Home > Research > School of Engineering > Publications & Outputs

Research

View graph of relations

School of Engineering

3501 - 3600 out of 6,515Page size: 100
RSS feed of this list
  1. Forthcoming

    Design of a High-Gain Single-Feed Quad-Beam Metalens with Polarization Conversion at 0.1 THz

    Liu, X., Rodriguez Prado, D., Paoloni, C., Letizia, R., Zhang, L., Sanz-Izquierdo, B., Gao, S. & Wang, L., 12/12/2024, (Accepted/In press).

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  2. Published

    Autonomous phase-sensitive radio echo sounder for monitoring and imaging antarctic ice shelves

    Lok, L. B., Brennan, P. V., Ash, M. & Nicholls, K. W., 5/10/2015, 2015 8th International Workshop on Advanced Ground Penetrating Radar, IWAGPR 2015. Institute of Electrical and Electronics Engineers Inc., 4 p. 7292636

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  3. Published

    HF antenna prototype for geophysical ground penetrating radar

    Lok, L. B., Nicholls, K. W. & Corr, H. F. J., 20/06/2019, 2019 13th European Conference on Antennas and Propagation (EuCAP). IEEE, 3 p. 8740104

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  4. Published

    Highly selective hydropyrolysis of lignin waste to benzene, toluene and xylene in presence of zirconia supported iron catalyst

    Lonchay, W., Bagnato, G. & Sanna, A., 31/10/2022, In: Bioresource Technology. 361, 8 p., 127727.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  5. Published

    The driving mechanisms of particle precipitation during the moderate geomagnetic storm of 7 January 2005

    Longden, N., Honary, F., Kavanagh, A. J. & Manninen, J., 10/2007, In: Annales Geophysicae. 25, 9, p. 2053-2068 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  6. Published

    Particle precipitation during ICME-driven and CIR-driven geomagnetic storms

    Longden, N., Denton, M. H. & Honary, F., 5/06/2008, In: Journal of Geophysical Research. 113, A06205, p. 1-12 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  7. Published

    Mineralization of gellan gum hydrogels with calcium and magnesium carbonates by alternate soaking for bone regeneration applications

    Lopez-Heredia, M., Lapa, A., Reczynska, K., Pietryga, K., Balcaen, L., Mendes, A., Schaubroeck, D., Van der Voort, P., Dokupil, A., Plis, A., Stevens, C., Parakhonskiy, B., Samal, S., Vanhaecke, F., Chai, F., Chronakis, I., Blanchemain, N., Pamula, E., Skirtach, A. G. & Douglas, T. E. L., 08/2018, In: Journal of Tissue Engineering and Regenerative Medicine. 12, 8, p. 1825-1834 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  8. Published

    Feasibility of Using a Cheap Colour Sensor to Detect Blends of Vegetable Oils in Avocado Oil

    Lorenzo, N. D., da Rocha, R. A., Papaioannou, E. H., Mutz, Y. S., Tessaro, L. L. G. & Nunes, C. A., 14/02/2024, In: Foods. 13, 4, 572.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  9. E-pub ahead of print

    Rapid estimation of natural pigments in olive and avocado oils using a colorimetric sensor

    Lorenzo, N. D., da Rocha, R. A., Papaioannou, E., Tessaro, L. L. G. & Nunes, C. A., 30/09/2025, In: Journal of Food Composition and Analysis. 145, 107773.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  10. Published

    Effects of Mooring Lines on TALOS WEC Performance

    Loukogeorgaki, E., Michaelides, C., Sheng, W. & Aggidis, G., 17/06/2024, Proceedings of the Thirty-fourth (2024) International Ocean and Polar Engineering Conference. p. 616-623 8 p. 191-2024-TPC-0799

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  11. Published

    Mechanism of phenol adsorption onto electro-activated carbon granules

    Lounici, H., Aiouache, F., Belhocine, D., Drouiche, M., Pauss, A. & Mameri, N., 1/01/2004, In: Water Research. 38, 1, p. 218-224 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  12. Published

    InAs thermophotovoltaic cells with high quantum efficiency for waste heat recovery applications below 1000°C

    Lu, Q., Zhou, X., Krysa, A., Marshall, A., Carrington, P., Tan, C.-H. & Krier, A., 1/06/2018, In: Solar Energy Materials and Solar Cells. 179, p. 334-338 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  13. Published

    Thermal conductivity and the isotope effect in Li2O

    Lu, H., Murphy, S. T., Rushton, M. J. D., Parfitt, D. C. & Grimes, R. W., 11/2012, In: Fusion Engineering and Design. 87, 11, p. 1834-1838 5 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  14. Published

    Low bandgap GaInAsSb thermophotovoltaic cells on GaAs substrate with advanced metamorphic buffer layer

    Lu, Q., Montesdeoca Cardenes, D., Carrington, P. J., Marshall, A. R. J., Krier, A. & Beanland, R., 1/03/2019, In: Solar Energy Materials and Solar Cells. 191, p. 406-412 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  15. Published

    Mid-infrared interband cascade light-emitting diodes with InAs/GaAßb superlattices on InAs substrates: Smart Photonic and Optoelectronic Integrated Circuits XXII 2020

    Lu, Q., Zhou, Y., Chen, J., He, L., Krier, A., S., H. (Editor), L., V. (Editor) & (SPIE), T. S. O. P.-O. I. E., 1/02/2020.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  16. Published

    Surface Roughness Measurement of 3D-Printed 316L Stainless Steel Surface using Terahertz Time-Domain Spectroscopy

    Lu, Y., Zhu, H., Zaman, A., Lin, H., Degl'Innocenti, R. & Tian, Y., 28/08/2022, 2022 47th International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz). IEEE, 2 p. ( International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz)).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  17. Published

    An Experimental Case Study for the Course of ‘Testing Technology and Data Processing’

    Lu, S., Wang, X., Ju, B., Liu, Y., Xie, F. & Xia, M., 16/05/2023, Communications in Computer and Information Science. Singapore: Springer, p. 220-230 11 p. (Communications in Computer and Information Science).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  18. Published

    Near-Field Spectroscopy of Individual Asymmetric Split-Ring Terahertz Resonators

    Lu, Y., Hale, L. L., Zaman, A. M., Addamane, S. J., Brener, I., Mitrofanov, O. & Degl’Innocenti, R., 31/08/2023, In: ACS Photonics. 10, 8, p. 2832-2838 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  19. Published

    Contactless 3D surface characterization of additive manufactured metallic components using terahertz time-domain spectroscopy

    Lu, Y., Zhu, H., Zaman, A. M., Rennie, A. E. W., Lin, H., Tian, Y. & Degl’Innocenti, R., 9/08/2023, In: Optical Materials Express. 13, 9, 13 p., 2513.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  20. Published

    Terahertz Ultrafast Spectroscopy: A Paradigm for Material Characterization and Light Interaction

    Lu, Y., 18/03/2024, Lancaster University. 197 p.

    Research output: Thesis › Doctoral Thesis

  21. Published

    Special Issue: Mixed-Technology Testing

    Lubaszewski, M. (Editor), Richardson, A. (Editor) & Su, C. C. (Editor), 07/2009, In: Microelectronics Journal. 40, 7, p. 1041-1041 1 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  22. Published

    Guest Editorial

    Lubaszewski, M. (Editor), Richardson, A. (Editor) & Su, C. C. (Editor), 12/2007, In: Journal of Electronic Testing. 23, 6, p. 469-469 1 p.

    Research output: Contribution to Journal/Magazine › Editorial › peer-review

  23. Published

    Technological Progress Improves Plans for Sustainable Small-Scale Hydropower Generation

    Luchinskaya, E., Aggidis, G. & Howard, D. C., 2010, Reliable hydropower for a safe and sustainable power production: 16th International Seminar on Hydropower Plants. Vienna: Institute for Energy Systems and Thermodynamics, p. 795-804 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  24. Published

    Quantification of water states in thin proton exchange membrane manufacturing using terahertz time-domain spectroscopy

    Ludlam, G., Alves De Lima, D., Li, X., Coulson, B., Nesling, E., Degl'Innocenti, R., Dawson, R., Peruffo, M. & Lin, H., 26/09/2022, IRMMW-THz 2022 - 47th International Conference on Infrared, Millimeter and Terahertz Waves.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  25. Published

    Measurement of Water Uptake and States in Nafion Membranes Using Humidity-Controlled Terahertz Time-Domain Spectroscopy

    Ludlam, G. A. H., Gnaniah, S. J. P., Degl’Innocenti, R., Gupta, G., Wain, A. J. & Lin, H., 20/05/2024, In: ACS Sustainable Chemistry and Engineering. 12, 20, p. 7924-7934 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  26. Published

    Quantifying humidity dependent water states of Nafion 117 membranes using terahertz time-domain spectroscopy

    Ludlam, G. A. H., Degl’Innocenti, R., Gupta, G. & Lin, H., 3/08/2023, Optical Sensors: Proceedings Optica Sensing Congress 2023, AIS, FTS, HISE, Sensors, ES 2023. Optical Society of America (OSA), JW2A.33. (Optical Sensors: Proceedings Optica Sensing Congress 2023, AIS, FTS, HISE, Sensors, ES 2023).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  27. Published

    Nanoscale surface roughness effects on THz vacuum electron device performance

    Luhmann Jr., N. C., Popovic, B., Himes, L., Barchfeld, R., Gamzina, D., Paoloni, C., Letizia, R., Mineo, M., Feng, J., Tang, Y., Gao, M. & Pan, P., 27/07/2015, Nanotechnology (IEEE-NANO) , 2015 IEEE 15th International Conference on. IEEE, p. 55-58 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  28. Published

    The thermodynamics of hydride precipitation: The importance of entropy, enthalpy and disorder

    Lumley, S. C., Grimes, R. W., Murphy, S. T., Burr, P. A., Chroneos, A., Chard-Tuckey, P. R. & Wenman, M. R., 15/10/2014, In: Acta Materialia. 79, p. 351-362 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  29. Published

    The stability of alloying additions in Zirconium

    Lumley, S. C., Murphy, S. T., Burr, P. A., Grimes, R. W., Chard-Tuckey, P. R. & Wenman, M. R., 06/2013, In: Journal of Nuclear Materials. 437, 1-3, p. 122-129 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  30. Published

    Investigation of the effect of DC electric field on a small ethanol diffusion flame

    Luo, Y., Gan, Y. & Jiang, X., 15/01/2017, In: Fuel. 188, p. 621–627 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  31. Published

    Metamodel-assisted design optimization of piezoelectric flex transducer for maximal bio-kinetic energy conversion

    Luo, L., Liu, D., Zhu, M. & Ye, J., 1/11/2017, In: Journal of Intelligent Material Systems and Structures. 28, 18, p. 2528-2538 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  32. Published

    Maximum energy conversion from human motion using piezoelectric flex transducer: A multi-level surrogate modeling strategy

    Luo, L., Liu, D., Zhu, M. & Ye, J., 1/09/2018, In: Journal of Intelligent Material Systems and Structures. 29, 15, p. 3097-3107 11 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  33. Published

    Design and reliability-based optimization of the piezoelectric flex transducer

    Luo, L., 2018, Lancaster University. 209 p.

    Research output: Thesis › Doctoral Thesis

  34. Published

    Laser Welding Penetration Monitoring Based on Time-Frequency Characterization of Acoustic Emission and CNN-LSTM Hybrid Network

    Luo, Z., Wu, D., Zhang, P., Ye, X., Shi, H., Cai, X. & Tian, Y., 15/02/2023, In: Materials. 16, 4, 22 p., 1614.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  35. Published

    An integrated condition-based opportunistic maintenance framework for offshore wind farms

    Luo, J., Luo, X., Ma, X., Zan, Y. & Bai, X., 30/04/2025, In: Reliability Engineering and System Safety. 256, 110701.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  36. Published

    Additive manufacturing technologies and functional analysis used in product development optimization

    Lupeanu, M., Rennie, A. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 105-112 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  37. Published

    Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

    Lupeanu, M., Rennie, A., Eggbeer, D. & Neagu, C., 06/2011, Rapid Design, Prototyping and Manufacturing: Proceedings of the Twelfth Conference on. CRDM Ltd, p. 173-181 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  38. Published

    Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling: Paper: ESDA2012-82410

    Lupeanu, M., Brooks, H., Rennie, A., Celik, K., Neagu, C. & Akinci, I., 07/2012, ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis (ESDA 2012): Proceedings of the . Nantes: American Society of Mechanical Engineers (ASME), 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  39. Published

    Function Based Design for Rapid Prototyping: A Medical Industry Application for an Ocular Speculum

    Lupeanu, M., Brooks, H., Rennie, A., Hill, D. & Neagu, C., 06/2012, 13th Rapid Design, Prototyping & Manufacturing Conference: Proceedings of the . Bocking, C. & Rennie, A. (eds.). High Wycombe: CRDM Ltd, p. 45-53 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  40. Published

    Functional analysis for the development of bio-medical products

    Lupeanu, M., Neagu, C., Opran, C. & Rennie, A., 10/2012, p. 330-336. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  41. Published

    Product Optimization by Rapid Manufacturing and Targeted Functional Analysis

    Lupeanu, M., Rennie, A., Neagu, C. & Celik, K., 2011, 16th European Forum on Rapid Prototyping and Manufacturing: Proceedings of the. 14 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  42. Published

    Research on deploying technical functional analysis for additive manufacturing of a surgical device for intravitreal interventions

    Lupeanu, M., Brooks, H., Rennie, A. & Hill, D., 2013, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 75, 1, p. 141-160 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  43. Published

    The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications

    Lupeanu, M., Rosu, M.-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

  44. Published

    Research strategy on developing additive manufactured bespoke ophthalmic instruments assisted by an online integrated platform

    Lupeanu, M., Rennie, A., Rosu, M.-M. & Moagar-Poladian, G., 04/2014, In: Buletinul Ştiinţific al Universităţii Politehnica Bucureşti, Seria D – Inginerie Mecanică. 76, 2, p. 143-162 20 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  45. Unpublished

    Redesign of custom-fitted surgical guide with targeted functional analysis fabricated via SLM

    Lupeanu, M., Rennie, A. & Neagu, C., 31/03/2014, (Unpublished).

    Research output: Contribution to conference - Without ISBN/ISSN › Poster

  46. Published

    Automated software for streamlining optimisation of resource planning for an additive manufacturing system

    Lupeanu, M., Rosu, M.-M., Doicin, C., Rennie, A. & Neagu, C., 09/2014, Proceedings of 3rd International Conference Advances in Engineering & Management (ADEM 2014). 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  47. Published

    Developments in electromagnetic tomography instrumentation.

    Lyon, G., Peyton, A. J., Yu, Z. Z. & Beck, M. S., 06/1996, IEE Colloguium on Advances in electrical Tomography (Digest No: 1196/143). London: IEEE, p. 12/1-12/4

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  48. Published

    Development of a modular data acquisition system for electrical tomography.

    Lyon, G. M. & Peyton, A. J., 1997, Proceedings of the conference on frontiers in industrial process tomography II. The Netherlands

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  49. Published

    Development in electromagnetic tomography for industrial applications.

    Lyon, G. M., Yu, Z. Z. & Peyton, A. J., 1997, Proceedings of the progress in electromagnetics research symposium: PIERS. Hong Kong

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  50. E-pub ahead of print

    A Novel Multiview Sampling-based Meta Self-Paced Learning Approach for Class-imbalanced Intelligent Fault Diagnosis

    Lyu, P., Zheng, P., Yu, W., Liu, C. & Xia, M., 13/10/2022, (E-pub ahead of print) In: IEEE Transactions on Instrumentation and Measurement. p. 1-1 1 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  51. Published

    Mechanical performance and anisotropic analysis of rubberised 3D-printed concrete incorporating PP fibre

    Lyu, X., Elchalakani, M., Wang, X., Sun, J., Huang, B., Saafi, M., Zhu, B., Wei, Z. & Wang, Y., 31/08/2024, In: Environmental Science and Pollution Research. 31, 36, p. 49100-49115 16 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  52. Published

    Biocompatible choline based ionic salts: solubility in short-chain alcohols

    M. Lopes, J., B. Paninho, A., F. Môlho, M., V. M. Nunes, A., Rocha, A., M. T. Lourenço, N. & Najdanovic-Visak, V., 12/2013, In: Journal of Chemical Thermodynamics. 67

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  53. Published

    Performance of sodium chloride versus commercial ionic liquid as salting-out media for the separation of nicotine from its aqueous solutions

    M. Lopes, J., V. M. Nunes, A., Nunes da Ponte, M., Visak, Z. P. & Najdanovic-Visak, V., 2014, In: Industrial and Engineering Chemistry Research. 53, 23, p. 9883-9888 6 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  54. Published

    An interactive PC-based electrical power system simulator for engineering education.

    Ma, X., Taylor, C. J. & Joyce, M. J., 2009.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper

  55. Published

    Development of multiple frequency electromagnetic induction systems for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P., 24/07/2008, In: Measurement Science and Technology. 19, 9, 10 p., 094008.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  56. Published

    Feature detection and monitoring of eddy current imaging data by means of wavelet based singularity analysis.

    Ma, X. & Peyton, A. J., 11/2010, In: NDT and E International. 43, 8, p. 687-694 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  57. Unpublished

    Performance evaluation of Zeolite Rankine cycle systems using scroll expander for combined heat and electricity generation.

    Ma, X., 28/10/2010, (Unpublished) 9 p.

    Research output: Working paper

  58. Unpublished

    Analysis and verification of fuel exhaust emissions.

    Ma, X., 2/12/2010, (Unpublished) 12 p.

    Research output: Working paper

  59. Published

    Hardware and software design for an electromagnetic induction tomography (EMT) system for high contrast metal process applications.

    Ma, X., Peyton, A. J., Higson, S. R., Lyons, A. & Dickinson, S. J., 01/2006, In: Measurement Science and Technology. 17, 1, p. 111-118 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  60. Published

    Eddy current measurement of the electrical conductivity and porosity of metal foams.

    Ma, X. & Peyton, A. J., 03/2006, In: IEEE Transactions on Instrumentation and Measurement. 55, 2, p. 570-576 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  61. Published

    Eddy current measurements of electrical conductivity and magnetic permeability of porous metals.

    Ma, X., Peyton, A. J. & Zhao, Y. Y., 10/2006, In: NDT and E International. 39, 7, p. 562 -568

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  62. Published

    Measurement of the electrical conductivity of open-celled aluminium foam using non-contact eddy current techniques.

    Ma, X., Peyton, A. J. & Zhao, Y. Y., 07/2005, In: NDT and E International. 38, 5, p. 359 -367

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  63. Published

    Electromagnetic techniques for imaging the cross-section distribution of molten steel flow in the continuous casting nozzle.

    Ma, X., Peyton, A. J., Binns, R. & Higson, S. R., 04/2005, In: IEEE Sensors Journal. 5, 2, p. 224-232 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  64. Published

    Interpretation of wavelet analysis and its application in partial discharge detection.

    Ma, X., Zhou, C. & Kemp, I. J., 06/2002, In: IEEE Transactions on Dielectrics and Electrical Insulation. 9, 3, p. 446-457 12 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  65. Published

    Automated wavelet selection and thresholding for PD detection.

    Ma, X., Zhou, C. & Kemp, I. J., 04/2002, In: IEEE Electrical Insulation Magazine. 18, 2, p. 37-45 9 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  66. Published

    Imaging internal structure with electromagnetic induction tomography.

    Ma, X., Peyton, A. J., Soleimani, M. & Lionheart, W. R. B., 12/03/2007, Instrumentation and Measurement Technology Conference, 2006. IMTC 2006. Proceedings of the IEEE. IEEE, p. 299 -303

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  67. Published

    Eddy current measurement of the electrical conductivity and porosity of metal foams.

    Ma, X. & Peyton, A. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 127-132 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  68. Published

    Novel computer-based processing system for partial discharge detection and diagnosis.

    Ma, X., Zhou, C. & Kemp, I. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 684-688 5 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  69. Published

    Investigation into the use of wavelet theory for partial discharge pulse extraction in electrically noisy environments.

    Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Dielectric Materials, Measurements and Applications, 2000. Eighth International Conference on (IEE Conf. Publ. No. 473). IEE, p. 123-126 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  70. Published

    DSP based partial discharge characterisation by wavelet analysis.

    Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Proceedings. ISDEIV. XIXth International Symposium on Discharges and Electrical Insulation in Vacuum, 2000.. IEEE, Vol. 2. p. 780 -783

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  71. Published

    PD pulse propagation studies using the wavelet transform.

    Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Electrical Insulation and Dielectric Phenomena, 2000 Annual Report Conference on. IEEE, Vol. 2. p. 626 -629

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  72. Published

    Wavelets for the analysis and compression of partial discharge data.

    Ma, X., Zhou, C. & Kemp, I. J., 7/08/2002, Conference on Electrical Insulation and Dielectric Phenomena, 2001 Annual Report.. IEEE, p. 329-334 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

  73. Published

    Development of a fast electromagnetic induction tomography system for metal process applications.

    Ma, X., Higson, S. R., Lyons, A. & Peyton, A. J., 09/2005. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  74. Published

    Imaging the flow profile of molten steel through a submerged pouring nozzle.

    Ma, X., Peyton, A. J., Binns, R. & Higson, S. R., 09/2003. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  75. Published

    A feasibility study into the use of wavelet transform in partial discharge analysis.

    Ma, X., Zhou, C. & Kemp, I. J., 09/2000. 5 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  76. Published

    Developments of multiple frequency electromagnetic induction system for steel flow visualization.

    Ma, X., Peyton, A. J., Higson, S. R. & Drake, P., 09/2007. 8 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  77. Unpublished

    Feasibility study for tomographic walk-through metal detector.

    Ma, X., Peyton, A. J. & Lionheart, W. R. B., 01/2007, (Unpublished) Unpublished, 12 p.

    Research output: Working paper

  78. Published

    Online intelligent condition monitoring of electrical machines.

    Ma, X., 05/2011, p. 223-228. 6 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  79. Published

    Novel early warning fault detection for wind-turbine-based DG systems

    Ma, X., 5/03/2012, Proceedings of 2011 2nd IEEE PES International Conference and Exhibition on Innovative Smart Grid Technologies (ISGT Europe): 5-7 Dec. 2011, Manchester, UK. IEEE, p. 1-6 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  80. Published

    Electromagnetic NDT and condition monitoring - A personal view

    Ma, X., 21/11/2011, Proceedings of 2011 17th International Conference on Automation and Computing (ICAC’11): 10 Sept. 2011, Huddersfield, UK. IEEE, p. 266-271 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  81. Published

    Generic model of a community-based microgrid integrating wind turbines and photovoltaics

    Ma, X., Qin, J. & Wang, Y., 07/2012, p. 3147-3153. 7 p.

    Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review

  82. Published

    Investigations of the state-of-the-art methods for electromagnetic NDT and electrical condition monitoring

    Ma, X., 09/2012, In: Insight – Non-Destructive Testing and Condition Monitoring. 54, 9, p. 482-488 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  83. Published

    A remote condition monitoring system for wind-turbine based DG systems

    Ma, X., Wang, G., Cross, P. & Zhang, X., 31/05/2012, In: Journal of Physics: Conference Series. 364, 1, 7 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  84. Published

    Generic model of a community-based microgrid integrating wind turbines, photovoltaics and CHP generations

    Ma, X., Wang, Y. & Qin, J., 12/2013, In: Applied Energy. 112, p. 1475–1482 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  85. Published

    A novel condition monitoring and real-time simulation system for wind turbines

    Ma, X. & Cross, P., 4/02/2013, Proceedings of EWEA 2013 - European Wind Energy Conference & Exhibition. Vienna: EWEA, 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  86. Published

    Functional simulation of logic digital system with microprocessor

    Ma, X. & Wu, J., 1990, In: Dianli Xitong Zidonghue/Automation of Electric Power Systems. 14, 3, p. 57-64 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  87. Published

    Development of communication simulation software for TMS32010 multi-processor parallel system

    Ma, X. & Wu, J., 1991, In: Industrial Control Computer. p. 37-39 3 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  88. Published

    University collaboration improves Mimic condition monitoring

    Ma, X. & Briddon, M., 23/09/2015, The Motorship Magazine - insight for marine technology professionals.

    Research output: Contribution to specialist publication › Featured article

  89. Published

    A condition monitoring system for an early warning of developing faults in wind turbine electrical systems

    Ma, X., Cross, P. & Qian, P., 1/12/2016, In: Insight – Non-Destructive Testing and Condition Monitoring. 58, 12, p. 663-670 8 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  90. Published

    State-of-the-art forecasting algorithms for microgrids

    Ma, J. & Ma, X., 26/10/2017, 23rd International Conference on Automation and Computing (ICAC),2017. IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  91. Published

    A Review of Forecasting Algorithms and Energy Management Strategies for Microgrids

    Ma, J. & Ma, X., 06/2018, In: Systems Science and Control Engineering. 6, 1, p. 237-248 12 p.

    Research output: Contribution to Journal/Magazine › Review article › peer-review

  92. Published

    Proceedings of 2018 24th International Conference on Automation and Computing (ICAC)

    Ma, X. (Editor), 1/07/2019, IEEE. 797 p.

    Research output: Book/Report/Proceedings › Proceedings

  93. Published

    莲仁钻削去心过程力学特性及减损工艺参数优化

    Ma, Q., Deng, F., Lei, L., Ma, J., Liu, K. & Liu, L., 1/05/2019, In: Nongye Gongcheng Xuebao/Transactions of the Chinese Society of Agricultural Engineering. 35, 9, p. 291-300 10 p.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  94. Published

    Consensus-based Hierachical Demand Side Management in Microgrid

    Ma, J. & Ma, X., 11/11/2019, 2019 25th IEEE International Conference on Automation & Computing (ICAC). IEEE, 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  95. Published

    FUEL 32-Nanocomposite Ni-ZrO2 catalysts for hydrogen production from ethanol steam reforming

    Ma, X., Li, S., Wang, H., Wang, X. & Li, Z., 2008, In: Abstracts of Papers of the American Chemical Society. 236

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

  96. Published

    以生产生物柴油的副产物甘油蒸汽重整制合成气的方法

    Ma, X. (Inventor), Li, S. (Inventor), Wang, X. (Inventor), Wang, H. (Inventor) & Wang, S. (Inventor), 2007, Patent No. CN101062762A

    Research output: Patent

  97. Published

    New software aims to improve fuel efficiency, reduce unnecessary maintenance

    Ma, X. & Briddon , M., 25/09/2015, Ship & Bunker - The World's Most Read Publication for the Marine Fuels Industry.

    Research output: Contribution to specialist publication › Featured article

  98. Published

    New software aims to improve fuel efficiency

    Ma, X. & Briddon, M., 25/09/2015, SAFETY4SEA.

    Research output: Contribution to specialist publication › Featured article

  99. Published

    Distributed control of battery energy storage system in a microgrid

    Ma, J. & Ma, X., 13/02/2020, 2019 8th International Conference on Renewable Energy Research and Applications (ICRERA). IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

  100. Published

    HVAC-based cooperative algorithms for demand side management in a microgrid

    Ma, J., Ma, X. & Ilic, S., 9/11/2019, In: Energies. 12, 22, 18 p., 4276.

    Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...32 33 34 35 36 37 38 39 ...66 Next

Back to top