School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

5501 - 5600 out of 6,516Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Publication date

2004
Published
Robustness comparison of control systems for a nuclear power plant.
Ding, L., Bradshaw, A. & Taylor, C. J., 2004, Proceedings of the UKACC international conference on control.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Second international symposium centrifugal pumps : the state of the art and new developments / organized by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE).
Aggidis, G. A., 2004, London: Professional Engineering Publishing. 187 p. (IMechE event publications)
Research output: Book/Report/Proceedings › Book
Published
Second International Symposium on Advanced Materials for Fluid Machinery / organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE)
Aggidis, G. A., 2004, London: Published by Professional Engineering Publishing. 145 p. (IMechE conference transactions)
Research output: Book/Report/Proceedings › Book
Published
Shear failure strength of web-flange junctions in pultruded GRP profiles.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Simple frequency counting techniques for analysis of VCO/CP-PLL coupled noise sensitivity in fully embedded CP-PLLs.
Burbidge, M. J., 2004, Proceedings of the 2nd IEE integrated circuit test conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Simulation of high energy tail of electron distribution function
Gustavsson, B., Sergienko, T., Häggström, I., Honary, F. & Aso, T., 2004, In: Advances in Polar Upper Atmosphere Research. 18, p. 1-9 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State dependent parameter proportional-integral-plus (SDP-PIP) control of a nonlinear robot digger arm.
Shaban, E. M., Taylor, C. J. & Chotai, A., 2004, Proceedings of the UKACC international conference on control. 59 ed.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Stress transfer in cross-ply laminates with transverse cracks
Ye, J. & Yang, J., 2004, Computational Mechanics: Proceedings of the Sixth World Congress on Computational Mechanics in conjunction with the Second Asian-Pacific Congress on Computational Mechanics, September 5-10, 2004, Beijing, China . Yao, Z. H., Yuan, M. W. & Zhong, W. X. (eds.). Beijing: Tsinghua University Press & Springer-Verlag
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The application of photocatalysis in transition metal and actinide redox chemistry
Boxall, C., Le Gurun, G. & Taylor, R. J., 2004, Recent Research Developments in Photochemistry and Photobiology. Trivandrum, India: Transworld Research Network, Vol. 7. p. 39-78 40 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The development of a novel scanner to measure human composition.
Peyton, A. J., Tapp, H. S., Ktistis, C., Mackin, R. O., Wan-Daud, W. A., Goss, D. & Crescenzo, E., 2004, Proceedings of the XII international conference on electrical bio-impedance.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The facts and fiction of renewable energy.
Aggidis, G. A., 2004, Proceedings of the UK energy policy conference: will the lights go out?.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
The influence of magma ocean on the lunar global stress field due to tidal interaction between the Earth and Moon.
Scott, R. S. & Wilson, L., 2004, In: Lunar and Planetary Science Conference Abstracts. XXXV(1, p. CD-ROM
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The influence of tidal, despinning, and magma ocean cooling stresses on the magnitude and orientation of the Moon's early global stress field.
Scott, R. S. & Wilson, L., 2004, In: Lunar and Planetary Science Conference Abstracts. XXXV(1, p. CD-ROM
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The monitoring of pile construction to assess integrity and load carrying capacity of CFA piles.
Rust, M., Clayton, C., Mure, N., Scott, J., Seward, D. & Quayle, S., 2004, p. 1565-1569. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.
Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Use of QCM in fluid applications: performance deterioration with cleaning and choice of surface roughness.
Dewar, R. & Joyce, M. J., 2004, Proceedings of Electrochem 2004.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Vernier hybrid machines for compact drive applications.
Spooner, E., Taverner, P. J., Mueller, M. A., Baker, N. J. & Brooking, P. R. M., 2004, In: Proceedings of the 2nd IEE international conference on power electronics, machines and drives. 1, 31, p. 452-457 6 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.
Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Vitamin D and peak bone mass in UK South Asian women
Roy, D. K., Berry, J. L., Adams, J. E., Swarbrick, C. M., King, Y., Pye, S. R., Silman, A. J. & O', N. T. W., 2004, In: Osteoporosis International. 15, Supplement 2, p. S9 1 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.
Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
What is the future for beam propagation methods?
Benson, T., Hu, B., Vukovic, A. & Sewell, P., 2004, In: Proceedings of SPIE. 5579
Research output: Contribution to Journal/Magazine › Journal article › peer-review
2003
Published
Techniques for automatic on chip closed loop transfer function monitoring for embedded charge pump phase locked loops.
Burbidge, M. J., Tijou, J. & Richardson, A. M. D., 19/12/2003, Design, Automation and Test in Europe Conference and Exhibition, 2003. p. 496-501 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Structure and optical properties of CuxO- and CuxSe-doped sol–gel silica glasses
Gurin, V. S., Alexeenko, A. A., Yumashev, K. V., Prokoshin, P. V., Zolotovskaya, S. & Zhavnerko, G. A., 15/12/2003, In: Materials Science and Engineering: C . 23, 6-8, p. 1063-1067 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Performance comparison of cross correlation and filled aperture imaging riometers
Hagfors, T., Grill, M. & Honary, F., 12/2003, In: Radio Science. 38, 6, p. 17/1-17/5
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A stochastic approach to cable dynamics with moving rivulets
Cao, D. Q., Tucker, R. W. & Wang, C., 20/11/2003, In: Journal of Sound and Vibration. 268, 2, p. 291-304 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Pressure, isotope, and water co-solvent effects in liquid-liquid equilibria of (ionic liquid plus alcohol) systems
Najdanovic-Visak, V., Esperanca, J., Rebelo, L., da Ponte, M., Guedes, H., Seddon, K. R., de Sousa, H. & Szydlowski, J., 20/11/2003, In: Journal of Physical Chemistry B. 107, 46, p. 12797-12807 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Advances of CFD in Fluid Machinery Design /organised by the Fluid Machinery Group of the Institution of Mechanical Engineers (IMechE).
Aggidis, G. A., 18/11/2003, London: IMechE Event Publications.
Research output: Book/Report/Proceedings › Book
Published
Viscosity measurement of industrial oils using the droplet quartz crystal microbalance.
Joyce, M. J., Ash, D., Barnes, C. & Jeffries, A., 1/11/2003, In: Measurement Science and Technology. 14, 11, p. 1955-1962 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Physical test data for the appraisal of design procedures for bolted joints in pultruded FRP structural shapes and systems.
Mottram, J. T. & Turvey, G. J., 10/2003, In: Progress in Structural Engineering and Materials. 5, 4, p. 195-222 28 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Development of a virtual instrument system for industrial process tomography.
Deloughry, R., Davenport, I., Ma, X. & Ponnapalli, P. V. S., 09/2003. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Image reconstruction in 3D magnetic induction tomography using a FEM forward model.
Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 09/2003. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Imaging the flow profile of molten steel through a submerged pouring nozzle.
Ma, X., Peyton, A. J., Binns, R. & Higson, S. R., 09/2003. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Proton recoil detector and the calibration thereof.
D'Mellow, B. (Inventor), Joyce, M. J. (Inventor) & D'Mellow, Bob and Joyce, Malcolm J. (Patent applicant), 09/2003, Patent No. GB2422195
Research output: Patent
Published
The role of stomata in sensing and driving environmental change.
Hetherington, A. M. & Woodward, F. I., 21/08/2003, In: Nature. 424, 6951, p. 901-908 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Suppression of multipacting in rectangular coupler waveguides.
Geng, R. L., Padamsee, H., Belomestnykh, S., Goudket, P., Dykes, D. M. & Carter, R. G., 11/08/2003, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 508, 3, p. 227-238 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Free-edge effect in cross-ply laminated hollow cylinders subjected to axisymmetric transverse loads
Ye, J. Q. & Sheng, H. Y., 08/2003, In: International Journal of Mechanical Sciences. 45, 8, p. 1309-1326 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Investigations for minimum invasion digital only built in ‘ramp’ based test techniques for charge pump PLLs.
Burbidge, M. J., Poullet, F., Tijou, J. & Richardson, A. M. D., 08/2003, In: Journal of Electronic Testing. 19, 4, p. 481-490 10 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
On the particle size and molecular weight distributions of clinical bone cements
Liu, C. Z., Green, S. M., Watkins, N. D. & McCaskie, A. W., 08/2003, In: Journal of Materials Science Letters. 22, 16, p. 1147-1150 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimal algorithms for wavelet-based denoising in PD measurement.
Zhou, C., Ma, X. & Kemp, I. J., 08/2003. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Process characteristics and effects of gas- and water-atomized stainless steel powders in laser-based rapid tooling
Pinkerton, A. J. & Li, L., 08/2003, In: Journal of Laser Applications. 15, 3, p. 172-178 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new imaging riometer based on Mills Cross technique
Grill, M., Honary, F., Nielsen, E., Hagfors, T., Dekoulis, G., Chapman, P. & Yamagishi, H., 07/2003, p. 26-31. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Other
Published
Protecting the Railways: the Management of Safety in a Fragmented Industry.
Kemp, R., 07/2003, In: Ingenia. 16, p. 35-39 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Sphingolipids, new players in plant signalling.
Worrall, D., Ng, C. K.-Y. & Hetherington, A. M., 07/2003, In: Trends in Plant Science. 8, 7, p. 317-320 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electroforming for Injection Moulding
Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of a sensor for visualisation of steel flow in the continuous casting nozzle
Higson, S. R., Drake, P., Stamp, D. W., Peyton, A. J., Binns, R., Lyons, A. & Lionheart, W. R. B., 06/2003, In: Revue de Metallurgie-Cahiers d'Informations Techniques. 2003, 6, p. 629-632 4 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Reactive distillation-pervaporation hybrid column for tert-amyl alcohol etherification with ethanol
Aiouache, F. & Goto, S., 06/2003, In: Chemical Engineering Science. 58, 12, p. 2465-2477 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
On the particle size and molecular weight distributions of clinical bone cements
Liu, C., Green, S. M., Watkins, N. D. & McCaskie, A. W., 1/05/2003, In: Journal of Materials Science Letters. 22, 9, p. 709-712 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Construction of nonlinear dynamic MEMS component models using cosserat theory.
Wang, C., Richardson, A. M. D., Liu, D., Rosing, R., Tucker, R. & De Masi, B., 05/2003, Proceedings of the SPIE design, test, integration and packaging of MEMS symposium. France: Cannes Mandelieu
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Sorption effect on kinetics of etherification of tert-amyl alcohol and ethanol
Aiouache, F. & Goto, S., 05/2003, In: Chemical Engineering Science. 58, 10, p. 2065-2077 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Supercritical carbon dioxide-induced phase changes in (ionic liquid, water and ethanol mixture) solutions: Application to biphasic catalysis.
Najdanovic-Visak, V., Serbanovic, A., Esperanca, J., Guedes, H., Rebelo, L. & da Ponte, M., 14/04/2003, In: ChemPhysChem. 4, 5, p. 520-522 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Maximizing throughput over parallel wire structures in the deep submicrometer regime.
Pamunuwa, D. B., Tenhunen, H. & Zheng, L., 1/04/2003, In: IEEE Transactions on Very Large Scale Integration (VLSI) Systems. 11, 2, p. 224-243 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR.
Elfick, A. P. D., Green, S. M., Krikler, S. & Unsworth, A., 1/04/2003, In: Journal of Biomedical Materials Research Part A. 65, 1, p. 95-108 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Crosstalk in guard cell signalling.
Worrall, D., Fletcher, S., Mills, L., McAinsh, M., Hunt, L., Gray, J. E. & Hetherington, A. M., 04/2003, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 134, Supple, p. S132
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Dynamics and structure of transitional buoyant jet diffusion flames with side-wall effects
Jiang, X. & Luo, K. H., 04/2003, In: Combustion and Flame. 133, 1-2, p. 29-45 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Observations of the spatial structure of electron precipitation pulsations using an imaging riometer
Senior, A. & Honary, F., 04/2003, In: Annales Geophysicae. 21, 4, p. 997-1003 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Phospholiphase C is required for the control of stomatal aperture by ABA.
Hunt, L., Mills, L. N., Pical, C., Leckie, C. P., Aitken, F. L., Kopka, J., Mueller-Roeber, B., McAinsh, M., Hetherington, A. M. & Gray, J. E., 04/2003, In: Plant Journal. 34, 1, p. 47-55 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish
Pinkerton, A. J. & Li, L., 15/03/2003, In: Applied Surface Science. 208-209, p. 411-416 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Evidence of near-Earth breakup location
Dubyagin, S. V., Sergeev, V. A., Carlson, C. W., Marple, S. R., Pulkkinen, T. I. & Yahnin, A. G., 03/2003, In: Geophysical Research Letters. 30, 6, p. 15-1 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Open-hole tension strength of pultruded GRP plate.
Turvey, G. & Wang, P., 1/02/2003, In: Proceedings of the ICE - Structures and Buildings. 156, 1, p. 93-101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A preliminary hip joint simulator study of the migration of a cemented femoral stem
Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 02/2003, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 217, 2, p. 127-135 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
ABA-signalling in guard cells.
Hunt, L., Gray, J. E., Mills, L. N., McAinsh, M. & Hetherington, A. M., 02/2003, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 134, 1, p. S136
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modelling noise and delay in VLSI circuits.
Pamunuwa, D. B., Elassaad, S. & Tenhunen, H., 02/2003, In: Electronics Letters. 39, 3, p. 269-271 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Strength and fracture resistance of FRP reinforced concrete flexural members
Wu, Z. J. & Ye, J. Q., 02/2003, In: Cement and Concrete Composites. 25, 2, p. 253-261 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Identification of clouds and aurorae in optical data images
Seviour, R., Kosch, M. & Honary, F., 17/01/2003, In: New Journal of Physics. 5, p. 6.1-6.7
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A simple model for studying the beam-wave interaction in the output gap of a klystron
Carter, R. G. & Feng, J., 1/01/2003, 4th IEEE International Vacuum Electronics Conference, IVEC 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 265-267 3 p. 1286297. (4th IEEE International Vacuum Electronics Conference, IVEC 2003 - Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper
Published
DOES THE CLINICAL ENVIRONMENT INFLUENCE THE PROPERTIES OF BONE CEMENT?
Burt, N., Green, S. M., Sandher, D. S. & Gregg, P. J., 1/01/2003, In: Journal of Bone and Joint Surgery, British Volume. 85-B, SUPP I, p. 13-14 2 p.
Research output: Contribution to Journal/Magazine › Meeting abstract › peer-review
Published
Klystron output cavity investigation using MAFIA
Feng, J. & Carter, R. G., 1/01/2003, 4th IEEE International Vacuum Electronics Conference, IVEC 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 96-97 2 p. 1286091. (4th IEEE International Vacuum Electronics Conference, IVEC 2003 - Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper
Published
Modeling of a multistage collector for a high efficiency space TWT
Ghosh, T. K., Carter, R. G., Bera, A., Srivastava, V. & Joshi, S. N., 1/01/2003, 4th IEEE International Vacuum Electronics Conference, IVEC 2003 - Proceedings. Institute of Electrical and Electronics Engineers Inc., p. 112-113 2 p. 1286101. (4th IEEE International Vacuum Electronics Conference, IVEC 2003 - Proceedings).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A 3D imaging system for measuring the shape and volume of the human body.
Wan-Daud, W. A., Tapp, H. S., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 358-363 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A combined digital camera – EMT system to measure human body composition.
Tapp, H. S., Goss, D., Mackin, R. O., Crescenzo, E., Wan-Daud, W. A., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 384-390 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A global wire planning scheme for Network-on-Chip.
Liu, J., Zheng, L.-R., Pamunuwa, D. B. & Tenhunen, H., 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03.. Vol. 4. p. IV-892-IV-895
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A pharmacological and mutagenic approach to dissecting the response of Arabidopsis thaliana to ozone.
North, K., Evans, N. H., Hetherington, A. M., McAinsh, M. & Knight, M. R., 2003, In: Comparative Biochemistry and Physiology - Part A: Molecular and Integrative Physiology. 134, Supple, p. S137
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A three-dimensional state space finite element solution for laminated composite cylindrical shells
Sheng, H. Y. & Ye, J. Q., 2003, In: Computer Methods in Applied Mechanics and Engineering. 192, 22-24, p. 2441-2459 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Addressing the difficulties in using inductive methods to evaluating human body composition.
Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, In: Biométrie Humaine et Anthropologie. 21, p. 69-77 9 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Addressing the difficulties in using inductive methods to evaluating human body composition.
Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, Proceedings of the international conference on robotics, vision, information and signal processing (ROVISP 2003).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An intuitive visual aid to the design and analysis of controller transformations.
Winsby, A. J., Burge, S., Grout, I. & Widden, M. B., 2003, Proceedings of the educational ECAD user group.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
An investigation of the effect of pulse frequency in laser multiple-layer cladding of stainless steel
Pinkerton, A. J. & Li, L., 2003, In: Applied Surface Science. 208-209, p. 405-410 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Analytic modeling of interconnects for deep submicron circuits.
Pamunuwa, D. B., Elassaad, S. & Tenhunen, H., 2003, 2003 International Conference on Computer-Aided Design (ICCAD'03). San Jose, California: IEEE Computer Society, p. 835-842 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Annular sector plates: comparison of full-section and layer yield predictions.
Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Characteristic comparison of control systems for a nuclear power plant.
Bradshaw, A., Ding, L. & Taylor, C. J., 2003, Proceedings of the international conference on agile manufacturing (ICAM2003). p. 4-6 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Closed form metrics to accurately model the response in general arbitrarily-coupled RC trees.
Pamunuwa, D. B. & Elassaad, S., 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03.. IEEE, Vol. 4. p. IV-604
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Combined finite strip and beam elements for double tee slabs
Abou Ghadeer, M., Ye, J. & Mansouri, A. H., 2003, Proceedings of the Ninth International Conference on Civil and Structural Engineering Computing: Egmond-aan-Zee, the Netherlands, 2-4 September 2003 . Topping, B. H. V. (ed.). Stirling: Civil-Comp Press
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Criteria for the selection of a software development environment for construction robotic systems.
Seward, D. W. & Zied, K., 2003, Proceedings of the 20th international symposium on automation and robotics in construction. p. 407-412 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Depth profile scanning of cylindrical bar and wire using a spectroscopic direct current injection technique.
Dickinson, S. J., Binns, R., Peyton, A. J. & Yin, W., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 39-44 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of a linear array for intracavatary in vivo dosimetry during external beam radiotherapy and brachytherapy.
Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2003, Proceedings of the nuclear science symposium, medical imaging conference: 13th international workshop on room temperature semiconductor X- and gamma-ray detectors.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of an eddy current system for monitoring taphole operations.
Coveney, J. A., Peyton, A. J., Kyllo, A. K., Pham, M. H. & Gray, N. B., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 377-383 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Development of electromagnetic inductance tomography (EMT) hardware for determining human body composition.
Goss, D., Mackin, R. O., Crescenzo, E., Tapp, H. S. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 828-833 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Direct metal deposition by diode laser: modelling the effect of increased beam coupling
Pinkerton, A. J. & Li, L., 2003, Proceedings of the 22nd International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
ECR deposition of hydrogenated diamond-like amorphous carbon films using acetylene-oxygen plasmas
Adamopoulos, G., Godet, C., Drévillon, B., Saito, Y., Batchelder, D. N., Grosman, A. & Ortega, C., 2003, In: Diamond and Related Materials. 12, 3-7, p. 983-987 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of powder geometry and composition in coaxial laser deposition of 316L steel for rapid prototyping
Pinkerton, A. J. & Li, L., 2003, In: CIRP Annals - Manufacturing Technology. 52, 1, p. 181-184 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Electromagnetic imaging and tomography – a review of recent advances.
Peyton, A. J., Dickinson, S. J., Lionheart, W. R. B., Soleimani, M. & Pritchard, W. D. N., 2003, Proceedings of the institute of materials conference on on-line measurements for quality in the metals industry.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Enhanced support for sounding rockets at Andøya rocket range - present status and future for the ALOMAR instrumentation
Bekkelund, K., Gausa, M., Latteck, R., Marple, S. & Warmbein, B. (Editor), 2003, p. 233-234. 2 p.
Research output: Contribution to conference - Without ISBN/ISSN › Other › peer-review
Published
Evaluation and detection of deterministic jitter causes in CP-PLLs due to macro level faults and pre-detection using simple methods.
Burbidge, M. J., Lechner, A. & Richardson, A. M. D., 2003, In: Proceedings of the 9th IEEE international mixed signal test workshop (IMSTW03). p. 157-164 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
High linearity broad-band helix TWTs
Jenkins, R. O., 2003, Lancaster University. 220 p.
Research output: Thesis › Doctoral Thesis
Published
High-latitude observations of impulse-driven ULF pulsations in the ionosphere and on the ground
Menk, F. W., Yeoman, T. K., Wright, D. M., Lester, M. & Honary, F., 2003, In: Annales Geophysicae. 21, 2, p. 559-576 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Implementation of a combined fan and valve control design in a ventilation chamber.
Leigh, P., Taylor, C. J., Chotai, A., Young, P. C. & Vranken, E., 2003, Proceedings of the 16th international conference on systems engineering (ICSE2003). p. 423-428 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Interactions between strip and beam elements of a hollow block slab system
Abou Ghadeer, M., Ye, J. Q. & Mansouri, A. H., 2003, Computational Fluid and Solid Mechanics 2003, Vols 1 and 2, Proceedings. Bathe, K. J. (ed.). Amsterdam: ELSEVIER SCIENCE PUBL B V, p. 42-46 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Investigations into testability improvements on a 16 bit audio sigma-delta ADC through the use of on-chip techniques.
De Venuto, D., Compagne, E. & Richardson, A. M. D., 2003, Proceedings of IMSTW 2003.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesizers.
Burbidge, M. J., Tijou, J. & Richardson, A. M. D., 2003, In: Journal of Electronic Testing.
Research output: Contribution to Journal/Magazine › Journal article
Published
Laminated composite plates and shells: 3D modelling
Ye, J., 2003, London: Springer-Verlag. 273 p.
Research output: Book/Report/Proceedings › Book

Previous 1...52 53 54 55 56 57 58 59 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us