Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Published

    A systems approach to environmental engineering.

    Bradshaw, A., Burge, S. E., Chotai, A. & Young, P. C., 1994, Proceedings of the 1st conference of the forum for environmental engineering education. Dundee, p. 35-42 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  2. Published

    Robo Sapiens: a personal assistant robot.

    Bradshaw, A., Seward, D. W. & Nagy, F. N., 1994, Mechatronics - the basis for a new industrial development. Acar, M., Makra, J. & Penney, E. (eds.). Southampton: Computational Mechanics Publications, p. 159-164 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  3. Published

    Advanced digital controllers for servo-pneumatic actuated machines.

    Bradshaw, A. & Counsell, J. M., 1993, Proceedings of IMechE seminar on machine actuators. London, p. 5-9 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  4. Published

    Multi-tariff optimisation for domestic heating systems which combine the use of storage and direct heaters.

    Bradshaw, A. & Dickinson, S. J., 1993, Proceedings of the international conference on engineering software. Stafford, p. 43-49 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  5. Published

    Design of autopilots for high performance missiles.

    Bradshaw, A. & Counsell, J. M., 1992, In: Journal of Systems and Control. 206, p. 75-84 10 p.

    Research output: Contribution to Journal/MagazineJournal article

  6. Published

    A conceptual study for a computer-based tool to support electronics design in a mechatronic environment.

    Bradley, D. A., Walters, R. M. & Dorey, A. P., 2000, In: Microprocessors and Microsystems. 24, 2, p. 51-61 11 p.

    Research output: Contribution to Journal/MagazineJournal article

  7. Published

    The development, control and operation of an autonomous robotic excavator.

    Bradley, D. A. & Seward, D. W., 01/1998, In: Journal of Intelligent and Robotic Systems. 21, 1, p. 73-97 25 p.

    Research output: Contribution to Journal/MagazineJournal article

  8. Published

    Developing real-time autonomous excavation - the LUCIE story.

    Bradley, D. A. & Seward, D. W., 1995, Developing real-time autonomous excavation - the LUCIE story. New Orleans, p. 3028-3033 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  9. Published

    Mechatronics and intelligent systems.

    Bradley, D. A., Bradshaw, A., Seward, D. W. & Margrave, F. W., 1994, Proceedings of the second IEE international conference on intelligent systems engineering. London: IEE, p. 395-400 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  10. Published

    The development of a boost-modulated controller for a pwm inverter and a three-phase induction motor based drive Part 1.

    Bradley, D. A. & Larbes, C., 1994, Proceedings of an international ASME conference on systems - analysis, control and design, SYS'94. Lyon, p. 49-64 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  11. Published

    The development of a boost-modulated controller for a pwm inverter and a three-phase induction motor based drive Part 2.

    Bradley, D. A. & Larbes, C., 1994, Proceedings of an international ASME conference on systems - analysis, control and design, SYS'94. Lyon, p. 65-80 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  12. Published

    Control architectures and operational strategies for intelligent, high-powered manipulators.

    Bradley, D. A., Seward, D. W., Heikkila, T. & Vaha, P., 1994, Proceedings of the 11th international symposium on automation and robotics in construction XI (ISARC). Amsterdam: Elsevier, p. 367-372 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  13. Published

    Sensors in manufacturing systems.

    Bradley, D. A., 1993, Sensors and actuators VI. Institute of Physics, p. 411-422 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  14. Published

    Operation of AGVs using information derived from encoded tiles.

    Bradley, D. A., Bouguechal, N. & Chaplin, R. V., 1993, In: Computer Integrated Manufacturing Systems. 6, 3, p. 167-175 9 p.

    Research output: Contribution to Journal/MagazineJournal article

  15. Published

    Engineering design and mechatronics - the Schemebuilder Project.

    Bradley, D. A., Bracewell, R. H. & Chaplin, R. V., 12/1992, In: Research in Engineering Design. 4, 4, p. 241-248 8 p.

    Research output: Contribution to Journal/MagazineJournal article

  16. Published

    The representation of mechatronic systems.

    Bradley, D. A. & Buur, J., 1993, Proceedings of the 9th international conference on engineering design, ICED '93. Zurich: Heurista, p. 37-44 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  17. Published

    Artificial intelligence in the control and operation of construction plant - the autonomous robot excavator.

    Bradley, D. A., Seward, D. W., Mann, J. E. & Goodwin, M. R., 1993, In: Automation in Construction. 2, 3, p. 217-228 12 p.

    Research output: Contribution to Journal/MagazineJournal article

  18. Published

    Computer support for engineering design - the schemebuilder project.

    Bradley, D. A. & Bracewell, R. H., 1992, SERC/IMechE expert meeting on information technology and product design. St Albans, p. 69-73 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  19. Published

    An integrated electronic degree scheme - the Lancaster electronics course.

    Bradley, D. A., Dorey, A. P., Silvester, P. J. & Adelson, R. M., 1992, Innovative teaching in engineering. Smith, R. A. (ed.). London: Ellis Horwood, 530 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  20. Published

    Intelligent domestic products - past present and future.

    Bradley, D. A., Hoyle, D. A. & Harden, B., 1992, IEE colloquium on intelligent domestic products. London

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  21. Published

    Artificial intelligence and robot construction plant - the smart artisan.

    Bradley, D. A. & Seward, D. W., 1992, IEE colloquium on artificial intelligence in civil engineering. London, p. 8/1-8/3

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  22. Published

    Artificial intelligence in the operation of construction plant.

    Bradley, D. A. & Seward, D. W., 1992, 9th international symposium on automation and robotics in construction. Tokyo

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  23. Published

    The Lancaster University computerised excavator programme.

    Bradley, D. A. & Seward, D. W., 1992, Mechatronics - the integration of engineering design. Dundee: IMechE, p. 163-168 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  24. Published

    Integrated platform for AI support of complex design (part II): supporting the embodiment process.

    Bracewell, R. H., Chaplin, R. V., Langdon, P. M., Li, M., Oh, V. K. & Sharpe, J. E. E., 1995, Proceedings of the 1995 Lancaster international workshop on engineering design published as AI support for conceptual design. Sharpe, J. E. E. & Oh, K. V. (eds.). Ambleside: Springer-Verlag, p. 189-207 19 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  25. Published

    Integrated computer support for interdisciplinary system design.

    Bracewell, R. H., Chaplin, R. V., Langdon, P. M., Li, M., Oh, V. K., Sharpe, J. E. E. & Yan, X. T., 1994, Proceedings of the 3rd international conference on artificial intelligence in design. Lausanne

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  26. Published

    The use of bond graph methodology in an integrated interdisciplinary design system.

    Bracewell, R. H. & Sharpe, J., 1994, Mechatronics - the basis for a new industrial development. Acar, M., Makra, J. & Penney, E. (eds.). Southampton: Computational Mechanics Publications, p. 595-600 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  27. Published

    Schemebuilder: a design aid for the conceptual stage of product design.

    Bracewell, R. H., Chaplin, R. V., Bradley, D. A., Langdon, P. M. & Sharpe, J., 1993, Proceedings of the 9th international conference on engineering design, ICED '93. Zurich: Heurista

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  28. Published

    Schemebuilder and layout: computer based tools to aid the design of mechatronic systems.

    Bracewell, R. H., Chaplin, R. V. & Bradley, D. A., 1992, IMechE Conference: Mechatronics - the integration of engineering design. Dundee, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  29. Published

    Electromagnetic mode profile shaping in waveguides

    Boyd, T., Kinsler, P., Gratus, J. & Letizia, R., 14/08/2016, Electromagnetic Theory (EMTS), 2016 URSI International Symposium on. IEEE, p. 725-727 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  30. Published

    Customizing longitudinal electric field profiles using spatial dispersion in dielectric wire arrays

    Boyd, T., Gratus, J., Kinsler, P. & Letizia, R., 5/02/2018, In: Optics Express. 26, 3, p. 2478-2494 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  31. Published

    Mode profile shaping in wire media: towards an experimental verification

    Boyd, T., Gratus, J., Kinsler, P., Letizia, R. & Seviour, R., 1/08/2018, In: Applied Sciences. 8, 8, 11 p., 1276.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    Photoelectrophoresis of colloidal semiconductors. Part 2.—Transient experiments on TiO2 particles

    BOXALL, C. & KELSALL, G. H., 1991, In: Journal of the Chemical Society. Faraday Transactions Part 2. 87, 21, p. 3547-3556 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  33. Published

    Photoelectrophoresis of colloidal semiconductors. Part 1.—The technique and its applications

    BOXALL, C. & KELSALL, G. H., 7/11/1991, In: Journal of the Chemical Society, Faraday Transactions. 87, 21, p. 3537-3545 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    HYPOCHLORITE ELECTROGENERATION .2. THERMODYNAMICS AND KINETIC-MODEL OF THE ANODE REACTION LAYER

    BOXALL, C. & KELSALL, G. H., 1992, ELECTROCHEMICAL ENGINEERING AND THE ENVIRONMENT 92. RUGBY: INST CHEMICAL ENGINEERS, p. 59-70 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    Photoelectrophoresis of colloidal semiconductors part III. Transient experiments on SnO2 particles

    BOXALL, C. & KELSALL, G. H., 1/07/1992, In: Journal of Electroanalytical Chemistry. 328, 1-2, p. 75-97 23 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  36. Published

    The electrophoresis of semiconductor particles

    BOXALL, C., 04/1994, In: Chemical Society Reviews. 23, 2, p. 137-145 9 p.

    Research output: Contribution to Journal/MagazineLiterature reviewpeer-review

  37. Published

    Photoelectrophoresis of colloidal iron oxides .2. Magnetite (Fe3O4)

    Boxall, C., Kelsall, G. & Zhang, Z., 7/03/1996, In: Journal of the Chemical Society, Faraday Transactions. 92, 5, p. 791-802 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  38. Published

    Photoelectrochemistry with the optical rotating disc electrode Part 4. Steady state and transient studies on colloidal US in the presence of solution phase photogenerated charge scavengers

    Boxall, C., 31/05/2002, In: Journal of Photochemistry and Photobiology A: Chemistry. 148, 1-3, p. 375-386 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  39. Published

    Photoelectrochemistry with the optical rotating disc electrode - Part 3. The theoretical analysis for photophysical-chemical-electrochemical (PCE) processes

    Boxall, C. & Albery, W. J., 2000, In: Physical Chemistry Chemical Physics. 2, 16, p. 3651-3662 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  40. Published

    Photoelectrochemistry with the optical rotating disc electrode - Part 2. Steady-state and transient studies on colloidal CdS

    Boxall, C. & Albery, W. J., 2000, In: Physical Chemistry Chemical Physics. 2, 16, p. 3641-3650 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  41. Published

    Photoelectrochemistry with the optical rotating disc electrode - Part 1. The theoretical analysis for photophysical-electrochemical processes

    Boxall, C. & Albery, W. J., 2000, In: Physical Chemistry Chemical Physics. 2, 16, p. 3631-3639 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  42. Published

    The Photoelectrophoresis of Colloidal Iron Oxides I: Hematite (alpha-Fe2O3)

    Boxall, C., Zhang, Z. & KELSALL, G. H., 1993, Colloids in the Aquatic Environment. Thadros, T. & Gregory, J. (eds.). Amsterdam: Elsevier Science Ltd., p. 145-163 19 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  43. Published

    Kinetic modeling of electron transfer processes in colloidal semiconductor photocatalysis

    Boxall, C., 1999, Applications of Kinetic Modelling. Compton, R. G. & Hancock, G. (eds.). Elsevier, Vol. 37. p. 281-368 88 p. (Comprehensive Chemical Kinetics).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  44. Published

    The applications of photocatalytic waste minimisation in nuclear fuel processing

    Boxall, C., Le Gurun, G., Taylor, R. J. & Xiao, S., 2005, Handbook of Environmental Chemistry. Huntzinger, O. (ed.). Berlin: SPRINGER-VERLAG BERLIN, Vol. 2. p. 451-481 31 p. (Handbook of Environmental Chemistry ; vol. 2).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  45. Published

    The Micro-Optical Ring Electrode: development of a thin ring electrode for spectrophotoelectrochemistry

    Boxall, C., Andrieux, F., Xiao, S. & O'Hare, D., 2001, Chemical and Biological Sensors and Analytical Methods II. Butler, M. A., Vanysek , P. & Yamazoe , N. (eds.). Pennington, New Jersey: ELECTROCHEMICAL SOCIETY INC, p. 531-543 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  46. Published

    The application of photocatalysis in transition metal and actinide redox chemistry

    Boxall, C., Le Gurun, G. & Taylor, R. J., 2004, Recent Research Developments in Photochemistry and Photobiology. Trivandrum, India: Transworld Research Network, Vol. 7. p. 39-78 40 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  47. Published

    The reduction of Pu(IV) by formohydroxamic acid in nitric acid.

    Boxall, C., Taylor, R. J., Mason, C. & Cooke, R., 2002, In: Journal of Nuclear Science and Technology. supplement 3, p. 278-281 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  48. Published

    Hydrolysis of Hydroxamic Acid Complexants in the Presence of Non-Oxidizing Metal Ions

    Boxall, C., Andrieux, F., Edwards, S., Taylor, R. J. & Woodhead, D., 2012, In: MRS Online Proceedings Library. 1383, 6 p., mrsf11-1383-a07-02.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  49. Published

    Fixed Contamination on Steel Surfaces: First Use of Quartz Crystal Microgravimetry to Measure Oxide Growth on Process Steels Under Conditions Typical of Nuclear Reprocessing

    Boxall, C., Woodhouse, B. & Wilbraham, R., 2012, In: MRS Online Proceedings Library. 1383, 6 p., mrsf11-1383-a07-04.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    Surface Decontamination by Photocatalysis

    Boxall, C., Wilbraham, R., Taylor, R. J. & Woodbury, S., 2012, In: MRS Online Proceedings Library. 1383, 7 p., mrsf11-1383-a07-07.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  51. Published

    Recent Studies of Heterogeneous and Homogeneous Reduction–Oxidation Reactions of U(IV) Ions in Nitric Acid and TBP Phases

    Boxall, C., Taylor, R., Xiao, S., Koltunov, V. & Marchenko, V., 2002, Proceedings of 3rd NUCEF International Symposium: NUCEF 2001: Scientific Basis for Criticality Safety, Separations and Waste Disposal. Banba, T. & Tsubata, Y. (eds.). Tokai, Ibaraki, Japan: Japan Atomic Energy Research Institute, p. 205-212 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  52. Published

    Mesoporous and Nanoparticulate Metal Oxides: Applications in New Photocatalysis

    Boxall, C., 2006, Proceedings of the 10th Asian Conference on Solid State Ionics: Advanced Materials for Emerging Technologies. Chowdari, B. V. R., Careem, M. A., Dissanayake, M. A. K. L., Rajapakse, R. M. G. & Seneviratne, V. A. (eds.). Singapore: World Scientific, p. 788 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  53. Published

    The Application of Colloidal Photocatalysis in Actinide Photoredox Chemistry

    Boxall, C., Taylor, R. & LeGurun, G., 2006, RSC Special Publication: Recent Advances in Actinide Science. May, I., Alvares, R. & Bryan, N. (eds.). Cambridge: Royal Society of Chemistry, Vol. 305. p. 113-115 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  54. Published

    Investigation of water adsorption on metal oxide surfaces under conditions representative of PuO2 storage containers

    Boxall, C., Murphy, P., Taylor, R. & Woodhead, D., 09/2013, In: ECS Transactions. 53, 21, p. 81-94 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  55. Published

    The effect of acetohydroxamic acid on stainless steel corrosion in nitric acid

    Boxall, C. & Wilbraham, R. J., 01/2016, In: Electrochemistry Communications. 62, p. 52-55 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  56. Published

    A dynamic model of the jump-to phenomenon during AFM analysis

    Bowen, J. & Cheneler, D., 18/12/2012, In: Langmuir. 28, 50, p. 17273-17286 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  57. Published

    Application of colloid probe atomic force microscopy to the adhesion of thin films of viscous and viscoelastic silicone fluids

    Bowen, J., Cheneler, D., Andrews, J. W., Avery, A. R., Zhang, Z., Ward, M. C. L. & Adams, M. J., 20/09/2011, In: Langmuir. 27, 18, p. 11489-11500 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  58. Published

    Controlling thin liquid film viscosity via modification of substrate surface chemistry

    Bowen, J., Cheneler, D. & Adams, M., 5/02/2013, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 418, p. 112-116 5 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  59. Published

    Direct e-beam lithography of PDMS

    Bowen, J., Cheneler, D. & Robinson, A., 09/2012, In: Microelectronic Engineering. 97, p. 34-37 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  60. Published

    On the calibration of rectangular atomic force microscope cantilevers modified by particle attachment and lamination

    Bowen, J., Cheneler, D., Walliman, D., Arkless, S. G., Zhang, Z., Ward, M. C. L. & Adams, M. J., 11/2010, In: Measurement Science and Technology. 21, 11, 115106.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  61. Published

    Rebound of a particle from a surface with a viscous and nonlinear viscoelastic liquid in the contact zone

    Bowen, J., Cheneler, D., Andrews, J., Wu, C., Ward, M. & Adams, M., 2012, Discrete element modelling of particulate media. Wu, C. (ed.). Cambridge: RSC Publishing, p. 86-94 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  62. Published

    The influence of wetting on the buoyancy of particles

    Bowen, J., Cheneler, D., Ward, M. & Adams, M., 2012, Particulate materials: synthesis, characterisation, processing and modelling. Wu, J. & Ge, W. (eds.). Cambridge: RSC Publishing, p. 213-218 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  63. Published

    The influence of viscoelasticity on interparticle adhesion

    Bowen, J., Cheneler, D., Ward, M., Adams, M. & Zhang, Z., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  64. Published

    The influence of wetting on the buoyancy of particles

    Bowen, J., Cheneler, D., Ward, M. & Adams, M., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  65. Published

    Direct e-beam lithography of PDMS

    Bowen, J., Cheneler, D. & Robinson, A., 2011.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  66. Published

    Optimisation of nanoscale surface topography analysis

    Bowen, J. & Cheneler, D., 2012.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  67. Published

    On the origin and magnitude of surface stresses due to metal nanofilms

    Bowen, J. & Cheneler, D., 21/02/2016, In: Nanoscale. 8, 7, p. 4245-4251 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  68. Published

    Selecting suitable image dimensions for scanning probe microscopy

    Bowen, J. & Cheneler, D., 12/2017, In: Surfaces and Interfaces. 9, p. 133-142 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  69. Published

    The stability and degradation of PECVD fluoropolymer nanofilms

    Bowen, J. & Cheneler, D., 02/2019, In: Polymer Degradation and Stability. 160, p. 203-209 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  70. Published

    Closed-Form Expressions for Contact Angle Hysteresis: Capillary Bridges between Parallel Platens

    Bowen, J. & Cheneler, D., 5/03/2020, In: Colloids and Interfaces. 4, 1, 17 p., 13.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  71. Published

    Manufacture and calibration of high stiffness AFM cantilevers

    Bowen, J., Cheneler, D. & Vicary, J., 4/11/2020.

    Research output: Contribution to conference - Without ISBN/ISSN Poster

  72. Published

    MXenes as Support for Electrocatalysts towards Oxygen Reduction Reaction in Alkaline Media

    Bouscarrat, L., 2023, Lancaster University. 142 p.

    Research output: ThesisDoctoral Thesis

  73. Published

    LIGA-based Slow Wave Structure for a THz Vacuum Amplifier

    Bouamrane, F., Bouvet, T., Megtert, S., Brunetti, F., Mineo, M., Paoloni, C., Tamburri, E., Terranova, M. L., Ulisse, G., Di Carlo, A., Marchesin, R., Pham, K., Durand, A. J., Kotiranta, M., Krozer, V., Guiset, P., De Rossi, A., Schnell, J. P., Legagneux, P. & Dolfi, D. & 6 others, Fiorello, A. M., Dispenza, M., Secchi, A., Zhurbenko, V., Gohier, A. & Cojocaru, C.-S., 06/2011, Proceedings of High Aspect Ratio Micro Structure Conference HARMST 2011. Taiwan, 1 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  74. Published

    LIGA-based Slow Wave Structure for a THz Vacuum Amplifier

    Bouamrane, F., Di Carlo, A., Durand, A. J., Kotiranta, M., Krozer, V., Zhurbenko, V., Mineo, M. & Paoloni, C., 2013. 2 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  75. Published

    Bioloistic delivery of Ca2+ dyes into plant and algal cells.

    Bothwell, J. H. F., Brownlee, C., Hetherington, A. M., Ng, C. K.-Y., Wheeler, G. L. & McAinsh, M., 04/2006, In: Plant Journal. 46, 2, p. 327-335 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  76. Published

    A microstructure-based model for describing the material properties of Al-Zn alloys during high pressure torsion

    Borodachenkova, M., Barlat, F., Wen, W., Bastos, A. & Grácio, J. J., 2015, In: International Journal of Plasticity. 68, p. 150-163 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  77. Published

    Modeling of the mechanical behavior and texture evolution in Zn alloys during reverse shear loading

    Borodachenkova, M., Wen, W., Barlat, F., Pereira, A. & Grácio, J., 2015, In: Journal of Materials Processing Technology. 224, p. 143-148 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  78. Published

    Numerical simulation of the mechanical response during strain path change: Application to Zn alloys

    Borodachenkova, M., Wen, W., Barlat, F., Pereira, A. & Grácio, J., 2014, In: Procedia Engineering. 81, p. 1300-1305 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  79. Published

    Excitation and trapping of lower hybrid waves in striations

    Borisov, N. & Honary, F., 3/12/2008, In: Physics of Plasmas. 15, 12, 11 p., 122901.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  80. Published

    Trapping of lower hybrid waves in elongated plasma depletions in the earth's ionosphere

    Borisov, N. & Honary, F., 31/03/2008, In: Physics Letters A. 372, 14, p. 2440-2445 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  81. Published

    Stationary state and relaxation of artificial irregularities excited in ionospheric heating experiments

    Borisov, N., Senior, A. & Honary, F., 05/2005, In: Journal of Plasma Physics. 71, 3, p. 315-334 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  82. Published

    Process design of continuous biodiesel production by reactive distillation: comparison between homogeneous and heterogeneous catalysts

    Boon-anuwat, N.-N., Kiatkittipong , W., Aiouache, F. & Assabumrungrat, S., 06/2015, In: Chemical Engineering and Processing: Process Intensification. 92 , p. 33-44 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  83. Published

    Phosphatidylinositol 4,5-bisphosphate specific phospholipase C in Pharbitis nil membranes.

    Bonner, P. L. R., Prior, S., Hetherington, A. M. & Lumsden, P. J., 1992, In: Biologia Plantarum. 34, 5-6, p. 367-372 6 p.

    Research output: Contribution to Journal/MagazineJournal article

  84. Published

    A BIOMECHANICAL COMPARISON OF DIFFERENT SCREW CONFIGURATIONS IN DISTAL TIBIAL LOCKING PLATES

    Bonner, T. J., Green, S. M. & McMurty, I. A., 1/04/2012, In: Journal of Bone and Joint Surgery, British Volume. 94-B, SUPP XXXV, p. 20 1 p.

    Research output: Contribution to Journal/MagazineMeeting abstractpeer-review

  85. Published

    A parallel 3D unstructured implicit RANS solver for compressible and incompressible CFD simulations

    Bonfiglioli, A., Campobasso, S., Carpentieri, B. & bollhoefer, M., 2012, Parallel Processing and Applied Mathematics: 9th International Conference, PPAM 2011, Torun, Poland, September 11-14, 2011. Revised Selected Papers, Part II. Wyrzykowski, R., Dongarra, J., Karczewski, K. & Waśniewski , J. (eds.). Berlin: Springer, p. 312-322 11 p. (Lecture Notes in Computer Science; vol. 7203).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  86. Published

    Method for deposition of ceramic films

    Bone, A. (Inventor), Dawson, R. (Inventor) & Leah, R. (Inventor), 23/07/2009, IPC No. C04B41/87; C04B41/89; C23C18/12; H01M8/12, Patent No. WO2009090419 (A2)

    Research output: Patent

  87. Published

    METHOD FOR PREPARING SOFC ELECTROLYTE

    Bone, A. (Inventor), Leah, R. (Inventor) & Dawson, R. J. (Inventor), 30/09/2015, Patent No. EA021907 (B1), 30/08/2011, Priority date 13/06/2008, Priority No. EA20110070017 20090430

    Research output: Patent

  88. Published

    Distribution ratios of lipase-catalyzed reaction products in ionic liquid supercritical CO2 systems: resolution of 2-octanol enantiomers

    Bogel-Lukasik, R., Najdanovic, V., Barreiros, S. & da Ponte, M. N., 2/07/2008, In: Industrial and Engineering Chemistry Research. 47, 13, p. 4473-4480 8 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  89. Published

    Hydrogenation of CO(2)-Expanded Liquid Terpenes: Phase Equilibrium-Controlled Kinetics

    Bogel-Lukasik, E., Serbanovic, A., Bogel-Lukasik, R., Banet-Osuna, A., Najdanovic-Visak, V. & da Ponte, M. N., 2009, Gas-expanded liquids and near-critcial media : green chemistry and engineering. Hutchenson, K. W., Scurto, A. M. & Subramaniam, B. (eds.). Washington, D.C.: American Chemical Society, p. 191-201 11 p. (ACS Symposium Series; vol. 1006).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  90. Published

    I&EC 90-Hydrogenation of CO2-expanded liquid terpenes: Phase equilibrium-controlled kinetics

    Bogel-Lukasik, E., Serbanovic, A., Bogel-Lukasik, R., Banet-Osuna, A., Najdanovic-Visak, V. & da Ponte, M. N., 19/08/2007, In: Abstracts of Papers of the American Chemical Society. 234, 1 p.

    Research output: Contribution to Journal/MagazineMeeting abstractpeer-review

  91. Published

    Beam dynamics driven design of powerful energy recovery linac for experiments

    Bogacz, A., Apsimon, R., Brüning, O., André, K., Holzer, B. J., Hounsell, B., Klein, M., Militsyn, B., Williams, P., Perez Segurana, G., Bailey, I., Setiniyaz, S., Abukeshek, R., Barbagallo, C., Ben Abdillah, M., Bruni, C., Duchesne , P., Duthil , P., Fomin , A. & Guyot, C. & 12 others, Kaabi , W., Michaud, J., Olry , G., Perrot , L., Reynet, D., Roux, R., Stocchi, A., Wurth , S., Abualrob, H., Baylac, M., Bouly, F. & Jacquot, B., 26/03/2024, In: Physical Review Accelerators and Beams. 27, 3, 15 p., 031603.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  92. Published

    Rapid production of microwave packaging in Silicon Aluminium by thin-shell electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A. E. W., 01/2002, In: Microelectronics International. 19, 1, p. 30-32 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  93. Published

    Rapid design, prototyping and manufacture: proceedings of the seventh national conference on

    Bocking, C. E. (Editor), Rennie, A. E. W. (Editor) & Jacobson, D. M. J. (Editor), 2006, MJA Print. 134 p.

    Research output: Book/Report/ProceedingsBook

  94. Published

    Rapid and virtual prototyping and applications: Proceedings of the Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports

    Bocking, C. E. (Editor), Rennie, A. (Editor) & Jacobson, D. M. (Editor), 2003, Professional Engineering Publishing. 330 p.

    Research output: Book/Report/ProceedingsBook

  95. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  96. Published

    Electroforming of a Thermojet Master Pattern for use as an Electro-Discharge Machine Electrode

    Bocking, C., Rennie, A., Bennett, G. & Lewis, N., 10/2000, Time Compression Technologies 2000 Conference: Proceedings of. Rapid News Publications PLC, p. 151-156 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  97. Published

    An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

    Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  98. Published

    Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  99. Published

    The Fabrication of MMC Electronic Packages using Thin Shell Electroformed (TSE) EDM Electrodes

    Bocking, C., Jacobson, D. M., Rennie, A. & Bennett, G., 10/2001. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  100. Published

    Rapid Design, Prototyping and Manufacturing: Proceedings of the Thirteenth Conference on

    Bocking, C. E. (Editor) & Rennie, A. (Editor), 06/2012, High Wycombe: CRDM Ltd. 109 p.

    Research output: Book/Report/ProceedingsProceedings

Back to top