Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

251 - 300 out of 6,177Page size: 50
RSS feed of this list
  1. 2023
  2. Published

    Graphene and its tailoring as emerging 2D nanomaterials in efficient CO2 absorption: A state-of-the-art interpretative review

    Azni Farhana Mazri, N., Arifutzzaman, A., Kheireddine Aroua, M., Ekhlasur Rahman, M. & Ali Mazari, S., 15/08/2023, In: Alexandria Engineering Journal. 77, p. 479-502 24 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    Two-Stage Conversion of Used Cooking Oil to Biodiesel Using Ion Exchange Resins as Catalysts

    Mohammed, M., Abidin, S. Z. & Saha, B., 14/08/2023, In: Catalysts. 13, 8, p. 1-15 15 p., 1209.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Modelling of Amino Acid Fermentations and Stabilization of Anaerobic Digestates by Extracting Ammonium Bicarbonate

    Moure Abelenda, A., Aggidis, G. & Aiouache, F., 12/08/2023, In: Fermentation. 9, 8, 750.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Contactless 3D surface characterization of additive manufactured metallic components using terahertz time-domain spectroscopy

    Lu, Y., Zhu, H., Zaman, A. M., Rennie, A. E. W., Lin, H., Tian, Y. & Degl’Innocenti, R., 9/08/2023, In: Optical Materials Express. 13, 9, 13 p., 2513.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Continuous Manipulation and Characterization of Colloidal Beads and Liposomes via Diffusiophoresis in Single- and Double-Junction Microchannels

    Chakra, A., Singh, N., Vladisavljević, G. T., Nadal, F., Cottin-Bizonne, C., Pirat, C. & Bolognesi, G., 8/08/2023, In: ACS Nano. 17, 15, p. 14644-14657 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Development of the self-modulation instability of a relativistic proton bunch in plasma

    Verra, L., Wyler, S., Nechaeva, T., Pucek, J., Bencini, V., Bergamaschi, M., Ranc, L., Zevi Della Porta, G., Gschwendtner, E., Muggli, P., Agnello, R., Ahdida, C. C., Amoedo, C., Andrebe, Y., Apsimon, O., Apsimon, R., Arnesano, J. M., Blanchard, P., Burrows, P. N., Buttenschön, B., & 67 othersCaldwell, A., Chung, M., Cooke, D. A., Davut, C., Demeter, G., Dexter, A. C., Doebert, S., Elverson, F. A., Farmer, J., Fasoli, A., Fonseca, R., Furno, I., Gorn, A., Granados, E., Granetzny, M., Graubner, T., Grulke, O., Guran, E., Henderson, J., Kedves, M. Á., Kim, S-Y., Kraus, F., Krupa, M., Lefevre, T., Liang, L., Liu, S., Lopes, N., Lotov, K., Calderon, M. M., Mazzoni, S., Moon, K., Morales Guzmán, P. I., Moreira, M., Pakuza, C., Pannell, F., Pardons, A., Pepitone, K., Poimendidou, E., Pukhov, A., Ramjiawan, R. L., Rey, S., Rossel, R., Saberi, H., Schmitz, O., Senes, E., Silva, F., Silva, L., Spear, B., Stollberg, C., Sublet, A., Swain, C., Topaloudis, A., Torrado, N., Tuev, P., Turner, M., Velotti, F., Verzilov, V., Vieira, J., Weidl, M., Welsch, C., Wendt, M., Wing, M., Wolfenden, J., Woolley, B., Xia, G., Yarygova, V. & Zepp, M., 8/08/2023, In: Physics of Plasmas. 30, 8, 10 p., 083104.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. E-pub ahead of print

    Determination of carcinoembryonic antigen (CEA) by surface plasmon resonance-enhanced total internal reflection ellipsometry (SPRe-TIRE)

    Erkal-Aytemur, A., Şahin, S., Üstündağ, Z., Mülazımoğlu, İ. E. & Caglayan, M. O., 7/08/2023, (E-pub ahead of print) In: Instrumentation Science and Technology.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Dehydration analysis of poly-ethylene glycol hydrogels with terahertz imaging

    Baines, D., Bassu, G., Wright, K., Douglas, T., Degl'Innocenti, R., Laurati, M. & Lin, H., 3/08/2023, Technical Digest Series: Optica Sensing Congress 2023 (AIS, FTS, HISE, Sensors, ES). Optica Publishing Group, paper JW2A.3

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  10. E-pub ahead of print

    Resilient Event-Triggered Terminal Sliding Mode Control Design for a Robot Manipulator

    Saeedi, M., Zarei, J., Saif, M., Shanahan, D. & Montazeri, A., 3/08/2023, (E-pub ahead of print) In: IEEE Transactions on Automation Science and Engineering. p. 1-12 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Water Pressure Optimisation for Leakage Management Using Q Learning

    Negm, A., Ma, X. & Aggidis, G., 2/08/2023, Proceedings - 2023 IEEE Conference on Artificial Intelligence, CAI 2023. IEEE, p. 270-271 2 p. (2023 IEEE Conference on Artificial Intelligence (CAI)).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  12. Published

    A review of anion exchange membranes prepared via Friedel-Crafts reaction for fuel cell and water electrolysis

    Feng, Z., Gupta, G. & Mamlouk, M., 1/08/2023, In: International Journal of Hydrogen Energy. 48, 66, p. 25830-25858 29 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  13. Published

    Numerical and Experimental Analysis of the Cold Flow Physics of a Non Pre-mixed Industrial Gas Burner

    Ortolani, A., Yeadon, J., Ruane, B., Paul, M. & Campobasso, M. S., 1/08/2023, In: Journal of Fluids Engineering. 145, 8, 16 p., 081202.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Quantifying the effects of gap on the molten pool and porosity formation in laser butt welding

    Guo, L., Wang, H., Liu, H., Huang, Y., Wei, Q., Leung, C. L. A., Wu, Y. & Wang, H., 1/08/2023, In: International Journal of Heat and Mass Transfer. 209, 124143.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Derivation and characterization of secondary zinc oxide from rubber glove manufacturing wastewater via adsorption-desorption-precipitation route

    Pang, C. Y., Issabayeva, G., Pang, Y. L., Wong, M. C. & Aroua, M. K., 31/07/2023, In: Process Safety and Environmental Protection. 175, p. 178-189 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis

    Celik, H. K., Akinci, I., Erkan, M. & Rennie, A., 31/07/2023, In: Journal of Food Process Engineering. 46, 11, 14 p., e14424.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Environmental life cycle assessment of biomass conversion using hydrothermal technology: A review

    Hussin, F., Hazani, N. N., Khalil, M. & Aroua, M. K., 31/07/2023, In: Fuel Processing Technology. 246, 107747.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Repeated impact performance of stainless steel-lightweight high ductility cement composite beams

    Huang, Z., Zhao, X., Zhang, W. & Ye, J., 31/07/2023, In: Thin-Walled Structures. 188, 14 p., 110791.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security

    Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

  20. Published

    Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles

    Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

  21. Published

    Robust fabrication of ultra-soft tunable PDMS microcapsules as a biomimetic model for red blood cells

    Chen, Q., Singh, N., Schirrmann, K., Zhou, Q., Chernyavsky, I. & Juel, A., 28/07/2023, In: Soft Matter. 19, 28, p. 5249-5261 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. Published

    Simulating Aperture Coupling of OAM Waves Through an Infinite PEC Plane Using EFIE-MoM—Part I: Validation and Numerical Accuracy

    Wulff, M., Zhang, T., Wang, L., Brüns, H-D. & Schuster, C., 27/07/2023, In: IEEE Transactions on Electromagnetic Compatibility. 65, 5, p. 1389-1399

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Simulating Aperture Coupling of OAM Waves Through an Infinite PEC Plane Using EFIE-MoM—Part II: Application and Interpretation

    Wulff, M., Wang, L., Brüns, H-D. & Schuster, C., 21/07/2023, In: IEEE Transactions on Electromagnetic Compatibility. p. 1400-1409

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    A Comprehensive Review of Distributed MPPT for Grid-Tied PV Systems at the Sub-Module Level

    Alharbi, Y., Darwish, A. & Ma, X., 19/07/2023, In: Energies. 16, 14, p. 5468 23 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Choice and impact of frequency increment in direct digital synthesiser (DDS)‐based linear FMCW radar

    Brennan, P. V. & Lok, L. B., 19/07/2023, In: IET Radar Sonar and Navigation. 17, 10, p. 1507-1523

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Unpublished

    The development of an axial flux generator, hand crankable up to 200 W.

    Anjum, S., 19/07/2023, (Unpublished) Lancaster University. 98 p.

    Research output: Thesis › Master's Thesis

  27. Published

    Thermodynamic Insights into the Oxidation Mechanisms of CrMnFeCoNi High-Entropy Alloy Using In Situ X-ray Diffraction

    Arshad, M., Bano, S., Amer, M., Janik, V., Hayat, Q., Huang, Y., Guan, D. & Bai, M., 17/07/2023, In: Materials. 16, 14, 5042.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    A novel paradigm of flatness prediction and optimization for strip tandem cold rolling by cloud-edge collaboration

    Zhao, J., Li, J., Yang, Q., Wang, X., Ding, X., Peng, G., Shao, J. & Gu, Z., 16/07/2023, In: Journal of Materials Processing Technology. 316, 10 p., 117947.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Multivariate optimisation of butylene carbonate synthesis via CO2 utilisation

    Onyenkeadi, V. N., Aboelazayem, O. & Saha, B., 16/07/2023, p. 1100. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  30. Published

    A Review on Modular Converter Topologies Based on WBG Semiconductor Devices in Wind Energy Conversion Systems

    Athwer, A. & Darwish, A., 12/07/2023, In: Energies. 16, 14, 5324.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Degradation of QPPO-based anion polymer electrolyte membrane at neutral pH

    Feng, Z., Gupta, G. & Mamlouk, M., 5/07/2023, In: RSC Advances. 13, 29, p. 20235-20242 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Understanding Solid-State Photochemical Energy Storage in Polymers with Azobenzene Side Groups

    Wallace, C., Griffiths, K., Dale, B. L., Roberts, S., Parsons, J., Griffin, J. M. & Görtz, V., 5/07/2023, In: ACS applied materials & interfaces. 15, 26, p. 31787-31794 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Multi-scale Modelling for Materials Design in Additive Manufacturing

    Wang, W., 4/07/2023, Lancaster University. 268 p.

    Research output: Thesis › Doctoral Thesis

  34. Published

    Rapid imaging and product screening with low-cost line-field Fourier domain optical coherence tomography

    Zhang, Z., Yang, X., Zhao, Z., Zeng, F., Ye, S., Baldock, S., Lin, H., Hardy, J., Zheng, Y. & Shen, Y., 4/07/2023, In: Scientific Reports. 13, 10809.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    A dynamic model for the planetary bearings in a double planetary gear set

    Liu, J., Li, X. & Xia, M., 1/07/2023, In: Mechanical Systems and Signal Processing. 194, 23 p., 110257.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Ultra-broadband shielding of cellulose nanofiber commingled biocarbon functional constructs: A paradigm shift towards sustainable terahertz absorbers

    Pai, A. R., Lu, Y., Joseph, S., Santhosh, N. M., Degl'Innocenti, R., Lin, H., Letizia, R., Paoloni, C. & Thomas, S., 1/07/2023, In: Chemical Engineering Journal. 467, 143213.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    A comparative study of melting behavior of phase change material with direct fluid contact and container inclination

    Khademi, A., Mehrjardi, S. A. A., Said, Z., Saidur, R., Ushak, S. & Chamkha, A. J., 30/06/2023, In: Energy Nexus. 10, 16 p., 100196.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    Adaptive Event-Triggered Control for Nonlinear Systems With Asymmetric State Constraints: A Prescribed-Time Approach

    Wang, Z., Lam, H-K., Guo, Y., Xiao, B., Li, Y., Su, X., Yeatman, E. & Burdet, E., 30/06/2023, In: IEEE Transactions on Automatic Control. 68, 6, p. 3625-3632 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Configuration of Coupling Methanol Steam Reforming over Cu-Based Catalyst in a Synthetic Palladium Membrane for One-Step High Purity Hydrogen Production

    Wang, C., Weng, J., Liao, M., Luo, Q., Luo, X., Tian, Z., Shu, R., Chen, Y. & Du, Y., 30/06/2023, In: Journal of the Energy Institute. 108, 101245.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Cross-Domain Augmentation Diagnosis: An Adversarial Domain-Augmented Generalization Method for Fault Diagnosis under Unseen Working Conditions

    Li, Q., Chen, L., Kong, L., Wang, D., Xia, M. & Shen, C., 30/06/2023, In: Reliability Engineering and System Safety. 234, 13 p., 109171.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Guest Editorial Special Issue on Vacuum Electronic Devices, From Mega to Nano: Beyond One Century of Vacuum Electronics

    Paoloni, C., 30/06/2023, In: IEEE Transactions on Electron Devices. 70, 6, p. 2639-2642 4 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  42. Published

    Non-Aqueous Solvent Mixtures for CO2 Capture: Choline Hydroxide-Based Deep Eutectic Solvents Absorbent Performance at Various Temperatures and Pressures

    Kassim, M. A., Sulaiman, N. A., Yusoff, R. & Aroua, M. K., 30/06/2023, In: Sustainability. 15, 12, 9191.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Optimisation of greener alkene epoxidation via response surface methodology for effective separation of epoxides from the reaction mixture

    Bhuiyan, M. M. R. & Saha, B., 28/06/2023, p. 8. 1 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review

  44. Published

    Fabrication of G-band Double Corrugated Waveguide by Precision Cutting

    Paoloni, C., Socuellamos, J., Basu, R., Narasimhan, P. & Letizia, R., 27/06/2023, 2023 24th International Vacuum Electronics Conference (IVEC). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  45. Published

    An Agreement Analysis on the Perception of Property Stakeholders for the Acceptability of Smart Buildings in the Nigerian Built Environment

    Alohan, E. O., Oyetunji, A. K., Amaechi, C. V., Dike, E. C. & Chima, P., 26/06/2023, In: Buildings. 13, 7, 1620.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    A Method of Obtaining Biological Inspiration to Improve the Performance for TALOS Wave Energy Converter

    Zhang, H., Sheng, W. & Aggidis, G., 22/06/2023, ISOPE 2023. ISOPE, p. 621-627 7 p. 472

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    A Review of the Levelized Cost of Wave Energy Based on a Techno-Economic Model

    Guo, C., Sheng, W., De Silva, D. & Aggidis, G., 22/06/2023, ISOPE 2023. ISOPE, p. 663-669 7 p. 471

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  48. Published

    An Initial Study on Power Capture Performance Analysis of TALOS Based on Power Take-Off System Parameters

    Yavuz, H., Sheng, W. & Aggidis, G., 22/06/2023, ISOPE 2023. ISOPE, p. 590-596 7 p. 241

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  49. Published

    Hydrodynamic comparisons of TALOS Wave energy converter using panel methods

    Sheng, W. & Aggidis, G., 22/06/2023, ISOPE 2023. ISOPE, p. 597-604 8 p. 247

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  50. Published

    Operating of TALOS wave energy converter in different wave climates

    Oikonomou, C., Sheng, W., Korres, G. & Aggidis, G., 22/06/2023, ISOPE 2023. ISOPE, p. 650-656 7 p. 499

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  51. Published

    The Impact of Control Structure and Constraints on the Performance of a Wave Energy Converter with a Hydraulic PTO System

    Hall, C., Wu, Y., Sheng, W. & Aggidis, G., 22/06/2023, ISOPE-2023. ISOPE, p. 628-635 8 p. 456

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 12 3 4 5 6 7 8 9 ...124 Next

Back to top