Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. 2014
  2. Published

    Mathematical modelling in chemical engineering

    Cheneler, D., 29/04/2014, In: Applied Rheology. 24, 4

    Research output: Contribution to Journal/MagazineBook/Film/Article reviewpeer-review

  3. Published

    Hydrogen-enriched non-premixed jet flames: analysis of the flame surface, flame normal, flame index and Wobbe index

    Ranga Dinesh, K. K. J., Jiang, X. & van Oijen, J. A., 15/04/2014, In: International Journal of Hydrogen Energy. 39, 12, p. 6753-6763 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    The influence of silicon in tempered martensite: Understanding the microstructure-properties relationship in 0.5-0.6 wt.% C steels

    Kim, B., Boucard, E., Sourmail, T., San Martín, D., Gey, N. & Rivera-Díaz-Del-Castillo, P. E. J., 15/04/2014, In: Acta Materialia. 68, p. 169-178 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. Published

    Controlled modification of optical and structural properties of glass with embedded silver nanoparticles by nanosecond pulsed laser irradiation

    Fleming, L. A. H., Tang, G., Zolotovskaya, S. & Abdolvand, A., 14/04/2014, In: Optical Materials Express. 4, 5, p. 969-975 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  6. Published

    Time-domain characterization of short-pulse networks and antennas using signal space method

    Li, S., Yin, X., Wang, L., Zhao, H., Liu, L. & Zhang, M., 1/04/2014, In: IEEE Transactions on Antennas and Propagation. 62, 4, p. 1862 - 1871

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. Published

    0.22 THz TWT based on the double corrugated waveguide

    Paoloni, C. & Mineo, M., 04/2014, 15th IEEE International Vacuum Electronic Conference. Piscataway, N.J.: IEEE, p. 227-228 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  8. Published

    Numerical analysis of slender elliptical concrete filled columns under axial compression

    Dai, X. H., Lam, D., Jamaluddin, N. & Ye, J., 04/2014, In: Thin-Walled Structures. 77, p. 26-35 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  9. Published

    Organo-erbium systems for optical amplification at telecommunications wavelengths

    Ye, H. Q., Li, Z., Peng, Y., Wang, C. C., Li, T. Y., Zheng, Y. X., Sapelkin, A., Adamopoulos, G., Hernandez, I., Wyatt, P. B. & Gillin, W. P., 04/2014, In: Nature Materials. 13, 4, p. 382-386 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform

    Lupeanu, M., Rennie, A., Rosu, M.-M. & Moagar-Poladian, G., 04/2014, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  11. Published

    Thermostastitical modelling of deformation twinning in HCP metals

    Galindo-Nava, E. I. & Rivera-Díaz-Del-Castillo, P. E. J., 04/2014, In: International Journal of Plasticity. 55, p. 25-42 18 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    THz backward wave oscillator based on PhC-wall corrugated waveguide

    Letizia, R., Mineo, M. & Paoloni, C., 04/2014, 15th IEEE International Vacuum Electronic Conference. Monterey, Calif.: IEEE, p. 65-66 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  13. Published

    Wind energy: implications of the large-scale deployment on the GB electricity system

    Walker, A., Trewby, J., Kemp, R. J., Green, R., Gross, R., Sterling, M., Harrison, G. & Smith, R., 04/2014, London: Royal Academy of Engineering. 67 p.

    Research output: Book/Report/ProceedingsCommissioned report

  14. Published

    A single rapid route for the synthesis of reduced graphene oxide with antibacterial activities

    Kellici, S., Acord, J., Ball, J., Reehal, H. S., Morgan, D. & Saha, B., 31/03/2014, In: RSC Advances. 4, 29, p. 14858-14861 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Unpublished

    Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

    Lupeanu, M., Rennie, A. & Neagu, C., 31/03/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  16. Published

    Low-bias terahertz amplitude modulator based on split-ring resonators and graphene

    Degl'innocenti, R., Jessop, D. S., Shah, Y. D., Sibik, J., Zeitler, J. A., Kidambi, P. R., Hofmann, S., Beere, H. E. & Ritchie, D. A., 25/03/2014, In: ACS Nano. 8, 3, p. 2548-2554 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    Green process engineering as the key to future processes

    Patel, D., Kellici, S. & Saha, B., 19/03/2014, In: Processes. 2, 1, p. 311-332 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  18. Published

    Graphene-based optical modulator realized in metamaterial split-ring resonators operating in the THz frequency range

    Degl'Innocenti, R., Jessop, D. S., Shah, Y. D., Sibik, J., Zeitler, A., Kidambi, P. R., Hofmann, S., Beere, H. E. & Ritchie, D. A., 7/03/2014, In: Proceedings of SPIE. 8985, 89851E.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    Enhanced Heterogeneous Catalytic Conversion of Furfuryl Alcohol into Butyl Levulinate

    Demma Cara, P., Ciriminna, R., Raveendran, S., Rothenberg, G. & Pagliaro, M., 1/03/2014, In: ChemSusChem. 7, 3, p. 835-840 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Micromachined thick mesh filters for millimeter-wave and terahertz applications

    Wang, Y., Yang, B., Tian, Y., Donnan, R. S. & Lancaster, M. J., 03/2014, In: IEEE Transactions on Terahertz Science and Technology. 4, 2, p. 247-253 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  21. Published

    Numerical analysis of composite structure with in-plane isotropic negative Poisson’s ratio: effects of materials properties and geometry features of inclusions

    Hou, X., Hu, H. & Silberschmidt, V., 03/2014, In: Composites Part B: Engineering. 58, p. 152–159 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  22. Published

    Solubility of high-value compounds in environmentally friendly solvents-liquid poly(ethylene glycol) and ionic liquids: experimental study and thermodynamic analysis

    Calado, M. S., Branco, A. S. H., Najdanovic-Visak, V. & Visak, Z. P., 03/2014, In: Journal of Chemical Thermodynamics. 70, p. 154-159 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    The hydrolysis of hydroxamic acid complexants in the presence of non-oxidizing metal ions 3: ferric ions at elevated temperatures

    Andrieux, F., Boxall, C., Steele, H. & Taylor, R., 03/2014, In: Journal of Solution Chemistry. 43, 3, p. 608-622 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Point defects and non-stoichiometry in Li2TiO3

    Murphy, S. T. & Hine, N. D. M., 25/02/2014, In: Chemistry of Materials. 26, 4, p. 1629-1638 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  25. Published

    Hidden-sector photon and axion searches using photonic band gap structures

    Seviour, R., Bailey, I., Woollett, N. & Williams, P., 12/02/2014, In: Journal of Physics G: Nuclear and Particle Physics. 41, 3, 10 p., 035005.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  26. Published

    CASCADE: a cavity based dark matter experiment

    Kalliokoski, M., Bailey, I., Woollett, N., Burt, G., Dexter, A., Chattopadhyay, S., Goudket, P., Moss, A., Pattalwar, S., Thakker, T., Williams, P. & Dainton, J., 02/2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  27. Published

    Demand side management in smart grid: a review and proposals for future direction

    Gelazanskas, L. & Gamage, K., 02/2014, In: Sustainable Cities and Society. 11, p. 22-30 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    Electrodeposition of indium bumps for ultrafine pitch interconnection

    Tian, Y., Liu, C., Hutt, D. & Stevens, B., 02/2014, In: Journal of Electronic Materials. 43, 2, p. 594-603 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published

    Grain size evolution during discontinuous dynamic recrystallization

    Galindo-Nava, E. I. & Rivera-Díaz-Del-Castillo, P. E. J., 02/2014, In: Scripta Materialia. 72-73, p. 1-4 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  30. Published

    Isosteric enthalpies for hydrogen adsorbed on nanoporous materials at high pressures

    Bimbo, N., Sharpe, J. E., Ting, V. P., Noguera-Diaz, A. & Mays, T. J., 02/2014, In: Adsorption-Journal of the International Adsorption Society. 20, 2, p. 373-384 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  31. Published

    Parametric study of development of inconel-steel functionally graded materials by laser direct metal deposition

    Shah, K., ul Haq, I., Khan, A., Shah, S. A., Khan, M. & Pinkerton, A., 02/2014, In: Materials and Design. 54, p. 531-538 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    Design approach for the development of a cryomodule for compact crab cavities for Hi-Lumi LHC

    Pattalwar, S., Jones, T., Templeton, N., Goudket, P., McIntosh, P. A., Wheelhouse, A., Burt, G. C., Hall, B., Wright, L. & Peterson, T., 29/01/2014, In: AIP Conference Proceedings. 1573, 1, p. 795-802 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  33. Published

    Critical review of directional neutron survey meters

    Balmer, M., Gamage, K. & Taylor, G., 21/01/2014, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 735, p. 7-11 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    Evaluation of performance and operation viability of non-uniform potential solid oxide fuel cell fueled by reformed methane

    Piroonlerkgul, P., Kiatkittipong, W., Wongsakulphasatch, S., Aiouache, F. & Assabumrungrat, S., 15/01/2014, In: Journal of Power Sources. 246, p. 719–728 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  35. Published

    Damping of unwanted modes in SRF deflecting/crabbing cavities

    Burt, G. & Wang, H., 11/01/2014, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 734, Part A, p. 65-71 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  36. Published

    Particle trajectories in a four rod crab cavity

    Brett, D. R., Appleby, R. B., Burt, G. & Hall, B., 11/01/2014, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 734, Part A, p. 79-83 5 p.

    Research output: Contribution to Journal/MagazineSpecial issuepeer-review

  37. Published

    Modelling and design of stress-induced martensite formation in metastable β Ti alloys

    Neelakantan, S., Galindo-Nava, E. I., San Martin, D., Chao, J. & Rivera-Díaz-del-Castillo, P. E. J., 10/01/2014, In: Materials Science and Engineering: A. 590, p. 140-146 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    Modelling, Design and Robust Control of a Remotely Operated Underwater Vehicle

    García-Valdovinos, L. G., Salgado-Jiménez, T., Bandala-Sánchez, M., Nava-Balanzar, L., Hernández-Alvarado, R. & Cruz-Ledesma, J. A., 9/01/2014, In: International Journal of Advanced Robotic Systems. 11, 1, 1.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  39. Published

    Selectivity in the gas-phase hydrogenation of 4-nitrobenzaldehyde over supported Au catalysts

    Perret, N., Wang, X., Onfroy, T., Calers, C. & Keane, M. A., 1/01/2014, In: Journal of Catalysis. 309, p. 333-342 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  40. Published

    System study using injection phase locked magnetron as an alternative source for superconducting radio frequency accelerator

    Wang, H., Plawski, T., Rimmer, R., Dexter, A., Tahir, I., Neubauer, M. & Dudas, A., 1/01/2014, IEEE International Vacuum Electronics Conference, IVEC 2014. IEEE Computer Society Press, p. 443-444 2 p. 6857680. (IEEE International Vacuum Electronics Conference, IVEC 2014).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  41. Published

    A thermostatistical theory for solid solution effects in the hot deformation of alloys: An application to low-alloy steels

    Galindo-Nava, E. I., Perlade, A. & Rivera-Díaz-Del-Castillo, P. E. J., 01/2014, In: Modelling and Simulation in Materials Science and Engineering. 22, 1, 015009.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  42. Published

    Aldol-condensation of furfural by activated dolomite catalyst

    O’Neill, R., Vanoye, L., De Bellefon, C. & Aiouache, F., 01/2014, In: Applied Catalysis B: Environmental. 144, p. 46-56 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  43. Published

    An investigation into a suitable scintillator for localising neutron capture within a detector

    Balmer, M., Gamage, K. & Taylor, G., 01/2014, In: Journal of Instrumentation. 9, 1, P01007.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Published

    Erratum to: A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study

    Hou, X., Hu, H. & Silberschmidt, V., 01/2014, In: Journal of Materials Science. 49, 1, p. 461 1 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    Fabrication of multilayered SU8 structure for terahertz waveguide with ultralow transmission loss

    Tian, Y., Shang, X. & Lancaster, M. J., 01/2014, In: Journal of Micro/Nanolithography, MEMS, and MOEMS. 13, 1, 6 p., 013002.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  46. Published

    The business model for the functional rapid manufacturing supply chain

    Hasan, S., Rennie, A. & Hasan, J., 01/2014, In: Studia Commercialia Bratislavensia. 6, 24, p. 536-552 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  47. Published

    346 GHz BWO for fusion plasma diagnostics

    Popovic, B., Barchfeld, R., Tang, X., Zhang, F., Yue, L., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  48. Published

    346 GHz source for plasma diagnostic applications

    Barchfeld, R., Popovic, B., Tang, X., Yue, L., Zhang, F., Mineo, M., Letizia, R., Paoloni, C., Domier, C. W. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  49. Published

    A micromachined dual-band orthomode transducer

    Leal-Sevillano, C. A., Tian, Y., Lancaster, M. J., Ruiz-Cruz, J. A., Montejo-Garai, J. R. & Rebollar, J. M., 2014, In: IEEE Transactions on Microwave Theory and Techniques. 62, 1, p. 55-63 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    A Monte Carlo study of the effect of coded-aperture material and thickness on neutron imaging

    Hayes, S. & Gamage, K., 2014, In: Radiation Protection Dosimetry. 161, 1-4, p. 265-268 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  51. Published

    A three-dimensional model of an articulated frame-steer vehicle for coupled ride and handling dynamic analyses

    Pazooki, A., Rakheja, S. & Cao, D., 2014, In: International Journal of Vehicle Performance. 1, 3-4, p. 264-297 34 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  52. Published

    An examination of catalyst deactivation in p-chloronitrobenzene hydrogenation over supported gold

    Cardenas-Lizana, F., Wang, X., Lamey, D., Li, M., Keane, M. A. & Kiwi-Minsker, L., 2014, In: Chemical Engineering Journal. 255, p. 695-704 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  53. Published

    An experimental investigation of the failure of pultruded GFRP single-lap two-bolt connections in tension’

    Turvey, G., 2014, Proceedings of the International Conference, FRP Bridges 2014.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  54. Published

    An investigation on the performance of adaptive IIR filters for active noise control in one-dimensional systems (invited paper)

    Montazeri, A. & Behrouzfar, J., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  55. Published

    Analysis of nitrides- and TCOs-based plasmonic waveguides for slow-wave and negative index sub-wavelength propagation

    Letizia, R. & Pinto, D., 2014, In: Journal of Lightwave Technology. 32, 8, p. 1578-1584 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  56. Published

    Auxetic oesophageal stents: Structure and mechanical properties

    Ali, M. N., Busfield, J. J. C. & Rehman, I. U., 2014, In: Journal of Materials Science: Materials in Medicine. 25, 2, p. 527-553 27 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  57. Published

    Azimuthally and radially polarized light in conical diffraction

    Grant, S. D., Zolotovskaya, S., Gillespie, W. A., Kalkandjiev, T. K. & Abdolvand, A., 2014, In: Optics Letters. 39, 7, p. 1988-1991 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  58. Published

    Boosting CO2 Conversion through Phase Behaviour Manipulation at High Pressures

    Najdanovic, V., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  59. Published

    Compressible Reynolds-Averaged Navier-Stokes analysis of wind turbine turbulent flows using a Fully-Coupled Low-Speed preconditioned multigrid solver

    Campobasso, S., Yan, M., Drofelnik, J., Piskopakis, A. & Caboni, M., 2014, ASME Turbo Expo 2014: turbine technical conference and exposition: oil and gas applications; organic rankine cycle power systems; supercritical CO2 power cycles; wind energy. The American Society of Mechanical Engineers, Vol. 3B. 15 p. GT2014-25562

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  60. Published

    Computational design of model Re/Ru bearing Ni-base superalloys

    Vamsi, K. V., Goswami, K. N., Vinay, K. S., Verma, S. K., Balamuralikrishnan, R., Das, N., Banerjee, D. & Karthikeyan, S., 2014, In: MATEC Web of Conferences. 14, 1 p., 17007.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  61. Published

    Condition monitoring of rotating machines using vibration and bearing temperature measurements

    Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 2014, Advances in Condition Monitoring of Machinery in Non-stationary Operations: Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013). Dalpiaz, G., Rubini, R., D'Elia, G., Cocconcelli, M., Chaari, F., Zimroz, R. & Bartelmus, W. (eds.). Berlin: Springer Verlag, p. 159-169 11 p. (Lecture Notes in Mechanical Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  62. Published

    Control of nonlinear biological systems by non–minimal state variable feedback

    Taylor, C. J. & Aerts, J.-M., 2014, In: Statistics in Biosciences. 6, 2, p. 290-313 24 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  63. Published

    Control strategy for balancing wind power using hydro power and flow batteries

    Baranauskas, A., Gelazanskas, L., Azubalis, M. & Gamage, K., 2014, Energy Conference (ENERGYCON), 2014 IEEE International. Piscataway, N.J.: IEEE, p. 352-357 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  64. Published

    Development of a dewaxing protocol for tissue-engineered models of the oral mucosa used for Raman spectroscopic analysis

    Mian, S. A., Colley, H. E., Thornhill, M. H. & Rehman, I. U., 2014, In: APPLIED SPECTROSCOPY REVIEWS. 49, 8, p. 614-617 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  65. Published

    Development of a directional neutron survey meter

    Balmer, M., Gamage, K. & Taylor, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Speech

  66. Published

    Digital fast neutron radiography of rebar in concrete

    Mitton, K., Jones, A. R. & Joyce, M., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  67. Published

    Digital fast neutron radiography of steel reinforcing bar in concrete

    Mitton, K., Jones, A. & Joyce, M. J., 2014, In: Journal of Instrumentation. 9, 11 p., C12045.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  68. Published

    Discovery of new materials and heat treatments: Accelerated Metallurgy and the case of ferrous and magnesium alloys

    Toda-Caraballo, I., Galindo-Nava, E. I. & Rivera-Díaz-del-Castillo, P. E. J., 2014, THERMEC 2013. TRANS TECH PUBLICATIONS LTD, BRANDRAIN 6, CH-8707 ZURICH-UETIKON, SWITZERLAND, Vol. 783-786. p. 2188-2193 6 p. (Materials Science Forum; vol. 783-786).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  69. Published

    Electromechanical model of human atrial tissue using the discrete element method

    Brocklehurst, P., Zhang, H., Yang, D. & Ye, J., 2014, 11th World Congress on Computational Mechanics (WCCMXI).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  70. Published

    Electrospun polyurethane/hydroxyapatite bioactive scaffolds for bone tissue engineering: The role of solvent and hydroxyapatite particles

    Tetteh, G., Khan, A. S., Delaine-Smith, R. M., Reilly, G. C. & Rehman, I. U., 2014, In: Journal of the Mechanical Behavior of Biomedical Materials. 39, p. 95-110 16 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  71. Published

    Enhanced production of benzyl alcohol in the gas phase continuous hydrogenation of benzaldehyde over Au/Al2O3

    Li, M., Wang, X., Perret, N. & Keane, M. A., 2014, In: Catalysis Communications. 46, p. 187-191 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  72. Published

    Experimental evaluation of mechanical properties of tin composite (tin, rice husk and silicon carbide) for sustainable production tooling

    Hasib, H., Taufik, R. S., Mohd, N. F. A., Yahaya, S. H., Mohamad, A. K., Abdullah, Z., Ariff, H. & Hambali, R. H., 2014, In: Journal of Advanced Manufacturing Technology. 8, 2

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  73. Published

    Graphene/fly ash geopolymeric composites as self-sensing structural materials

    Saafi, M., Tang, L., Fung, J., Rahman, M., Sillars, F., Liggat, J. & Zhou, X., 2014, In: Smart Materials and Structures. 23, 6, 10 p., 065006.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  74. Published

    Harnessing the selective catalytic action of supported gold in hydrogenation applications

    Wang, X., Li, M. & Keane, M. A., 2014, Heterogeneous Gold Catalysts and Catalysis. Ma, Z. & Dai, S. (eds.). Royal Society of Chemistry (Great Britain), p. 424-461 38 p. (RSC Catalysis Series).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  75. Published

    High power THz vacuum electron devices for space applications

    Paoloni, C., Yue, L., Tang, X., Zhang, F., Popovic, B., Himes, L., Barchfeld, R., Gamzina, D., Letizia, R., Mineo, M. & Luhmann Jr., N. C., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  76. Published

    Hybrid power-train for port crane energy recovery

    Zhao, N., Schofield, N., Niu, W., Suntharalingam, P. & Zhang, Y., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  77. Published

    Influence of processing parameters and solid concentration on microstructural properties of gel-casted porous hydroxyapatite

    Asif, A., Nazir, R., Riaz, T., Ashraf, N., Zahid, S., Shahid, R., Ur-Rehman, A., Chaudhry, A. A. & Ur Rehman, I., 2014, In: Journal of Porous Materials. 21, 1, p. 31-37 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  78. Published

    InSb grating for Smith-Purcell THz radiation

    Sharples, E. & Letizia, R., 2014. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  79. Published

    Kineto-dynamic directional response analysis of an articulated frame steer vehicle

    Pazooki, A., Rakheja, S. & Cao, D., 2014, In: International Journal of Vehicle Design. 65, 1, p. 1-30 30 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  80. Published

    Low sheet resistivity, high transparency SnOx-based transparent conductive oxides for their applications in OLEDs

    Afouxenidis, D., Bin Esro, M., Vourlias, G. & Adamopoulos, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  81. Published

    Micro–climate control in a grow–cell: system development and overview

    Tsitsimpelis, I. & Taylor, C. J., 2014, International Federation of Automatic Control 19th Triennial World Congress. Cape Town, South Africa, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  82. Published

    Modeling of deformation behavior and texture evolution in magnesium alloy using the intermediate φ-model

    Li, D. S., Ahzi, S., M'Guil, S., Wen, W., Lavender, C. & Khaleel, M. A., 2014, In: International Journal of Plasticity. 52, p. 77-94 18 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  83. Published

    Nonredundant Raman imaging using optical eigenmodes

    Kosmeier, S., Zolotovskaya, S. A., De Luca, A. C., Riches, A., Herrington, C. S., Dholakia, K. & Mazilu, M., 2014, In: Optica. 1, 4, p. 257-263 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  84. Published

    Numerical analyses of the solubility trapping of CO2 storage in geological formations

    Meng, Q. & Jiang, X., 2014, In: Applied Energy. 130, p. 581-591 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  85. Published

    Numerical simulation of the mechanical response during strain path change: Application to Zn alloys

    Borodachenkova, M., Wen, W., Barlat, F., Pereira, A. & Grácio, J., 2014, In: Procedia Engineering. 81, p. 1300-1305 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. Published

    Ode to a Grecian replica: on simplifying accurate copies of fragile antiquities

    Glausiusz, J. & Kaufman, J., 2014, 2 p. Washington DC USA : Phi Beta Kappa Society.

    Research output: Other contribution

  87. Published

    Off-road vehicle dynamics

    Li, L. (Editor), Zhang, X. (Editor) & Cao, D. (Editor), 2014, In: International Journal of Vehicle Design. 64, 2-4, p. 121-371

    Research output: Contribution to Journal/MagazineSpecial issuepeer-review

  88. Published

    On the cutting edge of freeze-drying processes

    Capozzi, L., Barresi, A. A., Fissore, D., Pisano, R., Oddone, I., Colucci, D., Mussini, P. & Demichela, M., 2014

    Research output: Book/Report/ProceedingsProceedings

  89. Published

    Performance of sodium chloride versus commercial ionic liquid as salting-out media for the separation of nicotine from its aqueous solutions

    M. Lopes, J., V. M. Nunes, A., Nunes da Ponte, M., Visak, Z. P. & Najdanovic-Visak, V., 2014, In: Industrial and Engineering Chemistry Research. 53, 23, p. 9883-9888 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  90. Published

    Performance of time-critical smart grid applications in narrow band power line communication

    Tsado, Y., Lund, D. & Gamage, K., 2014, p. 407.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paper

  91. Published

    Phase locked magnetrons for accelerators

    Dexter, A. C., 2014, LINAC14: Proceedings of the 27th International Linear Accelerator Conference. CERN, p. 751-755 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  92. Published

    Phase-sensitive FMCW radar system for high-precision antarctic ice shelf profile monitoring

    Brennan, P. V., Lok, L. B., Nicholls, K. & Corr, H., 2014, In: IET Radar Sonar and Navigation. 8, 7, p. 776 - 786 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  93. Published

    Pipe diffusion at dislocations in UO2

    Murphy, S., Jay, E. & Grimes, R., 2014, In: Journal of Nuclear Materials. 447, p. 143-149 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  94. Published

    Preparation and characterization of bioactive composites and fibers for dental applications

    Qidwai, M., Sheraz, M. A., Ahmed, S., Alkhuraif, A. A. & Ur Rehman, I., 2014, In: Dental Materials. 30, 10, p. e253-e263 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  95. Published

    Preparation and characterization of multiactive electrospun fibers: Poly-ε-carpolactone fibers loaded with hydroxyapatite and selected NSAIDs

    Karavasili, C., Bouropoulos, N., Kontopoulou, I., Smith, A., Van Der Merwe, S. M., Rehman, I. U. R., Ahmad, Z. & Fatouros, D. G., 2014, In: Journal of Biomedical Materials Research Part A. 102, 8, p. 2583-2589 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    Removal Cu(II) and Ni(II) by natural and synthetic hydroxyapatites: a comparative study

    Frnane, F., Boudia, S. & Aiouache, F., 2014, In: Desalination and Water Treatment. 52, 13-15, p. 2856-2862 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  97. Published

    Resilient wireless communication networking for smart grid BAN

    Tsado, Y., Lund, D. & Gamage, K., 2014, IEEE International Energy Conference (ENERGYCON-2014). Piscataway, N.J.: IEEE, p. 846-851 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  98. Published

    Review and state of the art of regenerative liquid ring pumps

    Karlsen-Davies, N.-H. & Aggidis, G., 2014, 12th European Fluid Machinery Congress: Caledonian Hotel, Edinburgh, Scotland, 6-7 October 2014. Amsterdam: Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  99. Published

    Sector-shaped fast organic liquid scintillation detectors based neutron coincidence counter

    Gamage, K., Joyce, M. & Cave, F., 2014, In: Applied Radiation and Isotopes. 92, p. 1-5

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  100. Published

    Single- and double-lap bolted joints in pultruded composite plate

    Turvey, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  101. Published

    Solution processed aluminium titanate dielectrics for their applications in high mobility ZnO based thin film transistors

    Afouxenidis, D., Bin Esro, M., Vourlias, G. & Adamopoulos, G., 2014.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

Back to top