Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Published
  2. Unpublished

    Report of quality of service think tank, UKERNA QoS think tank report

    Edwards, C., Butler, J., Chown, T., Cooper, C., Couzens, J., Jeffreys, P., Price, D., Samani, R., Sharp, J. & Tasker, R., 07/2001, (Unpublished).

    Research output: Working paper

  3. Published

    Representation of coupled-cavity slow-wave structures by equivalent-circuits.

    Carter, R. G., 1983, In: IEE Proceedings I (Communications, Speech and Vision). 130, 2, p. 67-72 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  4. Published

    Reproducible bubble-induced acoustic microstreaming for bead disaggregation and immunoassay in microfluidics

    Chen, H., Gao, Y., Petkovic, K., Yang, S., Best, M., Du, Y. & Zhu, Y., 14/02/2017, In: Microfluidics and Nanofluidics. 21, 30.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  5. Published

    Repurposing of metal support structures to form powder for use in additive manufacturing

    Powell, D., Rennie, A., Molyneux, A., Burns, N. & Geekie, L., 5/04/2019, 16th Rapid Design, Prototyping & Manufacturing Conference (RDPM2019): Proceedings of the. Rennie, A., Pei, E. & Hackney, P. (eds.). 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  6. Published

    Requirements for large-scale adoption of rapid manufacturing technologies

    Hasan, S., Rennie, A., Hoque, M. R. & Ahmed, N., 24/05/2019, In: Cogent Business & Management. 6, 1, 22 p., 1623151.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  7. Published

    Research and teaching using a hydraulically-actuated nuclear decommissioning robot

    West, C., Burrell, T., Montazeri, A., Monk, S. D. & Taylor, C. J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  8. Published

    Research on concrete early shrinkage characteristics based on machine learning algorithms for multi-objective optimization

    Wang, J., Liu, H., Sun, J., Huang, B., Wang, Y., Zhao, H., Saafi, M. & Wang, X., 15/07/2024, In: Journal of Building Engineering. 89, 109415.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  9. Published

    Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions

    Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  10. Published

    Research on wave energy converters and mooring systems in the United Kingdom.

    Aggidis, G. A. & Huang, M., 2006, In: Water Resources and Power Journal (in Chinese). 24, 4, p. 37-40 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  11. Published

    Research on weld formation mechanism of laser-MIG arc hybrid welding with butt gap

    Huang, H., Zhang, P., Yan, H., Liu, Z., Yu, Z., Wu, D., Shi, H. & Tian, Y., 1/01/2021, In: Optics and Laser Technology. 133, 13 p., 106530.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  12. Published

    Research Progress of Metal Additive Manufacturing Technology and Application in Space: A Review

    Su, X., Zhang, P. & Huang, Y., 1/12/2024, In: Metals. 14, 12, 1373.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  13. Published

    Research progress on selective laser melting (SLM) of bulk metallic glasses (BMGs): a review

    Zhang, P., Tan, J., Tian, Y., Yan, H. & Yu, Z., 28/02/2022, In: International Journal of Advanced Manufacturing Technology. 118, 7-8, p. 2017-2057 41 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  14. Published

    Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform

    Lupeanu, M., Rennie, A., Rosu, M.-M. & Moagar-Poladian, G., 04/2014, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162 20 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  15. Unpublished

    Researching the impact of wind patterns in urban areas for bladeless wind turbine implementation.

    Faro, A., 2024, (Unpublished) Lancaster University. 97 p.

    Research output: ThesisMaster's Thesis

  16. Published

    Residual properties of ultra-high performance concrete containing steel-polypropylene hybrid fiber exposed to elevated temperature at early age

    Wang, T., Yu, M., Tian, J., Sun, Z., Yu, C. & Ye, J., 1/04/2025, In: Journal of Building Engineering. 99, 111507.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  17. Published

    Residual stresses in laser direct metal deposited Waspaloy

    Moat, R. J., Pinkerton, A. J., Li, L., Withers, P. J. & Preuss, M., 15/03/2011, In: Materials Science and Engineering: A. 528, 6, p. 2288-2298 11 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  18. Published

    Resilient communication for smart grid ubiquitous sensor network: state of the art and prospects for next generation

    Tsado, Y., Lund, D. & Gamage, K., 2015, In: Computer Communications. 16 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  19. Published

    Resilient Event-Triggered Terminal Sliding Mode Control Design for a Robot Manipulator

    Saeedi, M., Zarei, J., Saif, M., Shanahan, D. & Montazeri, A., 31/01/2025, In: IEEE Transactions on Automation Science and Engineering. 22, 1, p. 570-581 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  20. Published

    Resilient wireless communication networking for smart grid BAN

    Tsado, Y., Lund, D. & Gamage, K., 2014, IEEE International Energy Conference (ENERGYCON-2014). Piscataway, N.J.: IEEE, p. 846-851 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  21. Published

    Resolution of the ATLAS muon spectrometer monitored drift tubes in LHC Run 2

    Collaboration, A., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M. & Whitmore, B. W., 1/09/2019, In: Journal of Instrumentation. 14, 9, 36 p., P09011.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  22. Published

    Resolving and modeling the effects of Fe and Mn redox cycling on trace metal behaviour in a seasonally anoxic lake.

    Hamilton-Taylor, J., Smith, E. J., Davison, W. & Sugiyama, M., 15/04/2005, In: Geochimica et Cosmochimica Acta. 69, 8, p. 1947-1960 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  23. Published

    Resolving the internal and basal geometry of ice masses using imaging phase-sensitive radar

    Young, T. J., Schroeder, D. M., Christoffersen, P., Lok, L. B., Nicholls, K. W., Brennan, P. V., Doyle, S. H., Hubbard, B. & Hubbard, A., 1/08/2018, In: Journal of Glaciology. 64, 246, p. 649-660 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  24. Published

    Resonance Impedance Shaping Control of Hip Robotic Exoskeleton

    Xue, T., Zhang, M., Yin, J., Zhang, M., Bai, O., Wang, Z. & Zhang, T., 6/01/2022, 2021 IEEE International Conference on Systems, Man, and Cybernetics (SMC). IEEE, p. 888-893 6 p. (Conference Proceedings - IEEE International Conference on Systems, Man and Cybernetics).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  25. Published

    Resource management in microreactors - a computational study

    Quane, N., Moore, B. & Cheneler, D., 3/07/2019.

    Research output: Contribution to conference - Without ISBN/ISSN Posterpeer-review

  26. Published

    Resourceful solutions for hydro in the UK.

    Aggidis, G., 17/08/2006, In: International Water Power and Dam Construction. 58, 9, p. 24-26 3 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  27. Published

    Response and Power Absorption Assessment of the TALOS Wave Energy Converter in Time Domain

    Michaelides, C., Loukogeorgaki, E., Sheng, W. & Aggidis, G., 6/03/2024, In: International Journal of Offshore and Polar Engineering . 34, 1, p. 29-36 7 p., 34.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  28. Published

    Response Surface Optimisation of Carbon Dioxide Adsorption Onto Palm Shell Activated Carbon Functionalised With Natural Amino Acids

    Mohamed Hatta, N. S., Hussin, F., Gew, L. T. & Aroua, M. K., 28/02/2025, In: Greenhouse Gases: Science and Technology. 15, 1, p. 36-52 17 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  29. Published

    Restrained creep of CMW2000 Bone Cement

    Green, S., Liu, C., Watkins, N. D., McCaskie, A. W. & Gregg, P. J., 2002, p. T84. 0 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  30. Published

    Re-using IEEE1149.4 as an infrastructure for online monitoring.

    Jeffrey, C., Lechner, A. & Richardson, A. M. D., 2003, Proceedings of the 9th IEEE international mixed signal test workshop (IMSTW03). p. 247-249 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  31. Published

    Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products

    Celik, H. K., Rennie, A. E. W. & Akinci, I., 03/2017, In: Journal of Food Measurement and Characterization. 11, 1, p. 75-84 10 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  32. Published

    Reverse engineering of obsolete components for realisation using additive manufacturing

    McAlister, C., 2015, Lancaster University. 167 p.

    Research output: ThesisMaster's Thesis

  33. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 1/03/2015, In: Journal of Computing and Information Science in Engineering. 15, 1, 7 p., 011006.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  34. Published

    Reverse engineering using close range photogrammetry for additive manufactured reproduction of Egyptian artefacts and other objets d'art

    Kaufman, J., Rennie, A. & Clement, M., 06/2014, Proceedings of the ASME 2014 12th Biennial Conference on Engineering System Design and Analysis (ESDA 2014): Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications. American Society of Mechanical Engineers (ASME), 8 p. ESDA2014-20304

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  35. Published

    Reversible Trapping of Colloids in Microgrooved Channels via Diffusiophoresis under Steady-State Solute Gradients

    Singh, N., Vladisavljević, G. T., Nadal, F., Cottin-Bizonne, C., Pirat, C. & Bolognesi, G., 11/12/2020, In: Physical review letters. 125, 24, 248002.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  36. Published

    Review and Evaluation of the Spontaneous Fission Half-lives of 238Pu, 240Pu, and 242Pu and the Corresponding Specific Fission Rates

    Croft, S. & Favalli, A., 31/07/2021, In: Nuclear Data Sheets. 175, p. 269-287 19 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  37. Published

    Review and state of the art of regenerative liquid ring pumps

    Karlsen-Davies, N.-H. & Aggidis, G., 2014, 12th European Fluid Machinery Congress: Caledonian Hotel, Edinburgh, Scotland, 6-7 October 2014. Amsterdam: Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  38. Published

    Review and state of the art of wave energy and wave energy converters, IMechE, Fluid Machinery for Developing Engineers, Cranfield, (Invited Paper).

    Thomas, A., Aggidis, G. A. & Institution of Mechanical Engineers, G. B. (Editor), 2007, In: IMechE Conference Transactions. v. 1

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  39. Published

    Review of autonomous navigation for indoor aerial robots within a nuclear decommissioning context

    Burrell, T., Montazeri, A., Monk, S. D. & Taylor, C. J., 2015.

    Research output: Contribution to conference - Without ISBN/ISSN Abstractpeer-review

  40. Published
  41. Published

    Review of Composite Marine Risers for Deep-Water Applications: Design, Development and Mechanics

    Amaechi, C. V., Chesterton, C., Butler, H. O., Gillet, N., Wang, C., Ja’e, I. A., Reda, A. & Odijie, A. C., 17/03/2022, In: Journal of Composites Science. 6, 3, 50 p., e96.

    Research output: Contribution to Journal/MagazineReview articlepeer-review

  42. Published

    Review of leakage detection in water distribution networks

    Negm, A., Ma, X. & Aggidis, G., 1/01/2023, In: IOP Conference Series: Earth and Environmental Science. 1136, 1, 15 p., 012052.

    Research output: Contribution to Journal/MagazineReview articlepeer-review

  43. Published

    Review of Smart City Energy Modeling in Southeast Asia

    Shafiullah, M., Rahman, S., Imteyaz, B., Aroua, M. K., Hossain, M. I. & Rahman, S. M., 26/12/2022, In: Smart Cities. 6, 1, p. 72-99 28 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  44. Published

    Review of terahertz pulsed imaging for pharmaceutical film coating analysis

    Alves-Lima, D., Song, J., Li, X., Portieri, A., Shen, Y., Zeitler, J. A. & Lin, H., 6/03/2020, In: Sensors. 20, 5, 16 p., 1441.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  45. Published

    Review of tests on bolted joints between pultruded GRP profiles.

    Turvey, G. J. & Cooper, C., 2004, In: Proceedings of the Institute of Civil Engineers Civil Engineering. 157, 3, p. 211-233 23 p.

    Research output: Contribution to Journal/MagazineJournal article

  46. Published

    Review of THz near-field methods

    Lin, H., Fischer, B. M., Mickan, S. P. & Abbott, D., 2007, Proceedings of SPIE: Smart Structures, Devices, and Systems III. Al-Sarawi, S. F. (ed.). SPIE, Vol. 6414. 8 p. 64140L. (Proceedings of SPIE; vol. 6414).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  47. Published

    Review of UK energy policy - transport.

    Kemp, R., 2006, Proceedings of the IET Conference. IET Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  48. Published

    Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges

    Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F. & Rennie, A., 27/12/2021, In: Journal of Manufacturing and Materials Processing. 6, 1, 32 p., 4.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  49. Published

    Review on Fixed and Floating Offshore Structures. Part I: Types of Platforms with Some Applications

    Amaechi, C. V., Reda, A., Butler, H. O., Ja'e, I. A. & An, C., 5/08/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 8, 56 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  50. Published

    Review on Fixed and Floating Offshore Structures. Part II: Sustainable Design Approaches and Project Management

    Amaechi, C. V., Reda, A., Butler, H. O., Ja’e, I. A. & An, C., 15/07/2022, In: Journal of Marine Science and Engineering (JMSE). 10, 7, p. e973 973.

    Research output: Contribution to Journal/MagazineReview articlepeer-review

  51. Published

    Review on the design and mechanics of bonded marine hoses for Catenary Anchor Leg Mooring (CALM) buoys

    Amaechi, C. V., Chesterton, C., Butler, H. O., Wang, F. & Ye, J., 15/12/2021, In: Ocean Engineering. 242, 32 p., 110062.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  52. Published

    Revolutionising energy storage: The Latest Breakthrough in liquid organic hydrogen carriers

    Lin, A. & Bagnato, G., 18/04/2024, In: International Journal of Hydrogen Energy. 63, p. 315-329 15 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  53. Published

    RF Characterisation of Bulk Niobium and Thin Film Coated Planar Samples at 7.8 GHz

    Seal, D., Malyshev, O. B., Valizadeh, R., Sian, T., Marks, H., Hryhorenko, O., Longuevergne, D., Pira, C., Chyhyrynets, E., Marshall, E. & Burt, G., 16/09/2022, LINAC 2022 - International Linear Accelerator Conference, Proceedings. JACoW Publishing, p. 819-822 4 p. (Proceedings - Linear Accelerator Conference, LINAC).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  54. Published

    RF heating in a strong auroral electrojet

    Robinson, T. R., Bond, G., Eglitis, P., Honary, F. & Rietveld, M. T., 1998, In: Advances in Space Research. 21, 5, p. 689-692 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  55. Published

    RF power generation

    Carter, R. G., 1/12/2011, CAS 2010 - CERN Accelerator School: RF for Accelerators, Proceedings. CERN, p. 173-207 35 p. (CAS 2010 - CERN Accelerator School: RF for Accelerators, Proceedings).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  56. Published

    RF surface resistance study of non-evaporable Getter coatings

    Malyshev, O. B., Gurran, L., Goudket, P., Marinov, K., Wilde, S., Valizadeh, R. & Burt, G. C., 1/02/2017, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 844, p. 99-107 9 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  57. Published

    RF Systems

    Calaga, R., Baudrenghien, P., Burt, G., Capatina, O., Jensen, E., Montesinos, E. & Ratti, A., 29/02/2024, The High Luminosity Large Hadron Collider: New Machine for Illuminating the Mysteries of the Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, p. 199-224 26 p. (Advanced Series on Directions in High Energy Physics).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  58. Published

    RFID and NFC on Mobile Phones.

    Coulton, P., Rashid, O. & Edwards, R., 03/2008, RFID Handbook: Applications, Technology, Security and Privacy. Ahson, S. & Ilyas, M. (eds.). CRC Press, p. 375-391 17 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  59. Published

    rGO coated cotton fabric and thermoelectric module arrays for efficient solar desalination and electricity generation

    Saleque, A. M., Thakur, A. K., Saidur, R., Hossain, M. I., Qarony, W., Ahamed, M. S., Lynch, I., Ma, Y. & Tsang, Y. H., 7/01/2024, In: Journal of Materials Chemistry A. 12, 1, p. 405-418 14 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  60. Published

    Ride dynamic analyses of different concept car suspension system layouts

    Cao, D., Khajepour, A., Zhu, J. & Yin, Z., 2009, p. SAE 2009-01-0360.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  61. Published

    Ride dynamic evaluations and design optimisation of a torsio-elastic off-road vehicle suspension

    Pazooki, A., Cao, D., Rakheja, S. & Boileau, P.-E., 2011, In: Vehicle System Dynamics. 49, 9, p. 1455-1476 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  62. Published

    RLL/FEC design based on generalised array codes.

    Honary, B., Markarian, G. S. & Naderi, M., 1994, Communications theory and applications II. p. 94-107 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  63. Published

    RLL/FEC design based on generalised array codes.

    Honary, B. & Markarian, G. S., 1993, Proceedings of the 2nd international symposium on communication theory and applications. Ambleside, p. 227-228 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  64. Published

    Robo Sapiens: a personal assistant robot.

    Bradshaw, A., Seward, D. W. & Nagy, F. N., 1994, Mechatronics - the basis for a new industrial development. Acar, M., Makra, J. & Penney, E. (eds.). Southampton: Computational Mechanics Publications, p. 159-164 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  65. Published

    Robot excavator.

    Seward, D. W., 1992, IEE computing and control colloquium on telerobotically controlled mobil vehicles. London, p. 5/1-5/3

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  66. Unpublished

    Robot Husbandry

    Collins, S. & Rooksby, J., 11/2004, (Unpublished)

    Research output: Other contribution

  67. Published

    Robotics and Artificial Intelligence in the Nuclear Industry: From Teleoperation to Cyber Physical Systems

    Shanahan, D., Wang, Z. & Montazeri, A., 31/03/2023, Artificial intelligence for Robotics and Autonomous Systems. Cham: Springer Nature, 43 p. (Studies in Computational Intelligence).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  68. Published

    Robots in construction.

    Seward, D. W., 1992, In: Industrial Robot: An International Journal. 19, 3, p. 25-29 5 p.

    Research output: Contribution to Journal/MagazineJournal article

  69. Published

    Robust aerodynamic design optimization of horizontal axis wind turbines

    Caboni, M., Minisci, E. & Campobasso, S., 2015, Advances in evolutionary and deterministic methods for design, optimization and control in engineering and sciences. Greiner, D., Galván, B., Periaux, J., Gauger, N., Giannakoglou, K. & Winter, G. (eds.). Springer, p. 225-240 16 p. (Computational Methods in Applied Sciences; vol. 36).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  70. Published

    Robust and adaptive anticoagulant control

    Avery, P., Clairon, Q., Henderson, R., Taylor, C. J. & Wilson, E., 1/06/2020, In: Journal of the Royal Statistical Society: Series C (Applied Statistics). 69, 3, p. 503-524 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  71. Published

    Robust compression technique for raster document transmission.

    Chippendale, P., Arthur, P., Maundrell, M. & Honary, B., 1994, Proceedings of the third UK/Australian international symposium on DSP for communications systems. Warwick, p. 93-95 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  72. Published

    Robust Compression Techniques of Raster Documents over HF Channels

    Chippendale, P., Arthur, P., Maundrell, M. & Honary, B., 1994, Extended Synopses of the Third UK/Australian International Symposium on DSP for Communication Systems : Coventry, 12-14 Dec. 1994 /. Lancaster: Lancaster University, p. 93-95 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  73. Published

    Robust Data Driven Analysis for Electricity Theft Attack-Resilient Power Grid

    Khan, I. U., Javaid, N., Taylor, C. J. & Ma, X., 31/01/2023, In: IEEE Transactions on Power Systems. 38, 1, p. 537-548 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  74. Published

    Robust design optimization of wind turbine rotors: invited paper

    Campobasso, S., 09/2015, The 16th International Conference on Fluid Flow Technologies (CMFF’15). 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  75. Published

    Robust fabrication of ultra-soft tunable PDMS microcapsules as a biomimetic model for red blood cells

    Chen, Q., Singh, N., Schirrmann, K., Zhou, Q., Chernyavsky, I. & Juel, A., 28/07/2023, In: Soft Matter. 19, 28, p. 5249-5261 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  76. Published

    Robust Formation Control and Trajectory Tracking of Multiple Quadrotors Using a Discrete-Time Sliding Mode Control Technique

    Can, A., Imran, I., Price, J. & Montazeri, A., 31/12/2022, In: IFAC-PapersOnLine. 55, 10, p. 2974-2979 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  77. Published

    Robust identification and modeling of a simply-supported flexible beam

    Montazeri, A., Poshtan, J. & Choobdar, A., 11/07/2005, 12th International Congress on Sound and Vibration 2005, ICSV 2005. p. 5374-5381 8 p. (12th International Congress on Sound and Vibration 2005, ICSV 2005; vol. 6).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  78. Published

    Robust identification of a lightly damped flexible beam using set-membership and model error modeling techniques

    Esmaeilsabzali, H., Montazeri, A., Poshtan, J. & Jahed-Motlagh, M. R., 2006, Computer Aided Control System Design, 2006 IEEE International Conference on Control Applications, 2006 IEEE International Symposium on Intelligent Control, 2006 IEEE. New York: IEEE, p. 1881-1885 5 p. (IEEE International Conference on Control Applications).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  79. Published

    Robust PIP control of multivariable stochastic systems

    Taylor, J., Young, P. & Chotai, A., 1997, 12th International Conference on Systems Engineering.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  80. Published

    Robust PIP control of multivariable stochastic systems

    Taylor, C. J., Chotai, A. & Young, P., 17/10/1997, IEE Colloquium on Robust Control, Digest No. 97/380. Institution of Electrical Engineers (IEE), 3 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  81. Published

    Robust poly(p‐phenylene oxide) anion exchange membranes reinforced with pore‐filling technique for water electrolysis

    Feng, Z., Gupta, G. & Mamlouk, M., 15/05/2024, In: Journal of Applied Polymer Science. 141, 19, e55340.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  82. Published

    Robust Reinforcement Learning Based Visual Servoing with Convolutional Features

    Fei, H., Wang, Z. & Kennedy, A., 31/12/2023, In: IFAC-PapersOnLine. 56, 2, p. 9781-9786 6 p.

    Research output: Contribution to Journal/MagazineConference articlepeer-review

  83. Published

    Robustness comparison of control systems for a nuclear power plant.

    Ding, L., Bradshaw, A. & Taylor, C. J., 2004, Proceedings of the UKACC international conference on control.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  84. Published

    Robustness evaluation and robust design for Proportional-Integral-Plus control

    Wilson, E. D., Clairon, Q., Henderson, R. & Taylor, C. J., 1/09/2019, In: International Journal of Control. 92, 12, p. 2939-2951 13 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  85. Published

    Role of artificial intelligence and vibrational spectroscopy in cancer diagnostics

    Rehman, I. U., Khan, R. S. & Rehman, S., 1/08/2020, In: Expert Review of Molecular Diagnostics. 20, 8, p. 749-755 7 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  86. E-pub ahead of print

    Role of lattice strain in bifunctional catalysts for tandem furfural hydrogenation–esterification

    Hashim, L. H., Halilu, A., Umar, Y. B., Johan, M. R. B., Aroua, M. K., Koley, P. & Bhargava, S. K., 20/12/2022, (E-pub ahead of print) In: Catalysis Science and Technology.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  87. Published

    Role of Salivary Biomarkers in Oral Cancer Detection

    Khurshid, Z., Zafar, M. S., Khan, R. S., Najeeb, S., Slowey, P. D. & Rehman, I. U., 1/08/2018, In: Advances in Clinical Chemistry. 86, p. 23-70 48 p.

    Research output: Contribution to Journal/MagazineReview articlepeer-review

  88. Published

    Roll- and pitch-plane coupled hydro-pneumatic suspension. Part I Feasibility analysis and suspension properties

    Cao, D., Rakheja, S. & Su, C.-Y., 2010, In: Vehicle System Dynamics. 48, 3, p. 361-386 26 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  89. Published

    Roll- and pitch-plane-coupled hydro-pneumatic suspension. Part 2 dynamic response analyses

    Cao, D., Rakheja, S. & Su, C.-Y., 2010, In: Vehicle System Dynamics. 48, 4, p. 507-528 22 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  90. Published

    Rolling contact fatigue in bearings: Multiscale overview

    Kang, J. H., Hosseinkhani, B. & Rivera-Díaz-del-castillo, P. E. J., 2012, In: Materials Science and Technology. 28, 4, p. 44-49 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  91. Published

    Rolling contact fatigue in bearings: Phenomenology and modelling techniques

    Rivera-Díaz-del-Castillo, P. E. J., 2012, Bearing Steel Technologies, 9th Volume: Advances in Rolling Contact Fatigue Strength Testing and Related Substitute Technologies. ASTM International, Vol. 1548 STP. p. 355-381 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  92. Published

    Rolling contact fatigue in martensitic 100Cr6: Subsurface hardening and crack formation

    Kang, J. H., Vegter, R. H. & Rivera-Díaz-del-Castillo, P. E. J., 23/06/2014, In: Materials Science and Engineering: A. 607, p. 328-333 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  93. Published

    Rolling texture transition in FCC metals using the viscoplastic φ -model and considering mechanical twinning

    Wen, W., M'Guil, S. & Ahzi, S., 2012, In: Materials Science Forum. 702-703, p. 241-244 4 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  94. Published

    Room temperature mid-infrared emission from faceted InAsSb multi quantum wells embedded in InAs nanowires

    Alhodaib, A., Noori, Y., Carrington, P. J., Sanchez, A., Thompson, M. D., Young, R. J., Krier, A. & Marshall, A. R. J., 10/01/2018, In: Nano Letters. 18, 1, p. 235-240 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  95. Published

    ROS percetion in Arabidopsis thaliana : the ozone-induced calcium response.

    Evans, N. H., McAinsh, M., Hetherington, A. M. & Knight, M. R., 02/2005, In: Plant Journal. 41, 4, p. 615-626 12 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  96. Published

    Rotation Rectilinear Scan Path Generation for Selective Laser Sintering

    King, B. A. T., Rennie, A. E. W., Taylor, J. P. & Walsh, S. M. R., 21/06/2018, Assises Europeennes de la Fabrication Additive.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  97. Published

    Rotor performance, blade loads, and wake resolution in Navier-Stokes CFD of tidal stream turbines

    Attene, F., Balduzzi, F., Bianchini, A. & Campobasso, S., 6/09/2021, The 14th European Wave and Tidal Energy Conference (EWTEC) 2021. EWTEC, p. 2110-1-2110-10 10 p. (Proceedings of the European Wave and Tidal Energy Conference).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNConference contribution/Paperpeer-review

  98. Published

    Ru/TiO2-catalysed hydrogenation of xylose: the role of the crystal structure of the support

    Hernandez-Mejia, C., Gnanakumar, E. S., Olivos-Suarez, A., Gascon, J., Greer, H. F., Zhou, W., Rothenberg, G. & Raveendran Shiju, N., 24/08/2015, In: Catalysis Science and Technology. 6, 2, p. 577-582 6 p.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

  99. Published

    Running with the PAC.

    Coulton, P., Rashid, O., Bamford, W. & Edwards, R., 06/2006. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN Conference paperpeer-review

  100. Published

    RuO2−MXene nanocomposite coated on bio-degradable loofah sponge for enhanced rate of evaporation in interfacial solar desalination

    Farabi, S. N., Habib, K., Mim, M., Zaed, M. A., Sopian, K. & Saidur, R., 31/12/2024, In: Results in Engineering. 24, 103450.

    Research output: Contribution to Journal/MagazineJournal articlepeer-review

Back to top