Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Published

    Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesizers

    Richardson, A., Tijou, J., Burbidge, M. & Vaid, V., 21/06/2002, p. 23-29. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  2. Published

    Testing high resolution SD ADC’s by using the noise transfer function

    Richardson, A. & De-Venuto, D., 26/05/2004. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  3. Published

    Test of A/D Converters

    Richardson, A. & Lechner, A., 2008, Test & Diagnostics of Analogue, Mixed Signal & RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 213-234 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  4. Published

    Phase Locked Loop Test Methodology

    Richardson, A. & Burbidge, M., 2008, Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 277-306 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  5. Published

    Delivering Bio-Mems & Microfluidic Education Around Accessible Technologies

    Richardson, A., Liu, H., Koltsov, D., Rosing, R., Ryan, T. & Wooton, R., 28/05/2008, Proceedings of the 8th European Workshop on Microelectronics Education. EDA Publishing, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  6. Published

    A Dependable Microelectronic Peptide Synthesizer Using Electrode Data

    Richardson, A., Kerkhoff, H. G., Zhang, X., Mailly, F., Nouet, P. & Liu, H., 2008, In: VLSI Design. 2008, n/a, 9 p., 437879.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. Published

    Microsystems for structural health monitoring.

    Richardson, A., Van Heeren, H. & Neylon, S., 10/2008, European Commission.

    Research output: Book/Report/ProceedingsCommissioned report

  8. Published

    The economics of multi-axis wave energy converters

    Richardson, D. & Aggidis, G., 9/06/2013.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  9. Published

    Development of a multi frequency impedance measurement system for use in MEMS flow cytometers

    Richardson, A. M. D., Cole, N. & Abdul‑Hafiz, A., 12/2017, In: Microsystem Technologies. 23, 12, p. 5527-5543 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    Multi-axis point absorber wave energy converters

    Richardson, D., 2019, Lancaster University. 179 p.

    Research output: ThesisDoctoral Thesis

  11. Published

    Self-Monitoring, Self-Healing Biomorphic Sensor Technology

    Richardson, A. & Cheneler, D., 3/10/2019, 2019 IEEE 25th International Symposium on On-Line Testing and Robust System Design, IOLTS 2019. Gizopoulos, D., Alexandrescu, D., Papavramidou, P. & Maniatakos, M. (eds.). IEEE, p. 121-124 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  12. Published

    An HF magnetospheric radar for EISCAT

    Rietveld, M. T., Honary, F., Robinson, T. R., Thide, B. & Stubbee, P., 1997, Proceedings of the 8th EISCAT international workshop. Leicester

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  13. Published

    Hf-pump-induced parametric instabilities in the auroral E-region

    Rietveld, M. T., Isham, B., Grydeland, T., Hoz, C. L., Leyser, T. B., Honary, F., Ueda, H., Kosch, M. & Hagfors, T., 2002, In: Advances in Space Research. 29, 9, p. 1363-1368 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    Fault diagnosis in multi-machine power systems using the Derivative-free nonlinear Kalman Filter

    Rigatos, G., Siano, P., Wira, P. & Ma, X., 13/06/2016, Environmental, Energy, and Structural Monitoring Systems (EESMS), 2016 IEEE Workshop on. IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  15. Published

    A systematic study of the effect of interrupted ageing conditions on the strength and toughness development of AA6061

    Risanti, D. D., Yin, M., del Castillo, P. E. J. R. D. & van der Zwaag, S., 15/10/2009, In: Materials Science and Engineering: A. 523, 1-2, p. 99-111 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  16. Published

    Strength-toughness optimisation scenarios through interrupted ageing in AA6061 and AA2024

    Risanti, D. D., Rivera-Díaz-del-Castillo, P. E. J. & Van Der Zwaag, S., 2008, Aluminum Alloys: Fabrication, Characterization and Applications - Proceedings of Symposia held during TMS 2008 Annual Meeting and Exhibition. p. 79-84 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  17. Published

    Observed characteristics of sudden commencement absorption.

    Ritchie, S. E. & Honary, F., 04/2009, In: Journal of Atmospheric and Solar-Terrestrial Physics. 71, 5, p. 609-617 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  18. Published

    Storm sudden commencement and its effect on high-latitude HF communication links

    Ritchie, S. E. & Honary, F., 25/06/2009, In: Space Weather. 7, S06005, p. 1-20 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    Observations on the variability and screening effect of sporadic-E

    Ritchie, S. E. & Honary, F., 08/2009, In: Journal of Atmospheric and Solar-Terrestrial Physics. 71, 12, p. 1353-1364 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Advances in ionospheric propagation modelling at high-latitudes

    Ritchie, S. E. & Honary, F., 28/04/2009, p. 32-38. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN Otherpeer-review

  21. Published

    Prediction of sudden commencement absorption

    Ritchie, S. E. & Honary, F., 04/2006, p. 113-116. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN Other

  22. Published

    Tailoring of Ostwald ripening behaviour in multicomponent Al alloys

    Rivera Diaz Del Castillo, P. E. J., Reischig, P. & Van Der Zwaag, S., 04/2005, In: Scripta Materialia. 52, 8, p. 705-708 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    A statistical mechanics theory of grain deformation and its prediction of dynamical recovery and recrystallization

    Rivera Díaz Del Castillo, P. E. J. & Van Der Zwaag, S., 2004, In: Materials Science Forum. 467-470, I, p. 87-92 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Statistical mechanics prediction of solid-solid transformations induced by plastic deformation

    Rivera Díaz Del Castillo, P. E. J., Huang, M. & Van Der Zwaag, S., 2005, Proceedings of an International Conference on Solid-Solid Phase Transformations in Inorganic Materials 2005. Howe, J. M., Laughlin, D. E., Lee, J. K., Dahmen, U. & Soffa, W. A. (eds.). Vol. 1. p. 621-628 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  25. Published

    Tailoring dynamic recrystallization in Ni- and Fe-base high temperature alloys

    Rivera-Diaz-del-Castillo, P. & Galindo-Nava, E., 2013, Recrystallization and Grain Growth V. Vol. 753. p. 427-430 4 p. (Materials Science Forum; vol. 753).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  26. Published

    Thermomechanical Processing Design of Nanoprecipitate Strengthened Alloys Employing Genetic Algorithms

    Rivera-Diaz-del-Castillo, P. E. J., de Jong, M. & Sluiter, M. H. F., 20/04/2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. John Wiley and Sons Inc., Vol. 2. p. 477-484 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  27. Published

    Heat treatment and composition optimization of nanoprecipitation hardened alloys

    Rivera-Diaz-Del-Castillo, P. E. J. & Xu, W., 11/04/2011, In: Materials and Manufacturing Processes. 26, 3, p. 375-381 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    Rolling contact fatigue in bearings: Phenomenology and modelling techniques

    Rivera-Díaz-del-Castillo, P. E. J., 2012, Bearing Steel Technologies, 9th Volume: Advances in Rolling Contact Fatigue Strength Testing and Related Substitute Technologies. ASTM International, Vol. 1548 STP. p. 355-381 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  29. Published

    On the origin of ultra-hardness in bearing steels: Two-step bainite transformation processes

    Rivera-Díaz-del-Castillo, P. E. J., 2012, Materials Science and Technology Conference and Exhibition 2012, MS and T 2012. Vol. 2. p. 1094-1101 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  30. Published

    On the origin of ultra-hardness in bearing steels: Two-step bainite transformation processes

    Rivera-Díaz-del-Castillo, P. E. J., 2012, AIST Steel Properties and Applications Conference Proceedings - Combined with MS and T'12, Materials Science and Technology 2012. p. 295-302 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  31. Published

    Genetic alloy design of ultra high strength stainless steels: From thermodynamics to quantum mechanics

    Rivera-Díaz-del-Castillo, P. E. J., Xu, W. & Van Der Zwaag, S., 2010, THERMEC 2009. 5 ed. Vol. 638-642. p. 3473-3478 6 p. (Materials Science Forum; vol. 638-642).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  32. Published

    Growth of needle and plate shaped particles: Theory for small supersaturations, maximum velocity hypothesis

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 25-29 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  33. Published

    Theory for growth of spherical precipitates with capillarity effects

    Rivera-Díaz-del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2001, In: Materials Science and Technology. 17, 1, p. 30-32 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    Understanding microstructural transitions occurring under rolling contact fatigue

    Rivera-Díaz-Del-Castillo, P. E. J., 2015, Bearing Steel Technologies: 10th Volume, Advances in Steel Technologies for Rolling Bearings. ASTM International, Vol. STP 1580. p. 550-563 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    Computational design of nanostructured steels employing irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J., Hayashi, K. & Galindo-Nava, E. I., 10/2013, In: Materials Science and Technology (United Kingdom). 29, 10, p. 1206-1211 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  36. Published

    Dislocation annihilation in plastic deformation: I. Multiscale irreversible thermodynamics

    Rivera-Díaz-Del-Castillo, P. E. J. & Huang, M., 04/2012, In: Acta Materialia. 60, 6-7, p. 2606-2614 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  37. Published

    Precipitate coarsening in multicomponent systems

    Rivera-Díaz-Del-Castillo, P. E. J., 07/2002, In: Scripta Materialia. 47, 2, p. 113-117 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    Theory for growth of needle-shaped particles in multicomponent systems

    Rivera-Díaz-Del-Castillo, P. E. J. & Bhadeshia, H. K. D. H., 2002, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 33, 4, p. 1075-1081 7 p., 209.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  39. Published

    Assuring microstructural homegeniety in dual phase and trip steels

    Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 11/2004, In: Steel Research International. 75, 11, p. 711-715 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  40. Published

    Assurring microstructural homogeniety in dual phase and trip steels

    Rivera-Díaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 2004, Multiscaling in Applied Science and Emerging Technology; Fundamentals and Applications in Mesomechanics: Proceedings of the Sixth International Conference for Mesomechanics. Sih, G. C., Kermanidis, T. B. & Pantelakis, S. G. (eds.). p. 261-265 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  41. Published

    A model for ferrite/pearlite band formation and prevention in steels

    Rivera-Díaz-Del-Castillo, P. E. J., Sietsma, J. & Van Der Zwaag, S., 02/2004, In: Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 35 A, 2, p. 425-433 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  42. Published

    Theory for diffusional transformation kinetics: Multicomponent and multiphase systems

    Rivera-Díaz-Del-Castillo, P. E. J., Reischig, P., Xu, W. & Van Der Zwaag, S., 11/2005, In: Scripta Materialia. 53, 9, p. 1089-1094 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  43. Published

    Strengthening mechanisms in high-entropy alloys: Perspectives for alloy design

    Rivera-Díaz-Del-Castillo, P. E. J. & Fu, H., 14/10/2018, In: Journal of Materials Research. 33, 19, p. 2970-2982 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Published

    Wave power resource dynamics for the period 1980-2021 in Atlantic Europe's Northwest seas

    Rizaev, I., Dorrel, R., Oikonomou, C., Tapoglou, E., Hall, C., Aggidis, G. & Parsons, D., 22/06/2023, Proceedings of the Thirty-Third (2023) International Ocean and Polar Engineering Conference ISOPE-2023. ISOPE, p. 644-649 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  45. Published

    You talk – but what does it type.

    Roberts, P. E., Joyce, M. J. & Philpott, C., 23/02/2004, In: Speech and Language Therapy in Practice. p. 16-19 4 p.

    Research output: Contribution to Journal/MagazineJournal article

  46. Published

    Speech recognition software for dysarthric speakers.

    Roberts, P. & Joyce, M. J., 2003, Proceedings of the 5th European CPLOL congress.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  47. Published

    Virtual workshops using Microsoft Teams

    Roberts, J. & Munday, D., 20/07/2022, 100 Ideas for Active Learning. Oprandi, P. & Betts, T. (eds.). University of Sussex Library, p. 865-872 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  48. Published

    Data-driven Process Parameter Optimisation for Laser Wire Metal Additive Manufacturing

    Roberts, M., Xia, M. & Kennedy, A., 10/10/2022, Proceedings of the 27th International Conference on Automation & Computing. IEEE, p. 1-6 6 p. 124

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  49. Published

    Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security

    Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  50. Published
  51. Published

    Other Voices

    Roberts, J., 1/07/2024, The Journal of the Institution of Engineering Designers, 51, 3, p. 36-37 2 p.

    Research output: Contribution to specialist publicationContribution to a Specialist Magazine - With ISSN

  52. Published
  53. Published

    Propolis citizen science project report

    Roberts, J., 1/04/2025, BBKA News, 107, 3, p. 11-13 3 p.

    Research output: Contribution to specialist publicationContribution to a Specialist Magazine - With ISSN

  54. Published

    State-dependent system identification for control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D., Taylor, C. J. & Lokuciewski, C., 2012, 16th IFAC Symposium on System Identification. Kinnaert, M. (ed.). Brussels: IFAC, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paper

  55. Published

    Low-level joint control of a robotic manipulator using state-dependent parameter models

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  56. Published

    State-dependent control of a hydraulically-actuated nuclear decommissioning robot

    Robertson, D. & Taylor, C. J., 2012. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  57. Published

    RF heating in a strong auroral electrojet

    Robinson, T. R., Bond, G., Eglitis, P., Honary, F. & Rietveld, M. T., 1998, In: Advances in Space Research. 21, 5, p. 689-692 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  58. Published

    A Resonance Broadening Kinetic Theory of the Modified-two-stream Instability: Implications for Radar Auroral Backscatter Experiments

    Robinson, T. R. & Honary, F., 1/02/1990, In: Journal of Geophysical Research. 95, A2, p. 1073-1085 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  59. Published

    Adiabatic and Isothermal Ion-acoustic Speeds of Stable Farley-Buneman Waves in the Auroral E Region

    Robinson, T. R. & Honary, F., 1993, In: Journal of Atmospheric and Terrestrial Physics. 55, 1, p. 65-77 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  60. Published

    First EISCAT observations of the modification of F-region electron temperatures during RF heating at harmonics of the electron gyro frequency

    Robinson, T. R., Honary, F., Stocker, A. J., Jones, T. B. & Stubbe, P., 3/01/1996, In: Journal of Atmospheric and Terrestrial Physics. 58, 1-4, p. 385-395 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  61. Published

    Factors influencing the heating of the auroral electrojet by high power radio waves

    Robinson, T. R., Honary, F., Stocker, A. & Jones, T. B., 1995, In: Advances in Space Research. 15, 12, p. 41-44 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  62. Published

    Design of a Reflectarray Fed by a Planar Leaky-Wave Antenna for 3U CubeSats

    Rodriguez Prado, D., Poveda-Garcia, M., Goussetis, G. & Wang, L., 4/11/2024, 2024 17th United Conference on Millemetre Waves and Terahertz Technologies (UCMMT). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  63. Published

    Efficient Analysis of Highly Resonant Transmitarray Element For Sub-THz 6G Communications

    Rodriguez Prado, D., Liu, X., Letizia, R., Paoloni, C. & Wang, L., 31/03/2025, In: IEEE Antennas and Wireless Propagation Letters. 24, 3, p. 771-775 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  64. Forthcoming

    Single-Feed Multi-Beam W-Band Reflectarray for Ultra-Capacity Fixed Wireless Access

    Rodriguez Prado, D., Liu, X., Paoloni, C., Letizia, R. & Wang, L., 12/12/2024, (Accepted/In press).

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  65. Published

    Foam formation in low expansion fire fighting equipment.

    Roger, L. E., Widden, M. B. & Osborne, M. J., 2000, Proceedings of the Eurofoam 2000 conference. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  66. Published

    Foam formation in low expansion fire fighting equipment

    Rogers, L., 2001, Lancaster University. 210 p.

    Research output: ThesisDoctoral Thesis

  67. Published

    A modified two temperature molecular dynamics (2T-MD) model for cascades

    Rojano, A., Hunt, R., Crocombette, J.-P. & Murphy, S. T., 22/05/2024, In: Journal of Physics: Condensed Matter. 36, 33, 335901.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  68. Published

    Polarization-induced Fano resonances using wire-grid metasurfaces for the THz region: Metamaterials, Metadevices, and Metasystems 2020

    Romain, X., Degl'Innocenti, R., Baida, F. I., Boyer, P., N., E. (Editor), M.A., N. (Editor), N.I., Z. (Editor) & (SPIE), T. S. O. P.-O. I. E., 20/08/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  69. Published

    Tunable Polarization-Induced Fano Resonances in Stacked Wire-Grid Metasurfaces

    Romain, X., Degl'Innocenti, R., Baida, F. I. & Boyer, P., 3/06/2021, In: Communications Physics. 4, 5 p., 115.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  70. Published

    Polyurethane membranes modified with isopropyl myristate as a potential candidate for encapsulating electronic implants: A study of biocompatibility and water permeability

    Roohpour, N., Wasikiewicz, J. M., Moshaverinia, A., Paul, D., Grahn, M. F., Rehman, I. U. & Vadgama, P., 2010, In: Polymers. 2, 3, p. 102-119 18 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  71. Published

    Isopropyl myristate-modified polyether-urethane coatings as protective barriers for implantable medical devices

    Roohpour, N., Wasikiewicz, J. M., Moshaverinia, A., Paul, D., Rehman, I. U. & Vadgama, P., 2009, In: Materials. 2, 3, p. 719-733 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  72. Published

    Synthesis and characterisation of enhanced barrier polyurethane for encapsulation of implantable medical devices

    Roohpour, N., Wasikiewicz, J. M., Paul, D., Vadgama, P. & Rehman, I. U., 2009, In: Journal of Materials Science: Materials in Medicine. 20, 9, p. 1803-1814 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  73. Published

    Accurate vehicular positioning using a DAB-GSM hybrid system

    Rooney, S., Chippendale, P., Choony, R., Roux, C. L. & Honary, B., 05/2000, Vehicular Technology Conference Proceedings, 2000. VTC 2000-Spring Tokyo. 2000 IEEE 51st. Tokyo, Japan: IEEE, p. 97-101 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  74. Published

    Modelling techniques for reliability prediction in MEMS technologies.

    Rosing, R. & Richardson, A. M. D., 2003, Proceedings of the Nanotech 2003 conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  75. Published

    Generation of component level fault models for MEMS.

    Rosing, R., Reichenbach, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of the 7th international mixed-signal testing workshop (IMSTW ’01). p. 40-45 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  76. Published

    Fault simulation and modelling of microelectromechanical systems.

    Rosing, R., Lechner, A., Richardson, A. M. D. & Dorey, A. P., 2000, In: IEE Journal on Computing and Control Engineering. 11, 5, p. 242-250 9 p.

    Research output: Contribution to Journal/MagazineJournal article

  77. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the design automation and test in Europe conference. Paris: IEEE, p. 476-483 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  78. Published

    A fault simulation methodology for MEMS.

    Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the IEE symposium on quality and automation (RESQUA 2000). Penang, Malaysia

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  79. Published

    Fault simulation for MEMS

    Rosing, R., Richardson, A., Dorey, A. & Peyton, A., 1/06/1999, Intelligent and Self-Validating Sensors (Ref. No. 1999/160), IEE Colloquium on. p. 7/1 -7/6

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  80. Published

    Generation of component level fault models for MEMS

    Rosing, R., Reichenbach, R. & Richardson, A., 2002, In: Microelectronics Journal. 33, 10, p. 861-868 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  81. Published

    Clock switching: a new design for current test (DcT) method for dynamic logic circuits

    Rosing, R., Richardson, A. M. D., Kerkhoff, A. & Acosta, A., 1998, IDDQ Testing, 1998. Proceedings. 1998 IEEE International Workshop on. IEEE, p. 20-25 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  82. Published

    Generation of MEMS component models using Cosserat symbolic simulations

    Rosing, R., Wang, C., Tucker, R., Richardson, A. & De Masi, B., 2002, SPIE Proceedings: design, test, integration, and packaging of MEMS/MOEMS 2002. Vol. 4755. p. 149-154 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  83. Published

    Vitamin D and peak bone mass in UK South Asian women

    Roy, D. K., Berry, J. L., Adams, J. E., Swarbrick, C. M., King, Y., Pye, S. R., Silman, A. J. & O', N. T. W., 2004, In: Osteoporosis International. 15, Supplement 2, p. S9 1 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  84. Published

    Performance optimization of a hybrid PV/T solar system using Soybean oil/MXene nanofluids as A new class of heat transfer fluids

    Rubbi, F., Habib, K., Saidur, R., Aslfattahi, N., Yahya, S. M. & Das, L., 15/09/2020, In: Solar Energy. 208, p. 124-138 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  85. Published

    State-of-the-art review on water-based nanofluids for low temperature solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Rahman, M. T., 15/09/2021, In: Solar Energy Materials and Solar Cells. 230, 40 p., 111220.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. Published

    A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application

    Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  87. Published

    MXene incorporated nanofluids for energy conversion performance augmentation of a concentrated photovoltaic/thermal solar collector

    Rubbi, F., Das, L., Habib, K., Saidur, R., Yahya, S. M. & Aslfattahi, N., 31/12/2022, In: International Journal of Energy Research. 46, 15, p. 24301-24321 21 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  88. Published

    High-pressure phase behaviour of binary (CO2 + nicotine) and ternary (CO2 + nicotine plus solanesol) mixtures

    Ruiz-Rodriguez, A., Najdanovic, V., Visak, Z. P., Bronze, M. D. R., Antunes, C. & da Ponte, M. N., 15/08/2009, In: Fluid Phase Equilibria. 282, 1, p. 58-64 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  89. Published

    High-pressure phase behaviour of nicotine / carbon dioxide system

    Ruiz-Rodríguez, A., Najdanovic-Visak, V. & Nunes da Ponte, M., 2008.

    Research output: Contribution to conference - Without ISBN/ISSN Abstract

  90. Published

    The monitoring of pile construction to assess integrity and load carrying capacity of CFA piles.

    Rust, M., Clayton, C., Mure, N., Scott, J., Seward, D. & Quayle, S., 2004, p. 1565-1569. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  91. Published

    Data-Driven Surrogate Modeling with Microstructure-Sensitivity of Viscoplastic Creep in Grade 91 Steel

    Ruybalid, A., Tallman, A., Wen, W., Matthews, C. & Capolungo, L., 31/12/2024, In: Integrating Materials and Manufacturing Innovation. 13, 4, p. 895-914 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  92. Published

    SpaciMS: spatial and temporal operando resolution of reactions within catalytic monoliths

    Sá, J., Fernandes, D. L. A., Aiouache, F., Goguet, A., Hardacre, C., Lundie, D., Naeem, W., Partridge, W. P. & Stere, C., 2010, In: Analyst. 135, 9, p. 2260-2272 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  93. Published

    Greener synthesis of dimethyl carbonate using a novel tin-zirconia/graphene nanocomposite catalyst

    Saada, R., Aboelazayem, O., SUELA, K., Heil, T., Morgan, D., Lampronti, G. & Saha, B., 15/06/2018, In: Applied Catalysis B: Environmental. 226, p. 451-462 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  94. Published

    Causes and consequences of thermal runaway incidents - Will they ever be avoided?

    Saada, R., Patel, D. & Saha, B., 30/09/2015, In: Process Safety and Environmental Protection. 97, p. 109-115 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  95. Published

    Greener synthesis of dimethyl carbonate using a novel ceria-zirconia oxide/graphene nanocomposite catalyst

    Saada, R., Kellici, S., Heil, T., Morgan, D. & Saha, B., 30/06/2015, In: Applied Catalysis B: Environmental. 168-169, p. 353-362 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    Graphene/fly ash geopolymeric composites as self-sensing structural materials

    Saafi, M., Tang, L., Fung, J., Rahman, M., Sillars, F., Liggat, J. & Zhou, X., 2014, In: Smart Materials and Structures. 23, 6, 10 p., 065006.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  97. Published

    Enhanced properties of graphene/fly ash geopolymeric composite cement

    Saafi, M., Tang, L., Fung, J., Rahman, M. & Liggat, J., 01/2015, In: Cement and Concrete Research. 67, p. 292-299 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  98. Published

    Hybrid graphene/geopolymeric cement as a superionic conductor for structural health monitoring applications

    Saafi, M. B. S., Piukovics, G. & Ye, J., 20/09/2016, In: Smart Materials and Structures. 25, 10, 11 p., 105018.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  99. Published

    Inherently multifunctional geopolymeric cementitious composite as electrical energy storage and self-sensing structural material

    Saafi, M. B. S., Gullane, A., Huang, B., Sadeghi, H., Ye, J. & Sadeghi, F., 1/10/2018, In: Composite Structures. 201, p. 766-778 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  100. Published

    Assessing the environmental performance of NADH regeneration methods: A cleaner process using recyclable Pt/Fe3O4 and hydrogen

    Saba, T., Burnett, J., Li, J., Wang, X., Anderson, J. A., Kechagiopoulos, P. N. & Wang, X., 1/01/2020, In: Catalysis Today. 339, p. 281–288 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Back to top