Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

4101 - 4200 out of 6,516Page size: 100
RSS feed of this list
  1. 2011
  2. Published

    Backward wave oscillators for THz applications based on corrugated waveguide

    Mineo, M. & Paoloni, C., 1/02/2011, Vacuum Electronics Conference (IVEC), 2011 IEEE International. IEEE, p. 265-266 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    Backward-wave vacuum amplifier for THz amplification

    Mineo, M., Paoloni, C., Bariou, D., David, J.-F. & Durand, A. J., 1/02/2011, Vacuum Electronics Conference (IVEC), 2011 IEEE International. IEEE, p. 267 -268 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    State variable method for transient heat conduction analysis of composite sold cylinder

    Sheng, H. Y., Li, H. P., Ye, J. Q. & Wu, X. T., 1/02/2011, In: Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University. 45, 2, p. 247-251 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    The OPTHER project: Progress toward the THz amplifier

    Paoloni, C., Brunetti, F., Di Carlo, A., Mineo, M., Tamburri, E., Terranova, M. L., Ulisse, G., Durand, A., Marchesin, R., Pham, K., Krozer, V., Kotiranta, M., de Rossi, A., Dolfi, D., Guiset, P., Legagneux, P., Schnell, J. P., Fiorello, A., Dispenza, M. & Secchi, A. & 5 others, Zhurbenko, V., Megtert, S., Bouamrane, F., Cojocaru, C.-S. & Gohier, A., 1/02/2011, Vacuum Electronics Conference (IVEC), 2011 IEEE International. IEEE, p. 55-56 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  6. Published

    An oscillation-based technique for degradation monitoring of sensing and actuation electrodes within microfluidic systems.

    Al-Gayem, Q., Richardson, A., Liu, H. & Burd, N., 02/2011, In: Journal of Electronic Testing. 27, 3, p. 375-387 13 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Fibre laser welding of dissimilar alloys of Ti-6Al-4V and Inconel 718 for aerospace applications

    Chen, H.-C., Pinkerton, A. J. & Li, L., 02/2011, In: International Journal of Advanced Manufacturing Technology. 52, 9-12, p. 977-987 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Finite element simulation of low-density thermally bonded nonwoven materials: effects of orientation distribution function and arrangement of bond points

    Hou, X., Acar, M. & Silberschmidt, V., 02/2011, In: Computational Materials Science. 50, 4, p. 1292–1298 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. Published

    Gap-free fibre laser welding of Zn-coated steel on Al alloy for light-weight automotive applications

    Chen, H.-C., Pinkerton, A. J., Li, L., Liu, Z. & Mistry, A. T., 02/2011, In: Materials and Design. 32, 2, p. 495-504 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Innovative reconsolidation of carbon steel machining swarf by laser metal deposition

    Mahmood, K., Syed, W. U. H. & Pinkerton, A. J., 02/2011, In: Optics and Lasers in Engineering. 49, 2, p. 240-247 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  11. Published

    Test strategies for electrode degradation in bio-fluidic microsystems.

    Al-Gayem, Q., Honguan, L., Richardson, A. & Burd, N., 02/2011, In: Journal of Electronic Testing. 27, 1, p. 57-68 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    Acceleration technologies for charged particles: An introduction

    Carter, R. G., 1/01/2011, In: Contemporary Physics. 52, 1, p. 15-41 27 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  13. Published

    A new adaptive recursive RLS-based fast-array IIR filter for active noise and vibration control systems

    Montazeri, A. & Poshtan, J., 01/2011, In: Signal Processing. 91, 1, p. 98-113 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Autolysis of Blakeslea trispora during carotene production from cheese whey in an airlift reactor

    Varzakakou, M., Roukas, T., Papaioannou, E., Kotzekidou, P. & Liakopoulou-Kyriakides, M., 01/2011, In: Preparative Biochemistry and Biotechnology. 41, 1, p. 7-21 15 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Determination of the Constants of Formation of Complexes of Iron(III) and acetohydroxamic acid

    Andrieux, F., Boxall, C. & Taylor, R., 01/2011, Applications of Thermodynamics to Biological and Materials Science. Mizutani, T. (ed.). Rijeka, Croatia: InTech, p. 441-458 17 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  16. Published

    Modeling progressive delamination of laminated composites by discrete element method

    Yang, D., Ye, J., Tan, Y. & Sheng, Y., 01/2011, In: Computational Materials Science. 50, 3, p. 858-864 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  17. Published

    Non-uniformity of deformation in low-density thermally point bonded non-woven material: effect of microstructure

    Hou, X., Acar, M. & Silberschmidt, V., 01/2011, In: Journal of Materials Science. 46, 2, p. 307–315 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  18. Published

    Printed circuit board as a MEMS platform for focused ion beam technology

    Cheneler, D., Teng, J., Adams, M., Anthony, C. J., Carter, E. L. & Ward, M., 01/2011, In: Microelectronic Engineering. 88, 1, p. 121-126 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Swirling and impinging effects in an annular nonpremixed jet flame

    Jiang, X., Luo, K. H., de Goey, L. P. H., Bastiaans, R. J. M. & van Oijen, J. A., 01/2011, In: Flow, Turbulence and Combustion. 86, 1, p. 63-88 26 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    A CFD model of laser cladding: From deposition head to melt pool dynamics

    Ibarra-Medina, J., Vogel, M. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 378-386 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  21. Published

    A comparative study of different stable identification techniques using frequency domain subspace identification methods for a flexible plate

    Ahmadizadeh, S., Poshtan, J. & Montazeri, A., 2011, p. 833-836. 4 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  22. Published

    A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators

    Akurugoda Gamage, K. & Joyce, M., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  23. Published

    A GPU accelerated modeling of bio-effects associated with magnetic resonance imaging

    Hu, B., Glover, P. & Benson, T., 2011, Computational Problem-Solving (ICCP), 2011 International Conference on . IEEE, p. 431-435 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  24. Published

    Advanced Suspension Systems and Dynamics for Future Road Vehicles

    Cao, D. (Editor) & Song, X. (Editor), 2011, In: Vehicle System Dynamics. 49, 1-2, p. 1-418 418 p.

    Research output: Contribution to Journal/Magazine › Special issue › peer-review

  25. Published

    Advanced vehicle handling dynamics and control

    Cao, D. (Editor), Rakheja, S. (Editor) & Yang, X. (Editor), 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-366 366 p.

    Research output: Contribution to Journal/Magazine › Special issue › peer-review

  26. Published

    An analytical approach to gamma-ray self-shielding effects for radioactive bodies encountered nuclear decommissioning scenarios

    Akurugoda Gamage, K. & Joyce, M., 2011, In: Applied Radiation and Isotopes. 69, 10, p. 1521-1532 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  27. Published

    An Auxetic structure configured as oesophageal stent with potential to be used for palliative treatment of oesophageal cancer; Development and in vitro mechanical analysis

    Ali, M. N. & Rehman, I. U., 2011, In: Journal of Materials Science: Materials in Medicine. 22, 11, p. 2573-2581 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  28. Published

    An Independent Validation of the Optimality of Latching and De-clutching Control by Evolutionary Methods.

    Gunn, K. J., Taylor, C. J. & Lingwood, C. J., 2011, 9th European Wave and Tidal Energy Conference.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  29. Published

    An integrated model of laser clad formation using CFD and FE methods

    Vogel, M., Ibarra-Medina, J., N'Dri, N. & Pinkerton, A. J., 2011, Surface modification technologies XXV : Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. & Nylen, P. (eds.). India: Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  30. Published

    Application of hydrodechlorination in environmental pollution control: Comparison of the performance of supported and unsupported Pd and Ni catalysts

    Amorim, C., Wang, X. & Keane, M. A., 2011, In: Chinese Journal of Catalysis. 32, 5, p. 746-755 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Bio-hybrid tactile sensor for the study of the role of mechanoreceptors in human tactile perception

    Cheneler, D., Ward, M. & Anthony, C., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  32. Published

    Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites

    Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  33. Published

    Buckling behaviour of concrete- filled elliptical steel columns

    Lam, D., Dai, X., Jamaluddin, N. & Ye, J., 2011, 7th International Conference on Steel & Aluminium Structures (ICSAS2011), Kuching, Sarawak, Malaysia. Ho, L. H. (ed.).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  34. Published

    Carbon dioxide conversation: overcoming thermodynamic limitations

    Najdanovic-Visak, V., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  35. Published

    Comprehensive modeling of THz microscope with a sub-wavelength source

    Lin, H., Fumeaux, C., Ung, B. S. Y. & Abbott, D., 2011, In: Optics Express. 19, 6, p. 5327-5338 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Crystallographic engineering of oxide semiconductors for transistors and microelectronics applications

    Thomas, S., Adamopoulos, G., Bashir, A., Bradley, D. & Anthopoulos, T., 2011, Materials Research Society.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  37. Published

    Dental regeneration

    Rehman, I. U. & Khan, A. S., 2011, Electrospinning for Tissue Regeneration. Elsevier Inc., p. 280-297 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  38. Published

    Depth profiling with Principle component Analysis in a variety of contrasting media

    Adams, J., Joyce, M. & Mellor, M., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  39. Published

    Developing an IIR Robust Adaptive Algorithm in the Modified Filtered-x RLS Form for Active Noise and Vibration Control Systems

    Montazeri, A. & Reger, J., 2011, Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on. New York: IEEE, p. 7994-7999 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    Digital approaches to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator

    Akurugoda Gamage, K., Joyce, M. & Taylor, G., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  41. Published

    Direct e-beam lithography of PDMS

    Bowen, J., Cheneler, D. & Robinson, A., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  42. Published

    Editors' perspectives: road vehicle suspension design, dynamics, and control

    Cao, D., Song, X. & Ahmadian, M., 2011, In: Vehicle System Dynamics. 49, 1-2, p. 3-28 26 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    Effects of Shear Connector's Position in Profiled Sheeting on Strength and Ductility.

    Lam, D., Qureshi, J. & Ye, J., 2011, 5th International Conference on Steel & Composite Structures, Seoul, Korea..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  44. Published

    Extension of the Linear Depth Attenuation Method for the Radioactivity Depth Analysis Tool (RADPAT)

    Shippen, A. & Joyce, M., 2011, In: IEEE Transactions on Nuclear Science. 58, 3, p. 1145-1150 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Published

    Finite Element Modelling of Slender Concrete Filled Elliptical Steel Columns

    Lam, D., Dai, X., Ye, J. & Jamaluddin, N., 2011, EUROSTEEL 2011, Budapest, Hungary. .

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  46. Published

    First-principles and genetic modelling of precipitation sequences in aluminium alloys

    De Jong, M., Dutta, R. K., Sluiter, M. H. F., Miroux, A. G., Van Der Zwaag, S., Sietsma, J. & Rivera Diaz Del Castillo, P. E. J., 2011, Solid-Solid Phase Transformations in Inorganic Materials. Zurich: Trans Tech Publications Inc., Vol. 172-174. p. 285-290 6 p. (Solid State Phenomena; vol. 172-174).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    High-strength nanograined and translucent hydroxyapatite monoliths via continuous hydrothermal synthesis and optimized spark plasma sintering

    Chaudhry, A. A., Yan, H., Gong, K., Inam, F., Viola, G., Reece, M. J., Goodall, J. B. M., Ur Rehman, I., McNeil-Watson, F. K., Corbett, J. C. W., Knowles, J. C. & Darr, J. A., 2011, In: Acta Biomaterialia. 7, 2, p. 791-799 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  48. Published

    Hybrid Phototransistors-based on Dye-functionalised ZnO Semiconducting Channels

    Pattanasattayavong, P., Thomas, S., Adamopoulos, G., Labram, J. & Anthopoulos, T., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  49. Published

    Hydrogen production by sorption enhanced steam reforming of propane: A thermodynamic investigation

    Wang, X., Wang, N. & Wang, L., 2011, In: International Journal of Hydrogen Energy. 36, 1, p. 466-472 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  50. Published

    Identification of a stable model for a flexible plate using frequency domain subspace methods

    Ahmadizadeh, S., Montazeri, A. & Poshtan, J., 2011, 18th IFAC World Congress. IFAC, p. 6517-6522 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  51. Published

    Investigation of high speed micro-bump formation through electrodeposition enhanced by megasonic agitation

    Tian, Y., Liu, C., Hutt, D., Stevens, B., Flynn, D. & Desmulliez, M. P. Y., 2011, Electronic Packaging Technology and High Density Packaging (ICEPT-HDP), 2011 12th International Conference on. IEEE, p. 739-744 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  52. Published

    Large Eddy Simulation of Diesel Fuel Injection and Mixing in a HSDI Engine

    Jagus, K. & Jiang, X., 2011, In: Flow, Turbulence and Combustion. 87, 2-3, p. 473-491 19 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Laser metal deposition of steel components using machining waste as build material

    Mahmood, K., Khan, A. & Pinkerton, A. J., 2011, Proceedings of CLEO, the IEEE Conference on Lasers and Electro-Optics. New York: IEEE, p. - 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  54. Published

    Laser surface cladding of Inconel 617 chips on mild steel

    Mahmood, K., Pinkerton, A. J. & Syed, W. U. H., 2011, Proceedings of the 25th International Conference on Surface Modification Technologies. Sudarshan, T. S. (ed.). Valardocs

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  55. Published

    Lessons learnt from recent nuclear build projects

    Garnsey, R., Nickson, I. & Joyce, M., 2011, In: Proceedings of the ICE - Energy. 164, 2, p. 57-70 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    Li-Doped Zinc oxide Transistors and circuits fabricated by spray deposition in ambient atmosphere.

    Adamopoulos, G., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  57. Published

    Liquid scintillator neutron detection for real-time nuclear material assay

    Lavietes, A., Pickrell, M., Plentada, R., Mascarenhas, M., Liguori, C., Aspinall, M. & Joyce, M., 2011. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  58. Published

    Material-efficient laser cladding for corrosion resistance

    Mahmood, K., Stevens, N., Syed, W. U. H. & Pinkerton, A. J., 2011, Proceedings of the 30th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 695-704 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  59. Published

    Microfabrication of flexible large-area terahertz fishnet metamaterials

    Shah, C. M., Sriram, S., Bhaskaran, M., Khodasevych, I. E., Withayachumnankul, W., Ung, B. S. Y., Lin, H., Abbott, D. & Mitchell, A., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  60. Published

    Minimax-LQG control of a flexible plate using frequency domain subspace identified models

    Ahmadizadeh, S., Montazeri, A., Poshtan, J., Mahjoob, M. J. & Kamaldar, M., 2011, Mechatronics (ICM), 2011 IEEE International Conference on. IEEE, p. 265-270 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  61. Published

    Modeling neutron interactions and charge collection in the Imaging Single-Event Effects Monitor

    Cai, X. X. & Platt, S. P., 2011, In: IEEE Transactions on Nuclear Science. 58, 3, p. 910-915 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. Published

    Modeling of large plastic deformation behavior and anisotropy evolution in cold rolled bcc steels using the viscoplastic φ-model-based grain-interaction

    M'Guil, S., Wen, W., Ahzi, S. & Gracio, J. J., 2011, In: Materials Science and Engineering: A. 528, 18, p. 5840-5853 14 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    Modelling generalisation and power dissipation of flexible-wheel suspension concept for planetary surface vehicles

    Cao, D., Khajepour, A. & Song, X., 2011, In: Vehicle System Dynamics. 49, 8, p. 1299-1320 22 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Multi-scale modelling of damage progression in FRC laminates - Applications of DEM

    Yang, D., Sheng, Y., Ye, J. & Tan, Y., 2011, Particle-Based Methods II: Fundamentals and Applications. Onate, E. & Owen, D. R. J. (eds.). Barcelona: International Center for Numerical Methods in Engineering (CIMNE), p. 256-263 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  65. Published

    Near-field & far-field modelling of a sub-wavelength THz source

    Lin, H., Fumeaux, C., Fischer, B. M. & Abbott, D., 2011, Infrared, Millimeter and Terahertz Waves (IRMMW-THz), 2011 36th International Conference on. IEEE, 2 p. 6104774

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  66. Published

    Nonlinear compression behavior of warp-knitted spacer fabric: effect of sandwich structure

    Hou, X., Hu, H., Liu, Y. & Silberschmidt, V., 2011, In: Computers, Materials & Continua. 23, 2, p. 119-134 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  67. Published

    Numerical Modelling of Damage Progression in Single-fiber Composite under Axial Tension

    Yang, D., Sheng, Y., Ye, J., Tan, Y. & Jiang, S., 2011, In: Advanced Materials Research. 268-270, p. 280-285 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  68. Published

    Prediction of multipactor in the iris region of rf deflecting mode cavities

    Burt, G. & Dexter, A., 2011, In: Physical Review Special Topics: Accelerators and Beams. 14, 12, 11 p., 122002.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  69. Published

    Product Optimization by Rapid Manufacturing and Targeted Functional Analysis

    Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  70. Published

    Proportional-integral-plus control of robotic excavator arm utilising state-dependent parameter model

    Gu, J., Feng, Z.-H., Ma, X. & Ni, J.-F., 2011, In: Applied Mechanics and Materials. 48-49, p. 1323-1327 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  71. Published

    Realistic Modeling of High Rise Structures subjected to Progressive Collapse

    Stephen, D., Ye, J. & Lam, D., 2011, The Thirteenth International Conference on Civil, Structural and Environmental Engineering Computing, Crete, Greece..

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  72. Published

    Real-time digital imaging of neutrons and gamma rays with a fast liquid scintillator detector

    Gamage, K. & Joyce, M., 2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Speech

  73. Published

    Real-time digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: prospects for safety and security

    Joyce, M. & Aspinall, M., 2011. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  74. Published

    Real-time, digital pulse-shape discrimination in non-hazardous fast liquid scintillation detectors: Prospects for safety and security

    Joyce, M. J., Aspinall, M. D., Cave, F. D. & Lavietes, A. D., 2011, ANIMMA 2011 - Proceedings: 2nd International Conference on Advancements in Nuclear Instrumentation, Measurement Methods and their Applications. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  75. Published

    Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension

    Pazooki, A., Cao, D., Rakheja, S. & Boileau, P.-E., 2011, In: Vehicle System Dynamics. 49, 9, p. 1455-1476 22 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  76. Published

    Selective laser melting for near net-shape manufacturing: Investigation into structure-parameter relationships and phase determination by X-ray diffraction in stainless steel alloy systems

    Green, S., OMeara, N. & Rennie, A., 2011. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  77. Published

    Semi-Active Suspension Design for Enhancing Vehicle Ride, Road-Friendliness and Braking Performance

    Cao, D. & Khajepour, A., 2011. 10 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  78. Published

    Simulation guided design of a cryogenic probe for micrometer-scale in vivo MR imaging

    Hu, B., Glover, P. & Benson, T., 2011, Computational Problem-Solving (ICCP), 2011 International Conference on. IEEE, p. 647-651 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  79. Published

    Smart pipes-instrumented water pipes, can this be made a reality?

    Metje, N., Chapman, D. N., Cheneler, D., Ward, M. & Thomas, A. M., 2011, In: Sensors. 11, 8, p. 7455-7475 21 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  80. Published

    Special issue on advanced vehicle handling dynamics and control

    Cao, D., Rakheja, S. & Yang, X., 2011, In: International Journal of Vehicle Design. 56, 1-4, p. 1-3 3 p.

    Research output: Contribution to Journal/Magazine › Editorial

  81. Published

    Spray Deposited Lithium-doped Zinc Oxide Thin-film Transistors with Electron Mobility Exceeding 50 cm2/Vs

    Adamopoulos, G., Bradley, D. & Anthopoulos, T., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  82. Published

    State dependent feed-forward control for wave energy conversion

    Cross, P., Taylor, J. & Aggidis, G., 2011, 9th European Wave and Tidal Energy Conference. EWTEC

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  83. Published

    Strong coupling between intersubband transitions and surface plasmons sustained by a metallic grating

    Zanotto, S., Degl'Innocenti, R., Biasiol, G., Sorba, L. & Tredicucci, A., 2011, Quantum Electronics and Laser Science Conference, QELS 2011.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  84. Published

    Sub-wavelength THz source modelling

    Lin, H., Fumeaux, C., Fischer, B. M. & Abbott, D., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  85. Published

    Synthesis of fatty acid methyl esters via direct transesterification with methanol/carbon dioxide mixtures from spent coffee grounds feedstock

    Calixto, F., Fernandes, J., Couto, R., Hernandez, E. J., Najdanovic-Visak, V., Simoes, P. C. & Najdanovic-Visak, V., 2011, In: Green Chemistry. 13, 5, p. 1196-1202 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  86. Published

    The advancement of a technique using principal component analysis for the non-intrusive depth profiling of radioactive contamination

    Adams, J., Mellor, M. & Joyce, M., 2011. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  87. Published

    The design and calibration of a phantom for depth profiling measurements of entrained radioactivity in silica-based media

    Shippen, A. & Joyce, M., 2011, In: Nuclear Engineering and Design. 241, 2, p. 526-532 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    The determination of the depth of localised radioactive contamination by 137Cs and 60Co in sand with principal component analysis

    Adams, J., Mellor, M. & Joyce, M., 2011, In: Environmental Science and Technology. 45, 19, p. 8262-8267 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  89. Published

    The impact of hybrid and electric powertrains on vehicle dynamics and control systems

    Crolla, D. & Cao, D., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  90. Published

    The influence of wetting on the buoyancy of particles

    Bowen, J., Cheneler, D., Ward, M. & Adams, M., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  91. Published

    The measurement and analysis of the adhesion arising from non-Newtonian liquid bridges

    Adams, M., Bowen, J., Cheneler, D., Avery, A. & Zhang, Z., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  92. Published

    Urban bus driver ride and road-friendliness. Part I: model development and role of operating parameters

    Rakheja, S., Cao, D. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 305-332 28 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  93. Published

    Urban bus driver ride and road-friendliness. Part II: subjective suspension damping tuning and objective optimization

    Cao, D., Rakheja, S. & Wang, Z., 2011, In: International Journal of Vehicle Design. 57, 4, p. 333-358 26 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. 2010
  95. Published

    Triangulating the height of cosmic noise absorption: A method for estimating the characteristic energy of precipitating electrons

    Wild, P., Honary, F., Kavanagh, A. J. & Senior, A., 21/12/2010, In: Journal of Geophysical Research. 115, A12326, p. 1-11 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    Subwavelength vortical plasmonic lattice solitons

    Ye, F., Mihalache, D., Hu, B. & Panoiu, N. C., 16/12/2010, In: Optics Letters. 36, 7, p. 1179-1181 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  97. Published

    Photocatalytic initiation of electroless deposition

    Bromley, M. A., Boxall, C., Galea, S., Goodall, P. S. & Woodbury, S., 15/12/2010, In: Journal of Photochemistry and Photobiology A: Chemistry. 216, 2-3, p. 228-237 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  98. Published

    The development of a method for the simultaneous measurement of cerium (iv) and chromium (vi) species in nitric acid media

    Nickson, I. D., Boxall, C., Jackson, A. & Whillock, G. O. H., 12/12/2010, ASME 12th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM09): Volume 1: Low/Intermediate-Level Waste Management; Spent Fuel, Fissile, Transuranic, High-Level Waste Management. NEW YORK: AMER SOC MECHANICAL ENGINEERS, p. 163-169 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  99. Published

    Intersubband polaritons in a one-dimensional surface plasmon photonic crystal

    Zanotto, S., Biasiol, G., Degl'Innocenti, R., Sorba, L. & Tredicucci, A., 6/12/2010, In: Applied Physics Letters. 97, 23, 3 p., 231123.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  100. Published

    Enolate amination and derivatization of a pyrroloisoquinoline template: Towards novel peptidomimetics

    Allin, S. M., Towler, J., Gaskell, S. N., Saha, B., Martin, W. P., Page, P. C. B. & Edgar, M., 4/12/2010, In: Tetrahedron. 66, 49, p. 9538-9544 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  101. Unpublished

    Analysis and verification of fuel exhaust emissions.

    Ma, X., 2/12/2010, (Unpublished) 12 p.

    Research output: Working paper

  102. Published

    Active minimization of periodic sound inside a vibro-acoustic rectangular enclosure using finite element model

    Mohamady, S., Montazeri, A. & Ahmad, R. K. R., 1/12/2010, 39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010. p. 280-289 10 p. (39th International Congress on Noise Control Engineering 2010, INTER-NOISE 2010; vol. 6).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1...38 39 40 41 42 43 44 45 ...66 Next

Back to top