School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

6301 - 6400 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Type

Editorial
Published
Editorial: Rapid Design, Prototyping and Manufacturing
Bibb, R. (Guest editor) & Rennie, A. E. W. (Guest editor), 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Selected papers from the Twelfth International Conference on Combustion and Energy Utilisation (12th ICCEU)
Jiang, X. (Editor), Kraft, M. (Editor) & Yan, J. (Editor), 15/10/2015, In: Applied Energy. 156, p. 747–748 2 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Guest Editorial: The 36th MATADOR Conference 2010
Pinkerton, A. J., 2012, In: Materials and Manufacturing Processes. 27, 4, p. 363-363 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Special issue on interdisciplinary aspects of vehicle system dynamics integration
Cao, D., Rakheja, S. & Sandu, C., 11/2011, In: Mechanical Systems and Signal Processing. 25, 8, p. 3213-3215 3 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Challenges in oil and gas subsea production systems: Control, monitoring and reliability - an introduction
Theobald, M., Taylor, C. J. & Burnham, K. J., 07/2011, In: Measurement and Control. 44, 7, p. 206-207 2 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Special issue on advanced vehicle handling dynamics and control
Cao, D., Rakheja, S. & Yang, X., 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-3 3 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Rapid design, prototyping and manufacturing
Rennie, A., Aitchison, D. (Editor) & Jacobson, D. M., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 181-181 1 p.
Research output: Contribution to Journal/Magazine › Editorial
Published
Special Issue: Mixed-Technology Testing
Lubaszewski, M. (Editor), Richardson, A. (Editor) & Su, C. C. (Editor), 07/2009, In: Microelectronics Journal. 40, 7, p. 1041-1041 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Laser and electron beams - evolving tools for surface engineering
Pinkerton, A. J., 04/2009, In: Surface Engineering. 25, 3, p. 177-179 3 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Guest Editorial
Lubaszewski, M. (Editor), Richardson, A. (Editor) & Su, C. C. (Editor), 12/2007, In: Journal of Electronic Testing. 23, 6, p. 469-469 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Closure to “Buckling Analysis of Angle‐Ply Multilaminated Long Hollow Cylinders”
Ye, J. Q., 08/2000, In: Journal of Engineering Mechanics. 126, 8, p. 887-887 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Editorial: Mixed signal & analogue IC test technology
Richardson, A. & Dorey, T., 12/1996, In: IEE Proceedings - Circuits, Devices and Systems. 143, 6, p. 357-357 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Special issue
Published
Particle trajectories in a four rod crab cavity
Brett, D. R., Appleby, R. B., Burt, G. & Hall, B., 11/01/2014, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 734, Part A, p. 79-83 5 p.
Research output: Contribution to Journal/Magazine › Special issue › peer-review
Published
Off-road vehicle dynamics
Li, L. (Editor), Zhang, X. (Editor) & Cao, D. (Editor), 2014, In: International Journal of Vehicle Design. 64, 2-4, p. 121-371
Research output: Contribution to Journal/Magazine › Special issue › peer-review
Published
Interdisciplinary aspects of vehicle system dynamics integration
Cao, D., Rakheja, S. & Sandu, C., 08/2011, In: Mechanical Systems and Signal Processing. 25, 6, p. 1877-2038 162 p.
Research output: Contribution to Journal/Magazine › Special issue › peer-review
Published
Advanced vehicle handling dynamics and control
Cao, D. (Editor), Rakheja, S. (Editor) & Yang, X. (Editor), 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-366 366 p.
Research output: Contribution to Journal/Magazine › Special issue › peer-review
Published
Advanced Suspension Systems and Dynamics for Future Road Vehicles
Cao, D. (Editor) & Song, X. (Editor), 2011, In: Vehicle System Dynamics. 49, 1-2, p. 1-418 418 p.
Research output: Contribution to Journal/Magazine › Special issue › peer-review
Meeting abstract
Published
Post pancreatectomy acute pancreatitis and effect on chemotherapy: Long term analysis
Hassan, A., Rashid, S., Lambert, J., Fleet, B. & Subar, D., 16/05/2024, In: HPB. 26, Suppl. 1, p. S376-S377 2 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
OGC P44 Biospectrometry as a non invasive tool in the diagnosis of oesophageal cancer
Elniel, M., Maitra, I., Ur Rehman, I. & Daté, R., 18/11/2023, In: The British journal of surgery. 110, Supplement_8, znad348.242.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Monitoring of Technetium in Groundwater:Development of a Novel QCM Based Sensor
Papageorgiou, A. & Andrieux, F., 19/10/2021, In: ECS Meeting Abstracts. MA2021-02, 55, p. 1595-1595 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Monitoring of Technetium in Groundwater: Development of a Novel QCN Based Sensor
Papageorgiou, A. & Andrieux, F., 30/05/2021, In: ECS Meeting Abstracts. MA2021-01, 57, p. 1546-1546 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Quantifying Extracellular Matrix Changes in Osteoarthritic Human Cartilage and Subchondral Bone Using Raman Microspectroscopy
Che Ahmad Tantowi, N. A., Cheneler, D., McLauchlan, G. & Kerns, J., 1/03/2021, In: Orthopaedic Proceedings. 103-B, SUPP_2, p. 101 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract
Published
Raman Analysis of Breast Cancer: A Large Tissue Microarray Study
Pacheco, D. L., Shaaban, A., Baldwin, G., Titloye, A. & Rehman, I. U., 09/2018, In: The Journal of Pathology. 246, Suppl. 1, p. S13-S13 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Epidemiological analysis of hepatitis C in Pakistan and other Countries: a current update
Ikram, S., Ahmad, F., Rehman, I. U., Ahmad, J., Shah, F. H., Khattak, S. U., Hafeez, A. B., Maryam, A. & Gohar, M., 30/06/2018, In: JOURNAL OF VIRAL HEPATITIS. 25, Suppl. 2, p. 204-204 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Raman spectroscopic analysis of cervicovaginal fluid as a predictive tool for spontaneous preterm birth
Narice, B. F., Martinez, G. M. A., Amabebe, E., Rehman, I. U. & Anumba, D. O., 17/04/2018, In: BJOG: An International Journal of Obstetrics and Gynaecology. 125, p. 108-109 2 p., PP.071.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Analysing Cervicovaginal Fluid Using Raman Spectroscopy as a Predictive Tool for Preterm Birth.
Narice, B. F., Martnez, M. A., Amabebe, E., Pacheco, D. L., Rehman, I. U. & Anumba, D. O., 28/02/2018, In: REPRODUCTIVE SCIENCES. 25, Suppl. 1, p. 123A-123A 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES
Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
What difference does a form make? A re-audit of a palliative care handover form for Out of Hours GPs.
Callin, S., Gadoud, A., Leahy, H., Lambert, K. & Ward, J., 1/03/2010, In: Palliative Medicine. 24, 2, p. 241-2
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
I&EC 90-Hydrogenation of CO2-expanded liquid terpenes: Phase equilibrium-controlled kinetics
Bogel-Lukasik, E., Serbanovic, A., Bogel-Lukasik, R., Banet-Osuna, A., Najdanovic-Visak, V. & da Ponte, M. N., 19/08/2007, In: Abstracts of Papers of the American Chemical Society. 234, 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
ORTHOPAEDIC BIOPOLYMER WEAR SCREENING RIG VALIDATED AGAINST CLINICAL DATA
Joyce, T. J., Monk, D., Thompson, P., Chiu, P., Unsworth, A. & Green, S. M., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 377 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
OPTIMAL PROSTHESIS TEMPERATURE IN CEMENTED TOTAL HIP ARTHROPLASTY
Jafri, A., Green, S. M., McCaskie, A. W., Partington, P. F. & Muller, S. D., 1/10/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP III, p. 365 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
MATERIALS TESTING AND VOLUMETRIC ANALYSIS OF EXPLANTED ABG I CUP INSERTS
Chuter, G. S. J., Cloke, D. J., Green, S. M. & Partington, P. F., 1/05/2006, In: Journal of Bone and Joint Surgery, British Volume. 88-B, SUPP II, p. 246 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
THE WEAR OF ALUMINA-ON-ALUMINA TOTAL HIP PROSTHESES
Scholes, S. C., Green, S. M. & Unsworth, A., 1/04/2004, In: Journal of Bone and Joint Surgery, British Volume. 86-B, SUPP IV, p. 403 1 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
DOES THE CLINICAL ENVIRONMENT INFLUENCE THE PROPERTIES OF BONE CEMENT?
Burt, N., Green, S. M., Sandher, D. S. & Gregg, P. J., 1/01/2003, In: Journal of Bone and Joint Surgery, British Volume. 85-B, SUPP I, p. 13-14 2 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Working paper
Published
Sparking Change: Electricity consumption, carbon emissions and working time
Csala, D., 13/03/2020, 1 ed., Autonomy.
Research output: Working paper
Published
Fast estimate of the SAR using spline interpolation approach for parallel transmit B1 mapping in ultra-high field MRI
Letizia, R., Ye, J., Grover, P. & Shah, S., 2015.
Research output: Working paper
Published
Simulink implementation of a mean value engine model for an internal combustion engine. Technical report, Lancaster University, UK.
Titi, S., 2013, Lancaster: Lancaster University.
Research output: Working paper
Unpublished
I.C. air-fuel-ratio control using state-dependent parameter models and sliding mode control
Titi, S., 2013, (Unpublished).
Research output: Working paper
Unpublished
Analysis and verification of fuel exhaust emissions.
Ma, X., 2/12/2010, (Unpublished) 12 p.
Research output: Working paper
Unpublished
Performance evaluation of Zeolite Rankine cycle systems using scroll expander for combined heat and electricity generation.
Ma, X., 28/10/2010, (Unpublished) 9 p.
Research output: Working paper
Published
Digital approaches to field neutron spectrometry-NPL Report IR 23.
Akurugoda Gamage, K. A., Hawkes, N. & Taylor, G., 09/2010, National Physical Laboratory.
Research output: Working paper
Unpublished
The UK Business Support Simplification Programme: A Case Study for the North West Universities Association from Lancaster University : Invited paper for the UK consultation process for DBERR's initiative to streamline business support services
Lambert, C., Rennie, A. & Williams, D., 2008, (Unpublished) 10 p.
Research output: Working paper
Published
ISOLUS Technical Options Study - Independent Peer Review Report.
Joyce, M. J., 2008, MOD.
Research output: Working paper
Unpublished
Feasibility study for tomographic walk-through metal detector.
Ma, X., Peyton, A. J. & Lionheart, W. R. B., 01/2007, (Unpublished) Unpublished, 12 p.
Research output: Working paper
Published
Effect and tolerances of phase and amplitude errors in the ILC crab cavity.
Burt, G., Goudket, P., Dexter, A. & Kalinin, A., 2006.
Research output: Working paper
Published
Coupler design considerations for the ILC crab cavity.
Burt, G., Beard, C., Dexter, A., Goudket, P., McIntosh, P. & Wooldridge, E., 2006.
Research output: Working paper
Published
Initial background search on piezoelectric weight measurement used in urimeter application.
Koltsov, D. & Richardson, A., 2006.
Research output: Working paper
Unpublished
Report of quality of service think tank, UKERNA QoS think tank report
Edwards, C., Butler, J., Chown, T., Cooper, C., Couzens, J., Jeffreys, P., Price, D., Samani, R., Sharp, J. & Tasker, R., 07/2001, (Unpublished).
Research output: Working paper
Published
The organisation of Primary Care for mental health services in East Lancashire and Morecambe Bay Health Authorities.
Davies, J., Mort, M. M. & Stead, V., 2000, Lancaster: University of Lancaster / NHS Executive North West.
Research output: Working paper
Book
Published
Mobile Robots: Navigation, Control and Sensing
Monk, S. (Editor) & Cheneler, D. (Editor), 24/03/2025, Multidisciplinary Digital Publishing Institute (MDPI). 604 p.
Research output: Book/Report/Proceedings › Book
Published
Porous Nanocomposites for Electromagnetic Interference Shielding
Thomas, S. (Editor), Paoloni, C. (Editor) & Pai, A. (Editor), 23/02/2024, Woodhead Publishing Limited. 526 p. (Woodhead Publishing Series in Electronic and Optical Materials)
Research output: Book/Report/Proceedings › Book
Published
Fundamentals of Wave Energy Conversions: The Dynamics of the wave-structure interaction and wave energy optimisation
Sheng, W. & Aggidis, G., 18/09/2022, Eliva Press. 433 p.
Research output: Book/Report/Proceedings › Book
Published
Radiation Sensing: Design and Deployment of Sensors and Detectors
Gamage, K. A. A. (Editor) & Taylor, C. J. (Editor), 31/08/2021, Multidisciplinary Digital Publishing Institute (MDPI). 101 p.
Research output: Book/Report/Proceedings › Book
Published
Microwave and RF Vacuum Electronic Power Sources
Carter, R. G., 04/2018, Cambridge: Cambridge University Press. 807 p.
Research output: Book/Report/Proceedings › Book
Published
Environment, planning and land use
Kivell, P., Roberts, P. & Walker, G. P., 1/01/2018, Taylor and Francis. 219 p.
Research output: Book/Report/Proceedings › Book
Published
The analysis of nuclear materials and their environments
Degueldre, C., 10/2017, Cham: Springer. 314 p.
Research output: Book/Report/Proceedings › Book
Published
Health, safety and biohazards in construction: How safe is the work place? Risks and Hazards in our environment
Amaechi, C. V., 20/11/2016, 1 ed. Germany: LAP LAMBERT Academic Publishing . 141 p.
Research output: Book/Report/Proceedings › Book
Published
Structural and Stress Analysis: Theories, Tutorial and Examples
Ye, J., 2016, 2nd ed. CRC Press: CRC Press.
Research output: Book/Report/Proceedings › Book
Published
Toughening mechanisms in composite materials
Qin, Q. (Editor) & Ye, J. (Editor), 06/2015, Elsevier. 416 p. (Woodhead Publishing Series in Composites Science and Engineering)
Research output: Book/Report/Proceedings › Book
Published
LHC and CLIC LLRF final reports
Burt, G., Dexter, A., Woolley, B., Tahir, I., Syratchev, I. & Wuensch, W., 25/10/2013, Switzerland: CERN. 82 p.
Research output: Book/Report/Proceedings › Book
Published
True digital control: statistical modelling and non–minimal state space design
Taylor, C. J., Young, P. & Chotai, A., 08/2013, Chichester: John Wiley & Sons, Ltd. 360 p.
Research output: Book/Report/Proceedings › Book
Published
Heat - degrees of comfort?
Kemp, R., 01/2012, London: Royal Academy of Engineering. 56 p.
Research output: Book/Report/Proceedings › Book
Published
Vibrational spectroscopy for tissue analysis: Vibrational Spectroscopy for Tissue Analysis
Rehman, I. U., Movasaghi, Z. & Rehman, S., 2012, 1st ed. CRC Press. 303 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on
Rennie, A. (Editor) & Bocking, C. E. (Editor), 06/2011, CRDM Ltd. 203 p.
Research output: Book/Report/Proceedings › Book
Published
Electric vehicles: charged with potential
Kemp, R., Blythe, P., Brace, C., James, P., Parry-Jones, R., Thielens, D., Thomas, M., Wenham, R. & Urry, J., 06/2010, London: Royal Academy of Engineering. 52 p.
Research output: Book/Report/Proceedings › Book
Published
Generating the future: UK energy systems fit for 2050
Kemp, R., Ion, S., Cumpsty, N., Fisk, D., Jenkins, N., Kelly, M., Loughhead, J. & Roberts, J., 03/2010, London: Royal Academy of Engineering. 30 p.
Research output: Book/Report/Proceedings › Book
Published
Nuclear Lessons Learned.
Joyce, M. J., Garnsey, R. & Nickson, I., 2010, Royal Academy of Engineering. 77 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Eleventh National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2010, CRDM Ltd. 222 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid Design, Prototyping and Manufacturing: Proceedings of the Tenth National Conference on
Rennie, A. (Editor), Bocking, C. E. (Editor) & Jacobson, D. M. (Editor), 2009, MJA Print. 123 p.
Research output: Book/Report/Proceedings › Book
Published
Smart sensors for buried utility location and performance monitoring
Chapman, D., Cheneler, D., Metje, N., Thomas, A. & Ward, M., 2009, London: UK Water Industry Research. 44 p.
Research output: Book/Report/Proceedings › Book
Published
Numerical Techniques for Direct and Large-Eddy Simulations
Jiang, X. & Lai, C.-H., 2009, Boca Raton: CRC Press/Taylor & Francis, Ltd. 264 p.
Research output: Book/Report/Proceedings › Book
Published
Structural and Stress Analysis: theories, Tutorial and Examples
Ye, J., 2008, UK: Spon Press (Taylor and Francis). 217 p.
Research output: Book/Report/Proceedings › Book
Published
Data mining for degradation modelling
Lin, H., Kong, L. & Hsu, H.-Y., 2008, Saarbrücken: VDM Verlag Dr. Müller. 124 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacturing: Proceedings of the Ninth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2008, MJA Print. 173 p.
Research output: Book/Report/Proceedings › Book
Published
S60 Programming: A Tutorial Guide.
Coulton, P., Edwards, R. & Clemson, H., 02/2007, Wiley and Symbian Press. 328 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Eighth National Conference on
Jacobson, D. M. (Editor), Bocking, C. E. (Editor) & Rennie, A. (Editor), 2007, MJA Print. 140 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: proceedings of the seventh national conference on
Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.
Research output: Book/Report/Proceedings › Book
Published
Fluid Machinery for Wave and Tidal Energy – State of the Art and New Developments.
Aggidis, G. A. & IMechE Event Publications, 2. (Editor), 10/2005, London: Institution of Mechanical Engineers.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Sixth National Conference on
Rennie, A. (Editor), Jacobson, D. M. (Editor) & Bocking, C. E. (Editor), 2005, X-CD Technologies Inc. 129 p.
Research output: Book/Report/Proceedings › Book
Published
Rapid design, prototyping and manufacture: Proceedings of the Fifth National Conference on
Jacobson, D. M. (Editor), Rennie, A. (Editor) & Bocking, C. E. (Editor), 2004, Professional Engineering Publishing. 111 p.
Research output: Book/Report/Proceedings › Book
Published
Hydropower developments : new projects, rehabilitation, and power recovery / organized by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE).
Aggidis, G. A., 2004, London: Professional Engineering Publishing. 141 p. (IMechE event publications)
Research output: Book/Report/Proceedings › Book
Published
Second international symposium centrifugal pumps : the state of the art and new developments / organized by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE).
Aggidis, G. A., 2004, London: Professional Engineering Publishing. 187 p. (IMechE event publications)
Research output: Book/Report/Proceedings › Book
Published
Second International Symposium on Advanced Materials for Fluid Machinery / organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE)
Aggidis, G. A., 2004, London: Published by Professional Engineering Publishing. 145 p. (IMechE conference transactions)
Research output: Book/Report/Proceedings › Book
Published
Advances of CFD in Fluid Machinery Design /organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE).
Aggidis, G. A., 18/11/2003, London: IMechE Event Publications.
Research output: Book/Report/Proceedings › Book
Published
Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports
Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.
Research output: Book/Report/Proceedings › Book
Published
Modelling and analysis of interconnects for deep submicron systems-on-chip.
Pamunuwa, D. B., 2003, Stockholm: Royal Institute of Technology.
Research output: Book/Report/Proceedings › Book
Published
Linear control systems
Montazeri, A., 2003, Tehran: Sanjesh Aval.
Research output: Book/Report/Proceedings › Book
Published
Laminated composite plates and shells: 3D modelling
Ye, J., 2003, London: Springer-Verlag. 273 p.
Research output: Book/Report/Proceedings › Book
Published
Hydropower Developments – New Projects & Rehabilitation / organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE).
Aggidis, G. A., 21/11/2002, London: IMechE Event Publications.
Research output: Book/Report/Proceedings › Book
Published
Rapid Prototyping, Tooling and Manufacturing: Proc. Third National Conference on
Rennie, A. E. W. (Editor), Jacobson, D. M. (Editor) & Bocking, C. (Editor), 2002, Professional Engineering Publishing. 173 p.
Research output: Book/Report/Proceedings › Book
Published
Hydropower developments : new projects and rehabilitation / organized by the Fluid Machinery Committee of the Power Industries Division of the Institution of Mechanical Engineers (IMechE).
Aggidis, G. A., 30/11/2000, London: Professional Engineering Pub. for the Institution of Mechanical Engineers. 99 p. (IMechE seminar publication)
Research output: Book/Report/Proceedings › Book
Published
Centrifugal pumps : the state of the art and new opportunities / Institution of Mechanical Engineers (Great Britain). Fluid Machinery Committee.
Aggidis, G. A., 18/05/2000, London: Institution of Mechanical Engineers.
Research output: Book/Report/Proceedings › Book
Published
Computer aided conceptual design '97 : proceedings of the 1997 Lancaster International Workshop on Engineering Design CACD'97.
Bradshaw, A. & Counsell, J. M., 1997, Lancaster: Lancaster University: Centre for the Study of Environmental Change. 144 p.
Research output: Book/Report/Proceedings › Book
Commissioned report
Published
one6G white paper, 6G technology overview
Paoloni, C., 2023, one6G.
Research output: Book/Report/Proceedings › Commissioned report
Published
Bioenergy Technologies for a Net Zero Transition: Outcomes of UK-India Bioenergy Research Scoping
Thornley, P., Rathi, B., Borah, A. J., Saha, B., Adams, J., Hiloidhari, M., Blanchard, R., Dinsdale, R., Nagarajan, S., Kumar, S., Vaidyanathan, S., Sharma, S., Sahota, S. & Masakapalli, S. K., 31/05/2022, Aston University, UK: Supergen Bioenergy Hub. 59 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
The sustainability of liquid biofuels
Azapagic, A., Hall, J., Heaton, R., Kemp, R. J., Ocone, R., Shah, N., Smith, P., Swithenbank, J., Chilvers, A. & Jeswani, H., 1/07/2017, UK: Royal Academy of Engineering. 92 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
No renderer
Published
Scope for reduction in transport CO2 emissions by modal shift
Kemp, R. J., 05/2016, UK: Energy Technologies Institute. 28 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Transforming the electricity system: how other sectors have met the challenge of whole-system integration
Kemp, R. J., 2/10/2014, London: Institution of Engineering and Technology. 78 p.
Research output: Book/Report/Proceedings › Commissioned report
Published
Wind energy: implications of the large-scale deployment on the GB electricity system
Walker, A., Trewby, J., Kemp, R. J., Green, R., Gross, R., Sterling, M., Harrison, G. & Smith, R., 04/2014, London: Royal Academy of Engineering. 67 p.
Research output: Book/Report/Proceedings › Commissioned report

Previous 1...60 61 62 63 64 65 66 Next

Research

School of Engineering

Quick Links

Connect With Us