pitch-plane coupled hydro-pneumatic suspension. Part I Feasibility analysis and suspension properties

    Cao, D., Rakheja, S. & Su, C.-Y., 2010, In: Vehicle System Dynamics. 48, 3, p. 361-386 26 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2 dynamic response analyses

    Cao, D., Rakheja, S. & Su, C.-Y., 2010, In: Vehicle System Dynamics. 48, 4, p. 507-528 22 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications

    Shanjani, Y., Pinkerton, A. J. & Toyserkani, E., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 489-494 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  8. Published

    Separation of antibiotics from aqueous solution using ionic liquids and supercritical carbon dioxide

    Manic, M. S. & Najdanovic-Visak, V., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  9. Published

    SÍNTESE DE BIODIESEL A PARTIR DE BORRAS DE CAFÉ POR TRANSESTERIFICAÇÃO DIRECTA COM MISTURAS ÁLCOOL/DIÓXIDO DE CARBONO

    Najdanovic-Visak, V. (Inventor), Simões, P. M. C. (Inventor), do Couto, R. M. T. (Inventor), Beja Fernandes , J. L. (Inventor) & de Oliveira Calixto , F. M. (Inventor), 2010, Patent No. PT104506-A1

    Research output: Patent

  10. Published

    Solution Processed Ultra-violet Light Sensing ZnO Thin-film Transistors

    Wöbkenberg, P., Zimmerling, T., Bashir, A., Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  11. Published

    SpaciMS: spatial and temporal operando resolution of reactions within catalytic monoliths

    Sá, J., Fernandes, D. L. A., Aiouache, F., Goguet, A., Hardacre, C., Lundie, D., Naeem, W., Partridge, W. P. & Stere, C., 2010, In: Analyst. 135, 9, p. 2260-2272 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Surface decontamination by photocatalysis

    Wilbraham, R. J., Boxall, C. & Taylor, R. J., 2010, ASME 12th International Conference on Environmental Remediation and Radioactive Waste Management: Volume 2: Facility Decontamination and Decommissioning; Environmental Remediation; Environmental Management/Public Involvement. NEW YORK: AMER SOC MECHANICAL ENGINEERS, p. 185-193 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  13. Published

    Technological Progress Improves Plans for Sustainable Small-Scale Hydropower Generation

    Luchinskaya, E., Aggidis, G. & Howard, D. C., 2010, Reliable hydropower for a safe and sustainable power production: 16th International Seminar on Hydropower Plants. Vienna: Institute for Energy Systems and Thermodynamics, p. 795-804 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  14. Published

    Terahertz Ring Resonator Based Photonic Crystals

    Selim, R., Pinto, D. & Obayya, S., 2010. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  15. Published

    Terahertz Ultra Fast Switching Device Based Photonic Crystals

    Selim, R., Pinto, D. & Obayya, S., 2010. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract

  16. Published

    The Captain Toolbox

    Young, P. C., Taylor, C. J., Tych, W., Pedregal, D. J. & McKenna, P. G., 2010

    Research output: Exhibits, objects and web-based outputs › Software

  17. Published

    The effect of beam geometry on diode laser forming of sheet metals

    Jamil, M. S. C., Pinkerton, A. J., Li, L. & Sheikh, M. A., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 495-502 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Published

    The effect of continuous and pulsed beam modes on cut path deviation in diode laser cutting of glass

    Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2010, In: International Journal of Advanced Manufacturing Technology. 49, 1-4, p. 167-175 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    The effect of laser beam geometry on cut path deviation in diode laser chip-free cutting of glass

    Nisar, S., Sheikh, M. A., Li, L., Pinkerton, A. J. & Safdar, S., 2010, In: Journal of Manufacturing Science and Engineering. 132, 1, 9 p., 011002.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    The influence of powder stream shape and substrate position on mass addition in laser cladding

    Ibarra-Medina, J. & Pinkerton, A. J., 2010, Proceedings of the 24th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    Thermodynamic analysis of propane dry and steam reforming for synthesis gas or hydrogen production

    Wang, X., Wang, N., Zhao, J. & Wang, L., 2010, In: International Journal of Hydrogen Energy. 35, 23, p. 12800-12807 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Thermodynamic design of ultra-strong titanium alloys undergoing plasticity induced martensitic transformations

    Neelakantan, S., Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 2010, TMS 2010 - 139th Annual Meeting and Exhibition - Supplemental Proceedings. Vol. 3. p. 203-210 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  23. Published
    No renderer
  24. Published

    Wheelbase filtering and characterization of road profiles for vehicle dynamics

    Cao, D., Khajepour, A. & Song, X., 2010. 11 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  25. Published

    X-ray analysis of pore formation in direct metal deposition and its causes

    Ahsan, M. N., Bradley, R. & Pinkerton, A. J., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 159-165 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  26. Published

    An improved closed-form solution to interfacial stresses in plated beams using a two-stage approach

    Yang, J. & Ye, J., 01/2010, In: International Journal of Mechanical Sciences. 52, 1, p. 13-30 18 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Study of non-diffracting light beams from broad-stripe edge-emitting semiconductor lasers

    Sokolovskii, G. S., Dudelev, V. V., Losev, S. N., Deryagin, A. G., Vinokurov, D. A., Lyutetskii, A. V., Pikhtin, N. A., Slipchenko, S. O., Tarasov, I. S., Zolotovskaya, S., Rafailov, E. U., Kuchinskii, V. I. & Sibbett, W., 01/2010, In: Technical Physics Letters. 36, 1, p. 9-12 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Ultrashort-pulse lasers passively mode locked by quantum-dot-based saturable absorbers

    Lagatsky, A. A., Leburn, C. G., Brown, C. T. A., Sibbett, W., Zolotovskaya, S. & Rafailov, E. U., 01/2010, In: Progress in Quantum Electronics. 34, 1, p. 1-45 45 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Design and simulation of a multi-function MEMS sensor for health and usage monitoring.

    Xu, Z., Kotsov, D., Richardson, A., Li, L. & Begbie, M., 12/01/2010, In: Proceedings of IEEE Prognostics & System Health Management Conference. p. 1-7 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Geomagnetic disturbances on ground associated with particle precipitation during SC

    Safargaleev, V., Kozlovsky, A., Honary, F., Voronin, A. & Turunen, T., 22/01/2010, In: Annales Geophysicae. 28, 1, p. 247-265 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Initiation and propagation of transverse cracking in composite laminates

    Ye, J., Lam, D. & Zhang, D., 02/2010, In: Computational Materials Science. 47, 4, p. 1031-1039 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    ITG modes in the presence of inhomogeneous field-aligned flow

    Sen, S., McCarthy, D. R., Lontano, M., Lazzaro, E. & Honary, F., 02/2010, In: Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology. 165, 2, p. 180-186 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Unstable Rayleigh-Taylor modes in the ionosphere in the presence of dusts

    Fukuyama, A., Sen, S. & Honary, F., 02/2010, In: Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology. 165, 2, p. 123-133 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    A null phase-difference technique for ULF wave direction-finding

    Tullet, P. F. & Honary, F., 2/02/2010, In: Radiation Effects and Defects in Solids: Incorporating Plasma Science and Plasma Technology. 165, 2, p. 187-191 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    On the origin of high m magnetospheric waves

    Beharrell, M. J., Kavanagh, A. J. & Honary, F., 3/02/2010, In: Journal of Geophysical Research. 115, A02201, p. 1-12 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    A flexible streaming software architecture for scientific instruments

    Grill, M., Barratt, K. & Honary, F., 13/02/2010, In: Earth Science Informatics. p. 1-7 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    Correlation between TL and OSL signals in KMgF3:Ce3+: bleaching study of individual glow-peaks

    Dallas, G. I., Polymeris, G. S., Afouxenidis, D., Tsirliganis, N. C., Tsagas, N. F. & Kitis, G., 03/2010, In: Radiation Measurements. 45, 3-6, p. 537-539 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Generating the future: UK energy systems fit for 2050

    Kemp, R., Ion, S., Cumpsty, N., Fisk, D., Jenkins, N., Kelly, M., Loughhead, J. & Roberts, J., 03/2010, London: Royal Academy of Engineering. 30 p.

    Research output: Book/Report/Proceedings › Book

  39. Published

    Moment resistance and rotation capacity of semi-rigid composite connections with precast hollowcore slabs

    Fu, F., Lam, D. & Ye, J., 03/2010, In: Journal of Constructional Steel Research. 66, 3, p. 452-461 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    On signalling over through-silicon via (TSV) interconnects in 3-D integrated circuits.

    Weerasekera, R., Grange, M., Pamunuwa, D. B. & Tenhunen, H., 03/2010, p. 1325-1328. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  41. Published

    Profiling the depth of caesium-137 contamination in concrete via a relative linear attenuation model.

    Shippen, A. & Joyce, M. J., 03/2010, In: Applied Radiation and Isotopes. 68, 4-5, p. 631-634 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Simple Model of an Inductive Output Tube

    Carter, R., 03/2010, In: IEEE Transactions on Electron Devices. 57, 3, p. 720-725 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    The influence of joints and composite floor slabs on effective tying of steel structures in preventing progressive collapse

    Yu, M., Zha, X. & Ye, J., 03/2010, In: Journal of Constructional Steel Research. 66, 3, p. 442-451 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Thermally assisted OSL from deep traps in Al2O3:C

    Polymeris, G. S., Raptis, S., Afouxenidis, D., Tsirliganis, N. C. & Kitis, G., 03/2010, In: Radiation Measurements. 45, 3-6, p. 519-522 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    The influence of flow confinement on the rheological properties of complex fluids

    Yan, Y., Zhang, Z., Cheneler, D., Stokes, J. R. & Adams, M. J., 1/03/2010, In: Rheologica Acta. 49, 3, p. 255-266 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    What difference does a form make? A re-audit of a palliative care handover form for Out of Hours GPs.

    Callin, S., Gadoud, A., Leahy, H., Lambert, K. & Ward, J., 1/03/2010, In: Palliative Medicine. 24, 2, p. 241-2

    Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review

  47. Published

    Recent progress on a co-harmonic cyclotron resonant maser

    Constable, D. A., Ronald, K., He, W., Phelps, A. D. R. & Cross, A. W., 29/03/2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  48. Published

    Modeling and Eigenfrequency Analysis of Sound-Structure Interaction in a Rectangular Enclosure with Finite Element Method

    Mohamady, S., Ahmad, R. K. R., Montazeri, A., Zahari, R. & Jalil, N. A. A., 31/03/2010, In: Advances in Acoustics and Vibration. 9 p., 371297.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    A unified formulation for hollow and solid concrete-filled steel tube columns under axial compression

    Yu, M., Zha, X., Ye, J. & She, C., 04/2010, In: Engineering Structures. 32, 4, p. 1046-1053 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine

    Topakci, M., Celik, H. K., Canakci, M., Rennie, A., Akinci, I. & Karayel, D., 04/2010, In: Journal of Food, Agriculture and Environment. 8, 2, p. 531-536 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Physical modelling and advanced simulations of gas-liquid two-phase jet flows in atomization and sprays

    Jiang, X., Siamas, G. A., Jagus, K. & Karayiannis, T. G., 04/2010, In: Progress in Energy and Combustion Science. 36, 2, p. 131-167 37 p.

    Research output: Contribution to Journal/Magazine › Literature review › peer-review

  52. Unpublished

    The Launch of the Heron Corn Mill Hydro Plant(Invited Keynote Paper)

    Aggidis, G. A. & Brett, C., 3/04/2010, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  53. Published

    Non Contact Cable Testing

    Peyton, A. (Inventor), Coulton, P. (Inventor), Mackin, R. (Inventor) & John, K. (Inventor), 27/04/2010, Patent No. US7705606

    Research output: Patent

  54. Published

    General relationships for isovalent cation substitution into oxides with the rocksalt structure

    Murphy, S. T., Lu, H. & Grimes, R. W., 05/2010, In: Journal of physics and chemistry of solids. 71, 5, p. 735-738 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  55. Published

    A multi-mode MEMS sensor design to support system test and health & usage monitoring applications

    Xu, Z., Richardson, A., Koltsov, D., Li, L., Begbie, M. & Wang, C., 1/05/2010, Test Symposium (ETS), 2010 15th IEEE European. p. 263 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  56. Published

    Design method for Double Corrugation Rectangular Waveguide THz vacuum amplifiers

    Mineo, M., Paoloni, C., Bariou, D., David, J.-F. & Durand, A. J., 1/05/2010, Vacuum Electronics Conference (IVEC), 2010 IEEE International. IEEE, p. 325 -326 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  57. Published

    Improved rod shapes for helix slow wave structures

    Mineo, M. & Paoloni, C., 1/05/2010, Vacuum Electronics Conference (IVEC), 2010 IEEE International. IEEE, p. 229-230 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  58. Published

    A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.

    Liu, G., Joyce, M. J., Ma, X. & Aspinall, M., 06/2010, In: IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  59. Published

    A new ultrahigh-strength stainless steel strengthened by various coexisting nanoprecipitates

    Xu, W., Rivera-Díaz-Del-Castillo, P. E. J., Yan, W., Yang, K., San Martín, D., Kestens, L. A. I. & Van Der Zwaag, S., 06/2010, In: Acta Materialia. 58, 11, p. 4067-4075 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  60. Published

    Active minimization of harmonic sound pressure in a vibro—acoustic finite element model of a rectangular enclosure

    Mohamady , S. & Montazeri, A., 06/2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  61. Published

    Analysis of existing Additive manufacturing material selectors

    Hambali, R. H. & Rennie, A., 06/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  62. Published

    Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials

    Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  63. Published

    Corrugated Rectangular Waveguide Tunable Backward Wave Oscillator for Terahertz Applications

    Mineo, M. & Paoloni, C., 06/2010, In: IEEE Transactions on Electron Devices. 57, 6, p. 1481-1484 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Electric vehicles: charged with potential

    Kemp, R., Blythe, P., Brace, C., James, P., Parry-Jones, R., Thielens, D., Thomas, M., Wenham, R. & Urry, J., 06/2010, London: Royal Academy of Engineering. 52 p.

    Research output: Book/Report/Proceedings › Book

  65. Published

    Fire responses and resistance of concrete-filled steel tubular frame structures

    Yu, M., Zha, X., Ye, J. & Li, Y., 06/2010, In: International Journal of Structural Stability and Dynamics. 10, 2, p. 253-271 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Genetic design and characterization of novel ultra-high-strength stainless steels strengthened by Ni3Ti intermetallic nanoprecipitates

    Xu, W., Rivera-Díaz-del-Castillo, P. E. J., Wang, W., Yang, K., Bliznuk, V., Kestens, L. A. I. & van der Zwaag, S., 06/2010, In: Acta Materialia. 58, 10, p. 3582-3593 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  67. Published

    Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  68. Published

    Substrate contribution on carotenoids production in Blakeslea trispora cultivations

    Papaioannou, E. H. & Liakopoulou-Kyriakides, M., 06/2010, In: Food and Bioproducts Processing. 88, 2-3, p. 305-311 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    Narrow corrugation rectangular waveguide for terahertz TWTs

    Mineo, M. & Paoloni, C., 24/06/2010, In: Electronics Letters. 46, 13, p. 927-928 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  70. Published

    A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  71. Published

    Using additive manufacturing effectively: a CAD tool to support decision making

    Smith, P. & Rennie, A., 07/2010, 36th International MATADOR Conference. Hinduja, S. & Li, L. (eds.). Springer-Verlag, p. 381-384 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  72. Published

    Placing postgraduate research students at the heart of knowledge exchange: benefits for academia and industry

    Lambert, C. & Rennie, A., 1/07/2010, Proceedings of the 3rd International Symposium for Engineering Education (ISEE2010): educating engineers for a changing world : leading transformation from an unsustainable global society. p. 485-493 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  73. Published

    Components for the testing of a co-harmonic gyrotron cavity

    Constable, D. A., Ronald, K., He, W., Fampris, X. S., Phelps, A. D. R. & Cross, A. W., 15/07/2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  74. Published

    Control of a dual-arm robotic manipulator

    Taylor, C. J. & Seward, D., 08/2010, In: Nuclear Engineering International. 55, 673, p. 24-26 3 p.

    Research output: Contribution to Journal/Magazine › Journal article

  75. Published

    Discrete element modeling of the microbond test of fiber reinforced composite

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 08/2010, In: Computational Materials Science. 49, 2, p. 253-259 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    Rayleigh Taylor instability in a dusty plasma

    Sen, S., Fukuyama, A. & Honary, F., 08/2010, In: Journal of Atmospheric and Solar-Terrestrial Physics. 72, 13, p. 938-942 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  77. Published

    The Fender Stratocaster electric guitar: a case study for both non-transferable and transferable skills learning in a generalist electronic engineering cohort

    Joyce, M., 08/2010, In: IEEE Transactions on Education. 53, 3, p. 397-404 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    Vectorially combined distributed power amplifier with load pull impedance determination

    Narendra, K., Limiti, E., Paoloni, C., Collantes, J. M., Jansen, R. H. & Yarman, B. S., 5/08/2010, In: Electronics Letters. 46, 16, p. 1137-1138 2 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Finite element modelling of shear connection behaviour in a push test using profiled sheeting

    Qureshi, J., Lam, D. & Ye, J., 16/08/2010, Advances and Trends in Structural Engineering, Mechanics and Computation - Proceedings of the 4th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2010. CRC Press/Balkema, p. 679-682 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  80. Published

    Method for direct treatment of cork stoppers, using supercritical fluids

    Najdanovic-Visak, V. (Inventor), de Magalhaes Nunes da Ponte, M. L. (Inventor), da Silva Lopes, J. A. (Inventor), Manic, M. (Inventor), de Avelar Lopes Cardoso Mesquita, A. C. (Inventor), Moreira da Silva, R. P. (Inventor) & de Queroz Montenegro Sollari Allegro, I. M. (Inventor), 19/08/2010, Patent No. WO/2010/093273

    Research output: Patent

  81. Published

    Air-Stable Solution-Processed Hybrid Transistors with Hole and Electron Mobilities Exceeding 2 cm(2) V-1 s(-1)

    Smith, J., Bashir, A., Adamopoulos, G., Anthony, J. E., Bradley, D. D. C., Hamilton, R., Heeney, M., McCulloch, I. & Anthopoulos, T. D., 24/08/2010, In: Advanced Materials. 22, 32, p. 3598-3602 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  82. Published

    Captain toolbox analysis of the hyperfast switching peltier cooling system benchmark.

    Taylor, C. J. & Young, P. C., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 1082-1087 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  83. Published

    Continuous-time feed-forward proportional-integral-plus control.

    Cross, P., Taylor, C. J. & Aggidis, G. A., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 229-234 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  84. Published

    Digital approaches to field neutron spectrometry-NPL Report IR 23.

    Akurugoda Gamage, K. A., Hawkes, N. & Taylor, G., 09/2010, National Physical Laboratory.

    Research output: Working paper

  85. Published

    Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA

    Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  86. Published

    Multi-objective evolutionary optimisation of the geometry of a class of controlled wave energy converter.

    Gunn, K., Lingwood, C. & Taylor, C. J., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 349-354 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  87. Published

    Nonlinear control by input-output pole assignment: state space derivation.

    Taylor, C. J. & Chotai, A., 09/2010, UKACC International Conference Control 2010. Burnham, K. J. & Ersanilli, V. E. (eds.). p. 1076-1081 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  88. Published

    Skills development of employees at SMEs in the construction sector in the North of England

    Ganah, A. & Rennie, A., 09/2010, The Construction, Building and Real Estate Research Conference of the Royal Institution of Chartered Surveyors (COBRA 2010): Proceedings of. Royal Institution of Chartered Surveyors (RICS), 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  89. Published

    Structural optimisation of a subsoiler

    Topakci, M., Celik, H. K., Canakci, M., Karayel, D. & Rennie, A., 09/2010, In: Pakistan Journal of Scientific and Industrial Research. 53, 5, p. 281-287 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    Use of FDM in an undergraduate student project: design, build and test a model wind turbine

    Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  91. Published

    Cascaded distributed power amplifier with non-identical transistors and inter-stage tapered impedance

    Narendra, K., Limiti, E., Paoloni, C., Collantes, J.-M. & Jansen, R. H., 1/09/2010, Microwave Conference (EuMC), 2010 European. IEEE, p. 990 -993 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  92. Published

    Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams

    Turvey, G., 7/09/2010. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  93. Published

    Cross-stiffened circular plates: an elasto-plastic large deflection analysis

    Turvey, G., 14/09/2010.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  94. Published

    A novel cylindrical TE2,1 mode converter

    Constable, D., Ronald, K., He, W., Fampris, X. S., Whyte, C. G. & Robertson, C. W., 17/09/2010, In: Review of Scientific Instruments. 81, 9, 10 p., 094702.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  95. Published

    A Wavelet Packet Transform Inspired Method of Neutron-Gamma Discrimination.

    Shippen, D. I., Joyce, M. J. & Aspinall, M., 10/2010, In: IEEE Transactions on Nuclear Science. 57, 5, p. 2617-2624 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    An on-line monitoring technique for electrode degradation in bio-fluidic microsystems.

    Al-Gayem, Q., Liu, H., Richardson, A. M. D., Burd, N. & Kumar, M., 10/2010, Proceedings of the 2010 IEEE International Test Conference (ITC). Austin, Texas: IEEE, p. 1-10 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  97. Published

    State dependent control of a robotic manipulator used for nuclear decommissioning activities.

    Taylor, C. J., Chotai, A. & Robertson, D., 10/2010, IEEE RSJ International Conference on Intelligent Robots and Systems IROS 2010. Taipei, Taiwan, p. 2413-2418 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  98. Published

    Deep water ROV design for the Mexican oil industry

    Salgado-Jimenez, T., Gonzalez-Lopez, J. L., Martinez-Soto, L. F., Olguin-Lopez, E., Resendiz-Gonzalez, P. A. & Bandala-Sanchez, M., 14/10/2010, OCEANS'10 IEEE Sydney, OCEANSSYD 2010. 5603516. (OCEANS'10 IEEE Sydney, OCEANSSYD 2010).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  99. Published

    The Design, Build and Test of a Digital Analyzer for Mixed Radiation Fields.

    Joyce, M. J., Aspinall, M., Cave, F. D., Georgopoulos, K. & Jarrah, Z., 14/10/2010, In: IEEE Transactions on Nuclear Science. 57, 5, p. 2625-2630 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Heterogeneous photocatalysed degradation of an insecticide derivative acetamiprid in aqueous suspensions of semiconductor

    Khan, A., Haque, M. M., Mir, N. A., Muneer, M. & Boxall, C., 15/10/2010, In: Desalination. 261, 1-2, p. 169-174 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  101. Published

    Fidelity of energy spectra at neutron facilities for single-event effects testing

    Platt, S. P., Prokofiev, A. V. & Xiao, C. X., 20/10/2010, 2010 IEEE International Reliability Physics Symposium, IRPS 2010. IEEE, p. 411-416 6 p. 5488795. (IEEE International Reliability Physics Symposium Proceedings).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1...19 20 21 22 23 24 25 26 ...66 Next

Back to top