Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

451 - 500 out of 6,158Page size: 50
RSS feed of this list
Sort by: Type
  1. Journal article
  2. Published

    Electrodeposition of nickel–iron on stainless steel as an efficient electrocatalyst coating for the oxygen evolution reaction in alkaline conditions

    Wang, Y., Williamson, N., Dawson, R. & Bimbo, N., 31/05/2023, In: Journal of Applied Electrochemistry. 53, 5, p. 877-892 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  3. Published

    A systematic review of machine learning approaches in carbon capture applications

    Hussin, F., Md Rahim, S. A. N., Hatta, N. S. M., Aroua, M. K. & Mazari, S. A., 31/05/2023, In: Journal of CO2 Utilization. 71, 16 p., 102474.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  4. Published

    Edge Solution for Real-time Motor Fault Diagnosis Based on Efficient Convolutional Neural Network

    An, K., Lu, J., Zhu, Q., Wang, X., De Silva, C. W., Xia, M. & Lu, S., 31/05/2023, In: IEEE Transactions on Instrumentation and Measurement. 72, p. 1-12 12 p., 3516912.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    Fabrication, mechanical properties, and multifunctionalities of particle reinforced foams: A review

    Cao, S., Ma, N., Zhang, Y., Bo, R. & Lu, Y., 31/05/2023, In: Thin-Walled Structures. 186, 22 p., 110678.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    POSS@TiCl4 nanoparticles: A minimalism styled Ziegler-Natta catalytic system

    Li, W., Dong, C., Wang, X., Wang, J. & Yang, Y., 31/05/2023, In: Journal of Catalysis. 421, p. 384-392 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Graphene oxide nano-layers functionalized/reduced by L-Citrulline/Pectin bio-molecules for epoxy nanocomposite coating mechanical properties reinforcement

    Shahmoradi, A. R., Bejandi, M. S., Rasanani, E. H., Javidparvar, A. A. & Ramezanzadeh, B., 31/05/2023, In: Progress in Organic Coatings. 178

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Adapted business model canvas template and primary market research for project-based learning on management of slurry

    Moure Abelenda, A., Aiouache, F. & Moreno-Mediavilla, D., 31/05/2023, In: Environmental Technology and Innovation. 30, 16 p., 103106.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Probabilistic analysis of wind turbine performance degradation due to blade erosion accounting for uncertainty of damage geometry

    Campobasso, S., Castorrini, A., Ortolani, A. & Minisci, E., 31/05/2023, In: Renewable and Sustainable Energy Reviews. 178, 16 p., 113254.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Vision-based particle filtering for quad-copter attitude estimation using multirate delayed measurements

    Sadeghzadeh-Nokhodberiz, N., Iranshahi, M. & Montazeri, A., 30/05/2023, In: Frontiers in Robotics and AI. 10, 1090174.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Recent Advances in Metal Powder-Based Additive Manufacturing

    Wu, H., Ren, Y., Tian, Y. & Caballero, A. O., 26/05/2023, In: Materials. 16, 11, 3975.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Additive manufacturing enabled synergetic strengthening of bimodal reinforcing particles for aluminum matrix composites

    Ma, S., Shang, Z., Shang, A., Zhang, P., Tang, C., Huang, Y., Leung, C. L. A., Lee, P. D., Zhang, X. & Wang, X., 25/05/2023, In: Additive Manufacturing. 70, 103543.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    A Novel Feature-Based Manufacturability Assessment System for Evaluating Selective Laser Melting and Subtractive Manufacturing Injection Moulding Tool Inserts

    Kashouty, M. F. E., Rennie, A. & Ghazy, M., 22/05/2023, In: Designs. 7, 3, 18 p., 68.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Joining Technologies for Aluminium Castings—A Review

    Li, D., Slater, C., Cai, H., Hou, X., Li, Y. & Wang, Q., 19/05/2023, In: Coatings. 13, 5, 958.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. E-pub ahead of print

    Tidal range power generation: case studies combining the Lancaster 0-D generation and cost models

    Vandercruyssen, D., Baker, S., Howard, D. & Aggidis, G., 16/05/2023, (E-pub ahead of print) In: Proceedings of the ICE - Energy. p. 1-25 25 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  16. Published

    Experimental and numerical analysis of additively manufactured foamed sandwich beams

    Yousefi Kanani, A. & Kennedy, A., 15/05/2023, In: Composite Structures. 312, 9 p., 116866.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    MXene/MnO2 nanocomposite coated superior salt-rejecting biodegradable luffa sponge for efficient solar steam generation

    Saleque, A. M., Ma, S., Thakur, A. K., Saidur, R., Han, T. K., Hossain, M. I., Qarony, W., Ma, Y., Sathyamurthy, R. & Tsang, Y. H., 15/05/2023, In: Desalination. 554, 10 p., 116488.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Enhancing surface functionalization of activated carbon using amino acids from natural source for CO2 capture

    Mohamed Hatta, N. S., Hussin, F., Gew, L. T. & Aroua, M. K., 15/05/2023, In: Separation and Purification Technology. 313, 15 p., 123468.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. E-pub ahead of print

    Physics-Informed Machine Learning for Accurate Prediction of Temperature and Melt Pool Dimension in Metal Additive Manufacturing

    Jiang, F., Xia, M. & Hu, Y., 8/05/2023, (E-pub ahead of print) In: 3D Printing and Additive Manufacturing.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. E-pub ahead of print

    Evolution of Vanadium Redox Flow Battery in Electrode

    Hossain, M. H., Abdullah, N., Tan, K. H., Saidur, R., Mohd Radzi, M. A. & Shafie, S., 5/05/2023, (E-pub ahead of print) In: The Chemical Record.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  21. Published

    Advancing cervical cancer diagnosis and screening with spectroscopy and machine learning

    Meza Ramirez, C. A., Greenop, M., Almoshawah, Y. A., Martin Hirsch, P. L. & Rehman, I. U., 4/05/2023, In: Expert Review of Molecular Diagnostics. 23, 5, p. 375-390 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  22. E-pub ahead of print

    Learning to Assist Bimanual Teleoperation using Interval Type-2 Polynomial Fuzzy Inference

    Wang, Z., Fei, H., Huang, Y., Rouxel, Q., Xiao, B., Li, Z. & Burdet, E., 3/05/2023, (E-pub ahead of print) In: IEEE Transactions on Cognitive and Developmental Systems. p. 1-1 1 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  23. Published

    Microfactory Design for Valorization of E-Waste Plastics (Acrylonitrile-Butadiene-Styrene, Polycarbonate, and Polypropylene) on Additive Manufacturing Sector

    Moure Abelenda, A. & Aiouache, F., 1/05/2023, In: Recycling. 8, 3, 46.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  24. Published

    A novel micromechanical method for nonlinear analysis of magnetostrictive composites

    Li, Z., Wang, Y., Liu, L., Shi, Y., Li, Y. & Ye, J., 1/05/2023, In: Composite Structures. 311, 16 p., 116633.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  25. Published

    Multistage laser shock improves surface structural properties of aluminum alloy

    Zhang, X., Xia, M., Zhang, C. & Hu, Y., 1/05/2023, In: International Journal of Mechanical Sciences. 245, 108101.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Investigation on the transitional micromechanical response of hybrid composite adhesive joints by a novel adaptive DEM model

    Wang, X., Yousefi Kanani, A., Gu, Z., Yang, J., Ye, J. & Hou, X., 30/04/2023, In: Theoretical and Applied Fracture Mechanics. 124, 15 p., 103760.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    Wire-feed laser additive manufacturing of dissimilar metals via dual molten pool interface interlocking mechanism

    He, Y., Zhang, X. H., Zhao, Z., Xu, S. H., Xia, M., Zhang, C. & Hu, Y. W., 30/04/2023, In: Science China Technological Sciences. 66, 4, p. 976-986 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    Self-sensing Sustainable Cementitious Mixtures Incorporating Carbon Fibres

    Almotlaq, T. & Saafi, M., 28/04/2023, In: MATEC Web of Conferences.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    Terahertz metasurface platform for modulation, holography, and encryption

    Degl’Innocenti, R., 26/04/2023, In: Advanced Photonics. 5, 02, 1 p., 020503.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Compact Back-End Electronics with Temperature Compensation and Efficient Data Management for In Situ SiPM-Based Radiation Detection

    Dixon, N., Monk, S., Graham, J. & Cheneler, D., 17/04/2023, In: Sensors. 23, 8, 20 p., 4053.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Tetrapods based engineering of organic phase change material for thermal energy storage

    Balasubramanian, K., Kumar Pandey, A., Abolhassani, R., Rubahn, H-G., Rahman, S. & Kumar Mishra, Y., 15/04/2023, In: Chemical Engineering Journal. 462, 14 p., 141984.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Real-time Quality Inspection of Motor Rotor Using Cost-effective Intelligent Edge System

    Zhu, Q., Lu, J., Wang, X., Wang, H., Lu, S., de Silva, C. W. & Xia, M., 15/04/2023, In: IEEE Internet of Things Journal. 10, 8, p. 7393-7404 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Localized nuclear reaction breaks boron drug capsules loaded with immune adjuvants for cancer immunotherapy

    Shi, Y., Guo, Z., Fu, Q., Shen, X., Zhang, Z., Sun, W., Wang, J., Sun, J., Zhang, Z., Liu, T., Gu, Z. & Liu, Z., 5/04/2023, In: Nature Communications. 14, 1, 15 p., 1884.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  34. Published

    Dynamic Finite Element Model Based on Timoshenko Beam Theory for Simulating High-Speed Nonlinear Helical Springs

    Zhao, J., Gu, Z., Yang, Q., Shao, J. & Hou, X., 4/04/2023, In: Sensors. 23, 7, 11 p., 3737.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    Compressive performance and deterioration mechanism of ultra-high performance concrete with coarse aggregates under and after heating

    Xue, C., Yu, M., Xu, H., Xu, L., Mohamed, S. & Ye, J., 1/04/2023, In: Journal of Building Engineering. 64, 20 p., 105502.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Electron beam weld penetration depth prediction improved by beam characterisation

    Yin, Y., Kennedy, A., Mitchell, T., Sieczkiewicz, N., Jefimovs, V. & Tian, Y., 31/03/2023, In: International Journal of Advanced Manufacturing Technology. 125, 1-2, p. 399-415 17 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  37. Published

    YOLOv5-lotus an efficient object detection method for lotus seedpod in a natural environment

    Ma, J., Lu, A., Chen, C., Ma, X. & Ma, Q., 31/03/2023, In: Computers and Electronics in Agriculture. 206, 13 p., 107635.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  38. Published

    A review on micromechanical modelling of progressive failure in unidirectional fibre-reinforced composites

    Wan, L., Ismail, Y., Sheng, Y., Ye, J. & Yang, D., 31/03/2023, In: Composites Part C: Open Access. 10, 19 p., 100348.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  39. Published

    Effect of laser scannings speed on microstructure, tribological and corrosion behavior of Ti-23Nb alloys produced by laser metal deposition

    Ren, Y., Wu, H., Du, J., Liu, B., Wang, X., Jiao, Z., Tian, Y. & Baker, I., 31/03/2023, In: Materials Characterization. 197, 8 p., 112647.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  40. Published

    Three-Phase Inverter Based on Isolated SEPIC/CUK Converters for large-scale PV applications

    Alotaibi, S., Darwish, A. & Williams, B. W., 31/03/2023, In: International Journal of Electrical Power and Energy Systems. 146, 39 p., 108723.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  41. Published

    Time-varying functional connectivity of rat brain during bipedal walking on unexpected terrain

    Liu, H., Li, B., Xi, P., Liu, Y., Li, F., Lang, Y., Tang, R., Ma, N. & He, J., 31/03/2023, In: Cyborg and Bionic Systems. 4, p. 0017

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  42. Published

    Aspen Plus® Process Simulation Model of the Biomass Ash-Based Treatment of Anaerobic Digestate for Production of Fertilizer and Upgradation of Biogas

    Moure Abelenda, A., Ali, A., Semple, K. & Aiouache, F., 27/03/2023, In: Energies. 16, 7, 22 p., 3039.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Force enhanced wire laser additive manufacturing of aluminum and titanium alloys

    Zhao, Z., Xu, S., Liu, J., Zhang, X., Xia, M. & Hu, Y., 25/03/2023, In: Journal of Alloys and Compounds. 938, 12 p., 168617.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  44. E-pub ahead of print

    Development of a Customer Churn Model for Banking Industry Based on Hard and Soft Data Fusion

    Alizadeh, M., Zadeh, D. S., Moshiri, B. & Montazeri, A., 15/03/2023, (E-pub ahead of print) In: IEEE Access. 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. E-pub ahead of print

    Comparative Production of Bio-Oil from In Situ Catalytic Upgrading of Fast Pyrolysis of Lignocellulosic Biomass

    Abdulkhani, A., Zadeh, Z. E., Bawa, S. G., Sun, F., Madadi, M., Zhang, X. & Saha, B., 14/03/2023, (E-pub ahead of print) In: Energies. 16, 6, 19 p., 2715.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  46. Published

    Design of a Fuel Explosion-Based Chameleon-Like Soft Robot Aided by the Comprehensive Dynamic Model

    Zhou, H., Cao, S., Zhang, S., Li, F. & Ma, N., 14/03/2023, In: Cyborg and Bionic Systems. 4, 14 p., 10.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  47. Published

    Thermohydraulic performance investigation of a heat exchanger with combined effect of ribbed insert and Therminol55/MXene+ Al2O3 nanofluid: A numerical two-phase approach

    Das, L., Aslfattahi, N., Habib, K., Saidur, R., Das, A. & Kadirgama, K., 10/03/2023, In: Heliyon. 9, 3

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    The Effect of Physicochemical Properties and Surface Chemistry on CO2 Adsorption Capacity of Potassium Acetate-Treated Carbon Pellets

    Hussin, F., Hazani, N. N. & Aroua, M. K., 9/03/2023, In: Sustainability. 15, 6, 4903.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  49. Published

    Reliable and Intelligent Fault Diagnosis with Evidential VGG Neural Networks

    Zhou, H., Chen, W., Cheng, L., Williams, D., De Silva, C. W. & Xia, M., 7/03/2023, In: IEEE Transactions on Instrumentation and Measurement. 72, p. 1-12 12 p., 3508612.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Optimisation of active SHM system based on optimal number and placement of piezoelectric transducers

    Daraji, A. H., Ye, J. & Hale, J. M., 1/03/2023, In: Journal of Intelligent Material Systems and Structures. 34, 4, p. 425-439 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Insights on the thermal potential of a state-of-the-art palm oil/MXene nanofluid in a circular pipe

    Abdelrazik, A. S., Saidur, R. & Al-Sulaiman, F. A., 28/02/2023, In: Journal of Thermal Analysis and Calorimetry. 148, 3, p. 913-926 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...6 7 8 9 10 11 12 13 ...124 Next

Back to top