Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

4701 - 4800 out of 6,455Page size: 100
RSS feed of this list
  1. Published

    Corrosion behaviour of AGR simulated fuels: evolution of the fuel surface

    Rauff-Nisthar, N., Boxall, C., Farnan, I., Hiezl, Z., Lee, W., Perkins, C. & Wilbraham, R., 09/2013, In: ECS Transactions. 53, 21, p. 95-104 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  2. Published

    Corrosion behaviour of AGR SIMFUELS

    Rauff-Nisthar, N., Boxall, C., Hambley, D., Hiezl, Z., Padovani, C. & Wilbraham, R., 11/08/2015, In: ECS Transactions. 66, 17, p. 85-94 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Corrosion Behaviour of AGR Simulated Fuels (SIMFUELs)

    Rauff-Nisthar, N., 07/2022, Lancaster University. 381 p.

    Research output: Thesis › Doctoral Thesis

  4. Published

    Energy Return on Energy Invested (ERoEI) for photovoltaic solar systems in regions of moderate insolation: a comprehensive response

    Raugei, M., Sgouridis, S., Murphy, D., Fthenakis, V., Frischknecht, R., Breyer, C., Bardi, U., Barnhart, C., Buckley, A., Carbajales-Dale, M., Csala, D., de Wild-Scholten, M., Heath, G., Jæger-Waldau, A., Jones, C., Keller, A., Leccisi, E., Mancarella, P., Pearsall, N. & Siegel, A. & 2 others, Sinke, W. & Stolz, P., 03/2017, In: Energy Policy. 102, p. 377-384 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Intracavity generation of 610 nm light by periodically poled near-stoichiometric lithium tantalate

    Rautiainen, J., Okhotnikov, O. G., Eger, D., Zolotovskaya, S., Fedorova, K. A. & Rafailov, E. U., 29/01/2009, In: Electronics Letters. 45, 3, p. 177-179 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    A Novel Auxetic Stator Winding to Improve the Performance of Permanent Magnet Synchronous Electric Motors

    Ravanbod, M. & Montazeri, A., 2/04/2024, In: Engineering Research Express. 6, 1, 015095.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Accounting for the unique, doubly dual nature of ionic liquids from a molecular thermodynamic, and modeling standpoint

    Rebelo, L. P. N., Lopes, J. N. C., Esperanca, J. M. S. S., Guedes, H. J. R., Lachwa, J., Najdanovic-Visak, V. & Visak, Z. P., 11/2007, In: Accounts of Chemical Research. 40, 11, p. 1114-1121 8 p.

    Research output: Contribution to Journal/Magazine › Literature review › peer-review

  8. Published

    Phase behavior and thermodynamic properties of ionic liquids, ionic liquid mixtures, and ionic liquid solutions

    Rebelo, L., Najdanovic-Visak, V., de Azevedo, R., Esperanca, J., da Ponte, M., Guedes, H., Visak, Z. P., de Sousa, H., Szydlowski, J., Lopes, J. & Cordeiro, T., 2005, Ionic liquids III: fundamentals, progress, challenges, and opportunities. Rogers, R. D. & Seddon, K. R. (eds.). Washington, D. C.: American Chemical Society, p. 270-291 22 p. (ACS Symposium Series; vol. 901).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  9. Published

    A detailed thermodynamic analysis of [C(4)mim][BF4] plus water as a case study to model ionic liquid aqueous solutions

    Rebelo, L., Najdanovic-Visak, V., Visak, Z. P., da Ponte, M., Szydlowski, J., Cerdeirina, C., Troncoso, J., Romani, L., Esperanca, J., Guedes, H. & de Sousa, H., 2004, In: Green Chemistry. 6, 8, p. 369-381 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Double critical phenomena in (water plus polyacrylamides) solutions

    Rebelo, L., Visak, Z. P., de Sousa, H., Szydlowski, J., de Azevedo, R., Ramos, A. M., Najdanovic-Visak, V., da Ponte, M. & Klein, J., 26/02/2002, In: Macromolecules. 35, 5, p. 1887-1895 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Two ways of looking at Prigogine and Defay's equation

    Rebelo, L., Najdanovic-Visak, V., Visak, Z. P., da Ponte, M., Troncoso, J., Cerdeirina, C. & Romani, L., 2002, In: Physical Chemistry Chemical Physics. 4, 11, p. 2251-2259 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    High pressure vapor–liquid equilibrium for the ternary system ethanol/(±)-menthol/carbon dioxide

    Rebocho, S., V. M. Nunes, A., Najdanovic-Visak, V., Barreiros, S., Simões, P. M. C. & Paiva, A., 08/2014, In: Journal of Supercritical Fluids. 92, p. 282–287 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Experimental Determination and Modeling of the Phase Behavior of the CO2 + Propionic Anhydride Binary System at High Pressure

    Rebocho, S., V. M. Nunes, A., Najdanovic, V., Barreiros, S. & Paiva, A., 12/01/2017, In: Journal of Chemical and Engineering Data. 62, 1

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Necessity and suitability of in-line inspection for corrosion resistant alloy (CRA) clad pipelines

    Reda, A., Shanin, M. A., Sultan, I. A., Amaechi, C. V. & McKee, K. K., 2/09/2023, In: Ships and Offshore Structures. 18, 9, p. 1360-1366 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Case study for effects of pile installation on existing offshore facilities in brownfields

    Reda, A., Amaechi, C. V. & Shahin, M. A., 30/09/2023, In: Applied Ocean Research. 138, 103651.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Validation of a hybrid electric vehicle dynamics model for energy management and vehicle stability control

    Reeves, K., Montazeri, A. & Taylor, C. J., 8/06/2016, Industrial Electronics (ISIE), 2016 IEEE 25th International Symposium on. IEEE, p. 849-854 6 p. (Industrial Electronics (ISIE), 2016 IEEE 25th International Symposium on).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    Model development and energy management control for hybrid electric race vehicles

    Reeves, K., Montazeri, A. & Taylor, C. J., 31/08/2016, 2016 UKACC 11th International Conference on Control (CONTROL). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Published

    Integrated optimisation for dynamic modelling, path planning and energy management in hybrid race vehicles

    Reeves, K., 2021, Lancaster University. 268 p.

    Research output: Thesis › Doctoral Thesis

  19. Published

    Sparkling extreme-ultraviolet bright dots observed with Hi-C

    Régnier, S., Alexander, C. E., Walsh, R. W., Winebarger, A. R., Cirtain, J., Golub, L., Korreck, K. E., Mitchell, N., Platt, S., Weber, M., De Pontieu, B., Title, A., Kobayashi, K., Kuzin, S. & Deforest, C. E., 2014, In: The Astrophysical Journal. 784, 2, 11 p., 134.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Raman spectroscopic analysis of breast cancer tissues: Identifying differences between normal, invasive ductal carcinoma and ductal carcinoma in situ of the breast tissue

    Rehman, S., Movasaghi, Z., Tucker, A. T., Joel, S. P., Darr, J. A., Ruban, A. V. & Rehman, I. U., 2007, In: Journal of Raman Spectroscopy. 38, 10, p. 1345-1351 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Analysis of apatite layers on glass-ceramic particulate using FTIR and FT-Raman spectroscopy

    Rehman, I., Karsh, M., Hench, L. L. & Bonfield, W., 2000, In: Journal of Biomedical Materials Research Part A. 50, 2, p. 97-100 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Analysis of in vitro reaction layers formed on Bioglass® using thin- film X-ray diffraction and ATR-FTIR microspectroscopy

    Rehman, I., Knowles, J. C. & Bonfield, W., 1998, In: Journal of Biomedical Materials Research Part A. 41, 1, p. 162-166 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Characterization of hydroxyapatite and carbonated apatite by photo acoustic FTIR spectroscopy

    Rehman, I. & Bonfield, W., 1997, In: Journal of Materials Science: Materials in Medicine. 8, 1, p. 1-4 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    Fourier transform infrared analysis of poly(ester-urethanes) at low temperature in-situ by using a newly constructed liquid nitrogen cooled sample stage

    Rehman, I., Barnardo, C. & Smith, R., 1997, In: Journal of Materials Science. 32, 10, p. 2617-2621 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Biodegradable polyurethanes: biodegradable low adherence films for the prevention of adhesions after surgery

    Rehman, I. U., 1996, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 11, 2, p. 182-257 76 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    In situ analysis of the degree of polymerization of bone cement by using FT-Raman spectroscopy

    Rehman, I., Harper, E. J. & Bonfield, W., 1996, In: Biomaterials. 17, 16, p. 1615-1619 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    In vitro degradation of poly(ester-urethanes) for biomedical applications

    Rehman, I., Andrews, E. H. & Smith, R., 1996, In: Journal of Materials Science: Materials in Medicine. 7, 1, p. 17-20 4 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Characterization of synthetic and natural materials by Fourier transform Raman spectroscopy

    Rehman, I. U., 1995, In: Journal of Advanced Materials. 27, 1, p. 59-63 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Structural evaluation of human and sheep bone and comparison with synthetic hydroxyapatite by FT‐Raman spectroscopy

    Rehman, I., Smith, R., Hench, L. L. & Bonfield, W., 1/10/1995, In: Journal of Biomedical Materials Research Part A. 29, 10, p. 1287-1294 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Analysis of surface layers on bioactive glasses

    Rehman, I., Hench, L. L., Bonfield, W. & Smith, R., 1/08/1994, In: Biomaterials. 15, 10, p. 865-870 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Vibrational spectroscopy for tissue analysis: Vibrational Spectroscopy for Tissue Analysis

    Rehman, I. U., Movasaghi, Z. & Rehman, S., 2012, 1st ed. CRC Press. 303 p.

    Research output: Book/Report/Proceedings › Book

  32. Published

    Dental regeneration

    Rehman, I. U. & Khan, A. S., 2011, Electrospinning for Tissue Regeneration. Elsevier Inc., p. 280-297 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  33. Published

    Fourier transform infrared spectroscopic analysis of breast cancer tissues; Identifying differences between normal breast, invasive ductal carcinoma, and ductal carcinoma in situ of the breast

    Rehman, S., Movasaghi, Z., Darr, J. A. & Rehman, I. U., 2010, In: APPLIED SPECTROSCOPY REVIEWS. 45, 5, p. 355-368 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Role of artificial intelligence and vibrational spectroscopy in cancer diagnostics

    Rehman, I. U., Khan, R. S. & Rehman, S., 1/08/2020, In: Expert Review of Molecular Diagnostics. 20, 8, p. 749-755 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Special issue: clinical applications of spectroscopy

    Rehman, I. U., 26/11/2021, In: APPLIED SPECTROSCOPY REVIEWS. 56, 8-10, p. 613-614 2 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  36. Published

    Finite element analysis to support component level fault modelling for MEMS.

    Reichenbach, R., Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of SPIE design, test, integration and packaging of MEMS symposium. Vol. 4408. p. 147-158 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  37. Published

    The mechanical behaviour of silicon diaphragms for micromachined capacitive pressure sensor

    Ren, J., Cheneler, D. & Ward, M., 2008, In: Advances in Science and Technology. 54, p. 422-427 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Fast terahertz imaging using a quantum cascade amplifier

    Ren, Y., Wallis, R., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Beere, H. E. & Ritchie, D. A., 6/07/2015, In: Applied Physics Letters. 107, 1, 5 p., 011107.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Terahertz quantum cascade amplifier

    Ren, Y., Wallis, R., Shah, Y. D., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Kamboj, V., Beere, H. E. & Ritchie, D. A., 2015, 26th International Symposium on Space Terahertz Technology, ISSTT 2015. International Symposium on Space Terahertz Technology

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    Single mode terahertz quantum cascade amplifier

    Ren, Y., Wallis, R., Shah, Y. D., Jessop, D. S., Degl'Innocenti, R., Klimont, A., Kamboj, V., Beere, H. E. & Ritchie, D. A., 10/2014, In: Applied Physics Letters. 105, 14, 4 p., 141102.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Fast Terahertz imaging using a quantum cascade amplifier up to 20,000 pps

    Ren, Y., Wallis, R., Jessop, D. S., Degl'innocenti, R., Klimont, A., Beere, H. E. & Ritchie, D. A., 12/04/2016.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  42. Published

    Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion

    Ren, Y., Liang, L., Shan, Q., Cai, A., Du, J., Huang, Q., Liu, S., Yang, X., Tian, Y. & Wu, H., 31/12/2020, In: Virtual and Physical Prototyping. 15, S1, p. 543-554 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Microstructure, mechanical properties and biocompatibility of laser metal deposited Ti–23Nb coatings on a NiTi substrate

    Ren, Y., Du, J., Liu, B., Jiao, Z. B., Tian, Y., Baker, I. & Wu, H., 19/07/2022, In: Materials Science and Engineering: A. 848, 12 p., 143402.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. Published

    Microstructure, mechanical and tribological properties of a Ti-5Cu alloy and a B4C/Ti-5Cu in situ composite fabricated by laser powder bed fusion

    Ren, Y., Wu, H., Agbedor, S.-O., Lu, Y., Zhang, Y., Fang, Q., Li, J., Tian, Y. & Baker, I., 31/10/2022, In: Materials Characterization. 192, 9 p., 112217.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Effect of laser scannings speed on microstructure, tribological and corrosion behavior of Ti-23Nb alloys produced by laser metal deposition

    Ren, Y., Wu, H., Du, J., Liu, B., Wang, X., Jiao, Z., Tian, Y. & Baker, I., 31/03/2023, In: Materials Characterization. 197, 8 p., 112647.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on

    Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.

    Research output: Book/Report/Proceedings › Book

  47. Published

    Electroforming for Injection Moulding

    Rennie, A. E. W. & Bocking, C., 2002, In: State of the Art Report - RAPTIA European Thematic Network.

    Research output: Contribution to Journal/Magazine › Journal article

  48. Published

    The Fabrication of Electronic Packages from High Silicon Aluminium Alloys Using Thin Shell Electroformed (TSE) EDM Electrodes

    Rennie, A. E. W., Bennett, G., Bocking, C. & Jacobson, D., 1/05/2002, In: Transactions of the Institute of Metal Finishing. 80, 3, p. 92-96 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Electroforming of Rapid Prototyping Mandrels for Electro-Discharge Machining Electrodes

    Rennie, A. E. W., Bocking, C. E. & Bennett, G. R., 19/03/2001, In: Journal of Materials Processing Technology. 110, 2, p. 186-196 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Lancaster Virtual Prototyping Project: (GONW5167/8EUR – M4-07-LANC)

    Rennie, A. E. W., 15/11/2006, Proceedings of the 4th EU Best Practice Conference: New Horizons in Graz..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  51. Published

    Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on

    Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.

    Research output: Book/Report/Proceedings › Book

  52. Published

    Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on

    Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.

    Research output: Book/Report/Proceedings › Book

  53. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on

    Rennie, A. (Editor), Bocking, C. E. (Editor) & Jacobson, D. M. (Editor), 2009, MJA Print. 123 p.

    Research output: Book/Report/Proceedings › Book

  54. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on

    Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.

    Research output: Book/Report/Proceedings › Book

  55. Published

    Simulation and manufacture of wax toolfaces for the creation of silicone rubber tools using Magics™ RP software

    Rennie, A. & Bennett, G. R., 2000, In: International Journal of Engineering Simulation. 1, 3, p. 24-30 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    Electroforming for Injection Moulding

    Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  57. Published

    Rapid design, prototyping and manufacturing

    Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.

    Research output: Contribution to Journal/Magazine › Editorial

  58. Published

    Development of a Continuous Droplet Generation System of Molten Metals using Electromotive Forces, with a View to its use in the Rapid Tooling Industry

    Rennie, A. & Bennett, G. R., 07/1997, Proceedings of the Thirty-Second International Manufacturing, Automation and Systems, Technology, Applications, Design, Organisation and Management, Research (MATADOR) Conference. p. 399-403 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  59. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  60. Published

    Electroforming of a Stereolithography Master Pattern for use as an Electro-Discharge Machine electrode

    Rennie, A., Bocking, C. E. & Bennett, G. R., 07/2000, Proceedings of the 33rd International MATADOR Conference: Formerly The International Machine Tool Design and Research Conference. Springer-Verlag, p. 301-306 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  61. Published

    A transnational approach to the implementation of eco-design methodologies in SMEs

    Rennie, A., Lambert, C., Baker, N. & Hjelm, O., 10/07/2007, The proceedings of the 5th International Conference on Design & Manufacture for Sustainable Development : Loughborough University, 10th - 11th July 2007.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  62. Published

    A review of suitable methods for producing automated or semi automated product designs for production using RM technologies

    Rennie, A. & Smith, P., 2009, 14th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  63. Unpublished

    Consultancy and Support: Computer Aided Design & Engineering: (incorporating the Rapid Manufacturing North West & Sustainable Product Development sub-Projects) - Lancaster University Final Report

    Rennie, A., 10/2008, (Unpublished) N/A. 129 p.

    Research output: Book/Report/Proceedings › Commissioned report

  64. Unpublished

    Virtual Prototyping Phase III

    Rennie, A., 01/2007, (Unpublished) N/A. 54 p.

    Research output: Book/Report/Proceedings › Commissioned report

  65. Published

    Virtual Prototyping Phase II

    Rennie, A., 05/2006, N/A. 37 p.

    Research output: Book/Report/Proceedings › Commissioned report

  66. Published

    Virtual Prototyping

    Rennie, A., 07/2005, N/A. 77 p.

    Research output: Book/Report/Proceedings › Commissioned report

  67. Published

    Proceedings of the 14th Rapid Design, Prototyping and Manufacturing Conference

    Rennie, A. E. W. (Editor) & Bibb, R. (Editor), 2016, Lancaster: Lancaster University. 165 p.

    Research output: Book/Report/Proceedings › Proceedings

  68. Published

    University Programmes during COVID-19 Pandemic

    Rennie, A., Gamage, K. A. A. & Lambert, C., 14/12/2020, Scholarly Community Encyclopdeia: COVID-19. Basel, Switzerland: MDPI AG, 4 p. 4362

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary

  69. Published

    ABA regulated gene expression in stomatal guard cells of Commelina communis.

    Renwick, K. F., Webb, A. A. R., Sarsag, M., Shirras, A. D., Mansfield, T. A. & Hetherington, A. M., 1992, In: Journal of Experimental Botany. 43, Supple, p. P10.64

    Research output: Contribution to Journal/Magazine › Journal article

  70. Published

    Optical properties of metamorphic type-I InAs1-xSbx/AlyIn1-yAs quantum wells grown on GaAs for the mid-infrared spectral range

    Repiso Menendez, E., Broderick, C., de la Mata, M., Arkani, R., Lu, Q., Marshall, A., Molina, S., O'Reilly, E., Carrington, P. & Krier, A., 30/08/2019, In: Journal of Physics D: Applied Physics. 52, 10 p., 465102.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  71. Published

    FTIR analysis of natural and synthetic collagen

    Riaz, T., Zeeshan, R., Zarif, F., Ilyas, K., Muhammad, N., Safi, S. Z., Rahim, A., Rizvi, S. A. A. & Rehman, I. U., 1/09/2018, In: APPLIED SPECTROSCOPY REVIEWS. 53, 9, p. 703-746 44 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  72. Published

    Field emission vacuum triode: THz waveguide solutions for the transmission lines

    Riccitelli, R., Brunetti, F., Paoloni, C., Ulisse, G., Di Carlo, A. & Krozer, V., 2008, 2008 IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, p. 379-380 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  73. Published

    Innovative design of nano-vacuum triode

    Riccitelli, R., Brunetti, F., Petrolati, E., Paoloni, C., Di Carlo, A., Toschi, F., Terranova, M. L. & Cirillo, M., 2007, EIGHTH IEEE INTERNATIONAL VACUUM ELECTRONICS CONFERENCE. NEW YORK: IEEE, ELECTRON DEVICES SOC & RELIABILITY GROUP, p. 323-324 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  74. Published

    Innovative vacuum device flip-cathode based on carbon nanotubes field emitters

    Riccitelli, R., Paoloni, C., Brunetti, F., Ulisse, G., Di Carlo, A., sessa, V., Terranova, M. L., Cirillo, M. & Orlanducci, S., 06/2008, First Mediterranean Photonic Conference. Italy

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  75. Published

    Flip-cathode field emission vacuum triode for THz applications

    Riccitelli, R., Paoloni, C., Brunetti, F., Ulisse, G. & Di Carlo, A., 05/2008. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  76. Published

    Designing Digital Materials with Volumetric Gradients

    Richards, D. C., Abram, T. N. & Rennie, A. E. W., 27/04/2017. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  77. Published

    Phosphorus solubility changes following additions of bioenergy wastes to an agricultural soil: implications for crop availability and environmental mobility  

    Richards, S., Marshall, R., Lag Brotons, A., Semple, K. & Stutter, M., 1/11/2021, In: Geoderma. 401, 11 p., 115150.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  78. Published

    Bringing Multi-Domain Functions to Intelligent Systems through MEMS Technology Platforms – The INTEGRAMplus Access Service.

    Richardson, A., Pickering, C., McNie, M., Reeves, C., Schropfer, G., Knapp, H. & Bosshard, C., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic). 4, p. 38-40 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  79. Published

    Design-for-testability for mixed signal and analogue design.

    Richardson, A. M. D. & Lechner, A., 2000, Proceedings of 7th international conference on mixed design of integrated circuits and systems. Poland

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  80. Published

    Design for testability strategies for mixed signal and analogue designs: from layout to system.

    Richardson, A. M. D., Lechner, A. & Olbrich, T., 1998, Proceedings of the 5th IEEE international conference on electronics, circuits and systems. Lisbon, p. 425-433 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  81. Published

    Reliability indicators.

    Richardson, A. M. D. & Dorey, A. P., 1992, Third European symposium of reliability of electron devices, failure, physics and analysis (ESREF). Schabisch Gmund, p. 277-285 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  82. Published

    Supply current monitoring in cmos circuits for reliability prediction and test.

    Richardson, A. M. D. & Dorey, A. P., 1992, In: Quality and Reliability Engineering International. 8, 6, p. 543-548 6 p.

    Research output: Contribution to Journal/Magazine › Journal article

  83. Published

    System in Package Technology - Design for Manufacture Challenges.

    Richardson, A. M. D., Bailey, C., Dumas, N. & Yannou, J. M., 1/02/2007, In: Circuit World. 33, 1, p. 36-46 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  84. Published

    Sensor Testing Through Bias Superposition.

    Richardson, A. M. D., Bunyan, R., Mathias, H. & Nouet, P., 1/05/2007, In: Sensors and Actuators A: Physical. 136, 1, p. 441-455 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  85. Published

    A capacitance and optical method for the static and dynamic characterization of micro electro mechanical systems (MEMS) devices.

    Richardson, A. M. D., Ferraris, E., Fassi, I., De Masi, B. & Rosing, R., 1/09/2006, In: Microsystem Technologies. 12, 10-11, p. 1053-1061 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    Construction of Nonlinear Dynamic MEMS Component Models Using Cosserat Theory.

    Richardson, A., De Masi, B., Rosing, R. & Wang, C., 1/08/2004, In: Analog Integrated Circuits and Signal Processing. 40, 2, p. 117-130 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  87. Published

    INTEGRAMplus : a new European service project providing development platforms for integrated micro-nano technologies and products.

    Richardson, A. M. D., Pickering, C., McNie, M. & Reeves, C. L., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic).

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    MNT needs methodologies and software tools.

    Richardson, A. M. D., Solomon, P. & El-Fatatry, A., 2006, In: MST News (VDI/VDE Technologiezentrum Informationstechnic). 2, p. 16-35 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    Guest editorial.

    Richardson, A. M. D., Mir, S. & Cheng, T., 12/2006, In: Journal of Electronic Testing. 22, 4-6, p. 311

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    Editorial: Mixed signal & analogue IC test technology

    Richardson, A. & Dorey, T., 12/1996, In: IEE Proceedings - Circuits, Devices and Systems. 143, 6, p. 357-357 1 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  91. Published

    Fault-tolerant and self-testable architectures for zero failure electronics

    Richardson, A., Sharif, E. & Betts, W. R., 1997, AUTOMOTIVE ELECTRONICS - AUTOTECH'97. EDMUNDS: MECHANICAL ENGINEERING PUBL, p. 133-142 10 p. (IMechE seminar publication ; 1997-10).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  92. Published

    Design for Micro and Nano Manufacture; The "PATENT-DfMM Network of Excellence: Modelling and Simulation Cluster

    Richardson, A., Slattery, O. & Rencz, M., 1/04/2006, Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2006. EuroSime 2006. 7th International Conference on. p. 1 -5 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  93. Published

    Integrated Test Support for Micro- Electro-Mechanical-Systems (MEMS)

    Richardson, A., Vermeiren, W., Straube, B. & Olbrich, T., 19/09/1996, p. 273. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  94. Published

    The application of IDDX test strategies in analogue and mixed signal IC's

    Richardson, A., Bratt, A., Baturone, I. & HUERTAS, J. L., 22/06/1995. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  95. Published

    Defect oriented test development based on inductive fault analysis

    Richardson, A., Kerkhoff, H. G. & Harvey, R., 22/06/1995, p. 2-11. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  96. Published

    An Integrated Diagnostic Reconfiguration (IDR) design approach for fault tolerant mixed signal integrated systems

    Richardson, A., Sharif, E. & Dorey, A., 11/06/1998, p. 88-90. 3 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  97. Published

    Reconfiguration based built-in self-test for analogue front-end circuits

    Richardson, A., Lechner, A. & Hermes, B., 18/06/1999, p. 243-247. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  98. Published

    The application of neuMOS transistors to enhanced Built-in Self-Test (BIST) and product quality

    Richardson, A. & Nicholson, R., 18/06/1999, p. 257-261. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  99. Published

    Test support strategies for MEMS

    Richardson, A., Rosing, R., Peyton, A. & Dorey, A., 18/06/1999, p. 345-350. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  100. Published

    Reconfigurable circuits for fault tolerant systems: factors to consider

    Richardson, A., Jeffrey, C. & Lechner, A., 21/06/2002, p. 215-218. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

Previous 1...44 45 46 47 48 49 50 51 ...65 Next

Back to top