School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

101 - 200 out of 6,516Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
A comparative study of wave energy technologies, public workshop: ‘making waves: the economic and social impacts of marine renewables.
Aggidis, G. A., Bradshaw, A., French, M. J., McCabe, A. P., Meadowcroft, J. A. C. & Widden, M. B., 2005, Proceedings of the EPSRC SuperGen marine energy research consortium.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A comparative study of wave energy technologies, public workshop: making waves: the economic and social impacts of marine renewables. (Invited paper)
Aggidis, G. A., Stallard, T. J. & Rothschild, R., 2005.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
A comparative study of wire feeding and powder feeding in direct diode laser deposition for rapid prototyping
Syed, W. U. H., Pinkerton, A. J. & Li, L., 2005, In: Applied Surface Science. 247, 1-4, p. 268-276 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative study on biodiesel production from waste cooking oils obtained from different sources using supercritical methanol
Aboelazayem, O., Gadalla, M. & Saha, B., 5/09/2017, In: Journal of Bioremediation & Biodegradation. 8, 5, p. 56 1 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comparative Study on Colloidal Nanosilica Incorporation in Polymer-Modified Cement Mortars
Zabihi, N. & Özkul, M. H., 2018, International Congress on Polymers in Concrete. p. 675-681 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparative study on microstructure and properties of traditional laser cladding and high-speed laser cladding of Ni45 alloy coatings
Yuan, W., Li, R., Chen, Z., Gu, J. & Tian, Y., 15/01/2021, In: Surface and Coatings Technology. 405, 13 p., 126582.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparative study on the aqueous photodegradation of two organophosphorus pesticides under simulated and natural sunlight.
Weber, J., Halsall, C. J., Wargent, J. J. & Paul, N. D., 2009, In: Journal of Environmental Monitoring. 11, 3, p. 654-659 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of carbon footprint calculations for end of life product recovery methods using PAS 2050
Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2010, Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis: (ESDA 2010). ASME, 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
A Comparison of Carbon Footprint Calculations for End of Life Product Recovery Methods using PAS 2050
Appleby, M., Lambert, C. & Rennie, A., 12/2009, (Unpublished). 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators
Akurugoda Gamage, K. & Joyce, M., 2011. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A comparison of collimator geometries for imaging mixed radiation fields with fast liquid organic scintillators
Gamage, K., Joyce, M. & Taylor, G., 08/2012, In: IEEE Transactions on Nuclear Science. 59, 4, p. 1432-1437 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of cut path deviation with continuous and pulsed beam modes in diode laser chip-free cutting of glass
Nisar, S., Li, L., Sheikh, M. A. & Pinkerton, A. J., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 1070-1079 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of four different digital algorithms for pulse-shape discrimination in fast scintillators.
Gamage, K. A. A., Joyce, M. & Hawkes, N. P., 21/06/2011, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 642, 1, p. 78-83 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of Geant4 and MCNP for modelling liquid scintillators
Balmer, M., Gamage, K. & Taylor, G., 2013.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
A comparison of laser additive manufacturing using gas and plasma-atomized Ti-6A1-4V powders
Ahsan, M. N., Pinkerton, A. J. & Ali, L., 2012, Innovative Developments in Virtual and Physical Prototyping. Bartolo, P., DeLemos, A., Tojeira, A., Pereira, A., Mateus, A., Mendes, A., DosSantos, C., Freitas, D., Bartolo, H., Almeida, H., IM, D., Dias, J., Domingos, M., Alves, N., Pereira, R., Patricio, T. & Ferreira, T. (eds.). Boca Raton: CRC PRESS-TAYLOR & FRANCIS GROUP, p. 625-633 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of MCNP6-1.0 and GEANT 4-10.1 when evaluating the neutron output of a complex real world nuclear environment: the thermal neutron facility at the Tri Universities Meson facility
Monk, S. D., Shippen, A., Colling, B. R., Cheneler, D., Al Hamrashdi, H. & Alton, T., 15/05/2017, In: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms. 399, p. 48-61 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of models of the isometric force of locust skeletal muscle in response to pulse train inputs
Wilson, E. D., Rustighi, E., Newland, P. L. & Mace, B. R., 03/2012, In: Biomechanics and modeling in mechanobiology. 11, 3-4, p. 519–532 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of plutonium abundance in soil from sites in the United Kingdom measured with high-efficiency, high-resolution γ-ray spectroscopy, neutron assay and accelerator mass spectrometry
Tighe, C., Christl, M., Degueldre, C., Andrew, J. & Joyce, M. J., 9/09/2018, Plutonium Futures: The Science 2018. San Diego: American Nuclear Society, p. 158-160 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A comparison of the manufacture and mechanical performance of porous aluminium and aluminium syntactic foams made by vacuum-assisted casting
Cheneler, D. & Kennedy, A. R., 3/07/2020, In: Materials Science and Engineering A. 789, 9 p., 139527.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comparison of the mechanical properties of a modified silorane based dental composite with those of commercially available composite material
Zakir, M., Kheraif, A. A. A. A., Asif, M., Wong, F. S. L. & Rehman, I. U., 2013, In: Dental Materials. 29, 4, p. e53-e59
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comparison of γ-ray Spectroscopy with Accelerator Mass Spectrometry for the Environmental Assay of Plutonium
Joyce, M. J., Tighe, C., Campbell, I., Christl, M., Degueldre, C., Iridoy, M. C., Semple, K. T. & Andrew, J., 5/09/2019, 2018 IEEE Nuclear Science Symposium and Medical Imaging Conference, NSS/MIC 2018 - Proceedings. IEEE, 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A composite material with Poisson’s ratio tunable from positive to negative values: an experimental and numerical study
Hou, X., Hu, H. & Silberschmidt, V., 12/2013, In: Journal of Materials Science. 48, 24, p. 8493-8500 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comprehensive analytical model for laser powder-fed additive manufacturing
Huang, Y., 31/10/2016, In: Additive Manufacturing. 12, A, p. 90-99
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comprehensive Business Model for Rapid Manufactured Products
Hasan, S. & Rennie, A., 10/2008, 19th International Symposium of the Danube-Adria-Association-for-Automation-and-Manufacturing - Intelligent Manufacturing & Automation: Focus on Next Generation of Intelligent Systems and Solutions. Vienna: DAAAM International, p. 591-592 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Comprehensive Review of dc/ac Single-Phase Differential-Mode Inverters for Low-Power Applications
Albakri, M., Darwish, A. & Twigg, P., 25/06/2024, In: Electronics. 13, 13, 2474.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comprehensive Review of Distributed MPPT for Grid-Tied PV Systems at the Sub-Module Level
Alharbi, Y., Darwish, A. & Ma, X., 19/07/2023, In: Energies. 16, 14, p. 5468 23 p., 5468.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
A Comprehensive Review of Fine Chemical Production Using Metal-Modified and Acidic Microporous and Mesoporous Catalytic Materials
Lantos, J., Kumar, N. & Saha, B., 10/05/2024, In: Catalysts. 14, 41 p., 317.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Comprehensive Review of Plant-Based Cosmetic Oils (Virgin Coconut Oil, Olive Oil, Argan Oil, and Jojoba Oil): Chemical and Biological Properties and Their Cosmeceutical Applications
Abdalla, S., Aroua, M. K. & Gew, L. T., 5/11/2024, In: ACS Omega. 9, 44, p. 44019-44032 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comprehensive review on advances of oil-based nanofluids for concentrating solar thermal collector application
Rubbi, F., Das, L., Habib, K., Aslfattahi, N., Saidur, R. & Alam, S. U., 15/09/2021, In: Journal of Molecular Liquids. 338, 37 p., 116771.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comprehensive review on improving the production of rich-hydrogen via combined steam and CO2 reforming of methane over Ni-based catalysts
Farooqi, A. S., Yusuf, M., Mohd Zabidi, N. A., Saidur, R., Sanaullah, K., Khan, A. & Abdullah, B., 1/09/2021, In: International Journal of Hydrogen Energy. 46, 60, p. 31024-31040 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A comprehensive review on preparation, dispersion stability and phase change cycling stability of phase change microemulsions
Yu, Y., Chen, Y., Mo, S., Chen, J., Du, Y. & Jia, L., 30/04/2025, In: Solar Energy Materials and Solar Cells. 282, 113426.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computational and experimental analysis of the buckling, postbuckling and initial failure of pultruded GRP columns.
Turvey, G. & Zhang, Y., 09/2006, In: Computers and Structures. 84, 22-23, p. 1527-1537 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computational study of preferential diffusion and scalar transport in nonpremixed hydrogen-air flame
Jiang, J., Jiang, X. & Zhu, M., 7/12/2015, In: International Journal of Hydrogen Energy. 40, 45, p. 15709-15722 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A computationally efficient adaptive IIR solution to active noise and vibration control systems
Montazeri, A. & Poshtan, J., 11/2010, In: IEEE Transactions on Automatic Control. 55, 11, p. 2671-2676 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Computer Aided Design (CAD) support tool for parametric design of products for Rapid Manufacture (RM)
Smith, P. & Rennie, A., 10/2009, 4th International Conference on Advanced Research in Virtual and Rapid Prototyping: Proceedings of the . Leiria, Portugal: Taylor & Francis Group, p. 95-100 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A computer-controlled dynamic phantom for respiratory-gated medical radiotherapy research
Bandala, M. & Joyce, M., 07/2013, In: IEICE Transactions on Fundamentals of Electronics, Communications and Computer Sciences . E96-A, 7, p. 1609-1616 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A conceptual study for a computer-based tool to support electronics design in a mechatronic environment.
Bradley, D. A., Walters, R. M. & Dorey, A. P., 2000, In: Microprocessors and Microsystems. 24, 2, p. 51-61 11 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
A condition monitoring system for an early warning of developing faults in wind turbine electrical systems
Ma, X., Cross, P. & Qian, P., 1/12/2016, In: Insight – Non-Destructive Testing and Condition Monitoring. 58, 12, p. 663-670 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A constitutive model for high strain rate deformation in FCC metals based on irreversible thermodynamics
Huang, M., Rivera-Díaz-del-Castillo, P. E. J., Bouaziz, O. & van der Zwaag, S., 09/2009, In: Mechanics of Materials. 41, 9, p. 982-988 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A continuous process for the liquid phase epoxidation of an olefinic compound
Saha, B. (Inventor), Ambroziak, K. (Inventor), Sherrington, D. (Inventor) & Mbeleck, R. (Inventor), 17/04/2018, Patent No. Indian Patent No.: 295846
Research output: Patent
Published
A continuous-flow apprach to alkene epoxidation catalysed by Polystyrene 2-(Aminomethyl)Pyridine supported Mo(VI) complex
Saha, B., Mohammed, M. & Mbeleck, R., 19/06/2016, 5th International Conference on Green Process Engineering (GPE 2016). Berruti, F. & Briens, C. (eds.). (An ECI Conference Series; vol. 16AG).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A control system for a new wave energy converter in irregular wave climates.
Aggidis, G. A., Rahmati, M. T., Chaplin, R. V., McCabe, A. P., Mingham, C. G., Causon, D. M. & Bhinder, M. A., 06/2009.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
A cooperative management strategy for battery energy storage system providing enhanced frequency response
Cao, X. & Zhao, N., 30/04/2022, In: Energy Reports. 8, p. 120-128 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A coupled approach to weld pool, phase and residual stress modelling of laser direct metal deposition (LDMD) processes
Vogel, M., Khan, M., Ibarra-Medina, J., Pinkerton, A., N'Dri, N. & Megahed, M., 2013, 2nd World Congress on Integrated Computational Materials Engineering. Li, M., Campbell, C., Thornton, K., Holm, E. & Gumbsch, P. (eds.). Wiley, p. 231-236 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
E-pub ahead of print
A coupled deep learning and DEM modelling approach for transverse crack prediction in UD-GFRP composites
Gu, Z., Kong, X., Liu, J., Ding, X. & Hou, X., 18/08/2025, In: Composites Science and Technology. 269, p. 111234 111234.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A coupled thermal and electrochemical study of lithium-ion battery cooled by paraffin/porous-graphite-matrix composite
Greco, A. & Jiang, X., 31/05/2016, In: Journal of Power Sources. 315, p. 127-139 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A creativity aid for designers.
French, M. J., Chaplin, R. V. & Langdon, P. M., 1993, Proceedings of ICED '93. Zurich: Heurista
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A criterion for the formation of high entropy alloys based on lattice distortion
Toda-Caraballo, I. & Rivera-Díaz-Del-Castillo, P. E. J., 1/04/2016, In: Intermetallics. 71, p. 76-87 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Current-Source Modular Converter for Large-Scale Photovoltaic Systems
Alotaibi, S., 2023, Lancaster University. 225 p.
Research output: Thesis › Doctoral Thesis
Published
A Data-Driven Statistical Approach for Monitoring and Analysis of Large Industrial Processes
Montazeri, A., Ansarizadeh, M. H. & Arefi, M., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2354-2359 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
A decade development of lipase catalysed synthesis of acylglycerols using reactors: a systematic review
Abd Razak, N. N., Cognet, P., Pérès, Y., Aroua, M. K. & Gew, L. T., 19/04/2024, (E-pub ahead of print) In: Reviews in Chemical Engineering.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
A DEM for visualising damage evolution and predicting failure of composite lamina under uniaxial and biaxial loads
Ismail, Y., 2017, (Unpublished) Lancaster University. 177 p.
Research output: Thesis › Doctoral Thesis
Published
A DEM model for visualising damage evolution and predicting failure envelope of composite laminae under biaxial loads
Ismail, Y., Yang, D. & Ye, J., 1/10/2016, In: Composites Part B: Engineering. 102, p. 9-28 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Dependable Microelectronic Peptide Synthesizer Using Electrode Data
Richardson, A., Kerkhoff, H. G., Zhang, X., Mailly, F., Nouet, P. & Liu, H., 2008, In: VLSI Design. 2008, n/a, 9 p., 437879.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A design for testability study on a high performance automatic gain control circuit.
Lechner, A., Richardson, A. M. D., Hermes, B. & Ohletz, M., 1998, Proceedings of the 16th IEEE VLSI test symposium. IEEE, p. 376-385 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A design-for-test structure for optimising analogue and mixed signal IC test
Bratt, A., Richardson, A. M. D., Harvey, R. & Dorey, A. P., 03/1995, European Design and Test Conference. IEEE, p. 24-33 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A detailed thermodynamic analysis of [C(4)mim][BF4] plus water as a case study to model ionic liquid aqueous solutions
Rebelo, L., Najdanovic-Visak, V., Visak, Z. P., da Ponte, M., Szydlowski, J., Cerdeirina, C., Troncoso, J., Romani, L., Esperanca, J., Guedes, H. & de Sousa, H., 2004, In: Green Chemistry. 6, 8, p. 369-381 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Development and validation of the in-house hydrodynamics code and the DNV software for TALOS wave energy converter
Sheng, W., Michailides, C., Loukogeorgaki, E. & Aggidis, G., 2/09/2023, p. 1-8. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A digital approach to neutron-gamma imaging with a narrow tungsten collimator aperture and a fast organic liquid scintillator detector
Gamage, K., Joyce, M. & Taylor, G., 07/2012, In: Applied Radiation and Isotopes. 70, 7, p. 1223-1227 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A digital method for the discrimination of neutrons and γ rays with organic scintillation detectors using frequency gradient analysis.
Liu, G., Joyce, M. J., Ma, X. & Aspinall, M., 06/2010, In: IEEE Transactions on Nuclear Science. 57, 3, p. 1682 -1691
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A digital partial built-in self-test structure for a high performance automatic gain control circuit
Lechner, A., Ferguson, J., Richardson, A. & Hermes, B., 1999, DESIGN, AUTOMATION AND TEST IN EUROPE CONFERENCE AND EXHIBITION 1999, PROCEEDINGS. Borrione, D. & Ernst, R. (eds.). LOS ALAMITOS: IEEE COMPUTER SOC, p. 232-238 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A dual-arm, hydraulically-actuated robot for operations within radiological environments
Albrecht, O., Monk, S. D., Bandala Sanchez, M., Montazeri, A. & Taylor, J., 1/10/2019.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
A DXDR large deflection analysis of uniformly loaded square, circular and elliptical orthotropic plates using non-uniform rectangular finite-differences
Kadkhodayan, M., Alamatian, J., Turvey, G. & Erfani Moghadam, A., 10/2012, In: Journal of Mechanical Science and Technology. 26, 10, p. 3231-3242 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A dynamic model for the planetary bearings in a double planetary gear set
Liu, J., Li, X. & Xia, M., 1/07/2023, In: Mechanical Systems and Signal Processing. 194, 23 p., 110257.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A dynamic model of the jump-to phenomenon during AFM analysis
Bowen, J. & Cheneler, D., 18/12/2012, In: Langmuir. 28, 50, p. 17273-17286 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
No renderer
Published
A facile analytical method for reliable selectivity examination in cofactor NADH regeneration
Saba, T., Burnett, J., Li, J., Kechagiopoulos, P. N. & Wang, X., 25/01/2020, In: Chemical Communications. 56, 8, p. 1231-1234 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A facile and greener synthesis of butylene carbonate via CO2 utilisation using a novel copper–zirconia oxide/graphene catalyst
Onyenkeadi, V., Aboelazayem, O. & Saha, B., 27/08/2018, The 16th International Conference on Carbon Dioxide Utilization (ICCDU XVI). Rio De Janeiro, Brazil 27 - 30 Aug 2018.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A facility for the characterisation of planar multilayer structures with preliminary niobium results
Turner, D., Malyshev, O., Burt, G., Junginger, T., Valizadeh, R. & Gurran, L., 20/07/2022, In: Superconductor Science and Technology. 35, 9, 20 p., 095004.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A failure mode analysis of a 6-bit folding ADCs.
Lechner, A., Richardson, A. M. D., Burbidge, M. & Hermes, B., 2001, Proceedings of the 7th IEEE international mixed-signal testing workshop (IMSTW ’01). p. 19-23 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A fast and portable imager for neutron and gamma emitting radionuclides
Al Hamrashdi, H., Cheneler, D. & Monk, S. D., 11/02/2020, In: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment. 953, 31 p., 163253.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A fast interpolation approach for the calculation of permittivity and conductivity to estimate the SAR
Priyadarshi, S., Pitman, S., Glover, P., Shah, S., Ye, J., Hu, B. & Letizia, R., 8/12/2014, RF and Wireless Technologies for Biomedical and Healthcare Applications (IMWS-Bio), 2014 IEEE MTT-S International Microwave Workshop Series on. IEEE, p. 261-266 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A fast large-signal model for coupled-cavity TWTS.
Srivastava, V. & Carter, R. G., 11/1988, In: IEEE Transactions on Electron Devices. 35, 11, Pa, p. 2068-2076 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A fast model of a 1-D nonlinear beam-wave interaction for a 225 GHz TWT
Waring, R., Hu, Y. & Paoloni, C., 14/09/2015, 2015 8th UK, Europe, China Millimeter Waves and THz Technology Workshop (UCMMT). IEEE, p. 1-3 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Fast Model of a 1-D Nonlinear Beam-Wave Interaction for a 225GHz TWT
Waring, R., Hu, Y. & Paoloni, C., 23/06/2015, 8th UK-Europe-China Workshop on mm-waves and THz Technologies . IEEE, 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A fault simulation methodology for MEMS.
Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the design automation and test in Europe conference. Paris: IEEE, p. 476-483 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A fault simulation methodology for MEMS.
Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the IEE symposium on quality and automation (RESQUA 2000). Penang, Malaysia
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A fault-tolerant MEF peptide synthesizer using control and direct sensing electrodes employing current and impedance tests
Zhang, X., Kerkhoff, H. G., Mailly, F., Nouet, P., Liu, H. & Richardson, A., 1/06/2007, 13th International mixed signals testing workshop and 3rd international GHz/Gbps test workshop, Póvoa de Varzim, Portugal. Portugal: University of Porto, p. 176-181 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A feasibility study into the use of wavelet transform in partial discharge analysis.
Ma, X., Zhou, C. & Kemp, I. J., 09/2000. 5 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A feasibility study on the use of glycerol as a solution to waste renewable energy storage in the United Kingdom
Lin, A. & Bagnato, G., 1/11/2024, In: Energy Conversion and Management. 319, 118873.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A field-portable, laser-diode spectrometer for the ultra-sensitive detection of hydrocarbon gases
Gibson, G., Monk, S. D. & Padgett, M., 04/2002, In: Journal of Modern Optics. 49, 5-6, p. 769-776 8 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
A finite-element 3-D method for the design of TWT collectors
D'Agostino, S. & Paoloni, C., 20/07/2000, In: Microwave and Optical Technology Letters. 26, 2, p. 119-122 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A first comparison of irregularity and ion drift velocity measurements in the E-region
Makarevich, R. A., Honary, F., Howells, V. S. C., Koustov, A. V., Milan, S. E., Davies, J. A., Senior, A., McCrea, I. W. & Dyson, P. L., 09/2006, In: Annales Geophysicae. 24, 9, p. 2375-2389 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A First Step towards Zero Nuclear Waste—Advanced Strategic Thinking in Light of iMAGINE
Merk, B., Detkina, A., Litskevich, D., Patel, M., Noori-kalkhoran, O., Cartland-Glover, G., Efremova, O., Bankhead, M., Degueldre, C. & Del Nevo, A. (Editor), 30/09/2022, In: Energies. 15, 19, 21 p., 7209.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A flexible real-time transputer based control system.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the 5th UK mechatronics forum international conference. Portugal
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A flexible streaming software architecture for scientific instruments
Grill, M., Barratt, K. & Honary, F., 13/02/2010, In: Earth Science Informatics. p. 1-7 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A flexible, transputer based robot control.
Nagy, Z. & Bradshaw, A., 1996, Proceedings of the international workshop on advanced robotics and intelligent machines. Manchester
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium.
Bissessur, Y. & Peyton, A. J., 2002, Proceedings of the 2nd international symposium on process tomography.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A framework for defining sustainable energy transitions: principles, dynamics, and implications
Sgouridis, S. & Csala, D., 2/05/2014, In: Sustainability. 6, 5, p. 2601-2622 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A framework for drought monitoring and assessment from a drought propagation perspective under non-stationary environments
Wei, X., Wu, X., Zhang, H., Lan, T., Cheng, C., Wu, Y. & Aggidis, G., 25/11/2024, In: Science of the Total Environment. 953, 175981.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A framework of design weakness detection through machine health monitoring for the evolutionary design optimization of multi-domain systems
Xia, M. & De Silva, C. W., 15/10/2014, Proceedings of the 9th International Conference on Computer Science and Education, ICCCSE 2014. Institute of Electrical and Electronics Engineers Inc., p. 205-210 6 p. 6926455. (Proceedings of the 9th International Conference on Computer Science and Education, ICCCSE 2014).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
A Frequency-Response Design Method for the Control of Wave Energy Converters in Irregular Seas.
McCabe, A. P., Stables, M. A. & Aggidis, G. A., 2010, (Unpublished).
Research output: Contribution to conference - Without ISBN/ISSN › Poster
Published
A Fuzzy Data-Driven Paradigmatic Predictor
Amirjavid, F., Nemati, H. & Barak, S., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2366-2371 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A Fuzzy Paradigmatic Clustering Algorithm
Amirjavid, F., Barak, S. & Nemati, H., 31/12/2019, In: IFAC-PapersOnLine. 52, 13, p. 2360-2365 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A gas-free powder delivery system for 100% deposition efficiency in Direct Laser Deposition
Wang, W., Pinkerton, A. J. & Li, L., 2008, Proceedings of the 27th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 415-423 9 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator
West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 2016, In: IFAC-PapersOnLine. 49, 12, p. 1261-1266 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A genetic algorithm approach for parameter optimization of a 7DOF robotic manipulator
West, C., Montazeri, A., Monk, S. D. & Taylor, C. J., 28/06/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
A genetic evolved machine learning approach for 3D DEM modelling of anisotropic materials with full consideration of particulate interactions
Gu, Z., Ding, X., Hou, X. & Ye, J., 1/02/2023, In: Composites Part B: Engineering. 250, 11 p., 110432.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A global wire planning scheme for Network-on-Chip.
Liu, J., Zheng, L.-R., Pamunuwa, D. B. & Tenhunen, H., 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03.. Vol. 4. p. IV-892-IV-895
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
A global-scale screening of non-native aquatic organisms to identify potentially invasive species under current and future climate conditions
Vilizzi, L., Copp, G. H., Hill, J. E., Adamovich, B., Aislabie, L., Akin, D., Al-Faisal, A. J., Almeida, D., Azmai, M. N. A., Bakiu, R., Bellati, A., Bernier, R., Bies, J. M., Bilge, G., Branco, P., Bui, T. D., Canning-Clode, J., Cardoso Ramos, H. A., Castellanos-Galindo, G. A. & Castro, N. & 176 others, Chaichana, R., Chainho, P., Chan, J., Cunico, A. M., Curd, A., Dangchana, P., Dashinov, D., Davison, P. I., de Camargo, M. P., Dodd, J. A., Durland Donahou, A. L., Edsman, L., Ekmekçi, F. G., Elphinstone-Davis, J., Erős, T., Evangelista, C., Fenwick, G., Ferincz, Á., Ferreira, T., Feunteun, E., Filiz, H., Forneck, S. C., Gajduchenko, H. S., Gama Monteiro, J., Gestoso, I., Giannetto, D., Gilles A.S., J., Gizzi, F., Glamuzina, B., Glamuzina, L., Goldsmit, J., Gollasch, S., Goulletquer, P., Grabowska, J., Harmer, R., Haubrock, P. J., He, D., Hean, J. W., Herczeg, G., Howland, K. L., İlhan, A., Interesova, E., Jakubčinová, K., Jelmert, A., Johnsen, S. I., Kakareko, T., Kanongdate, K., Killi, N., Kim, J.-E., Kırankaya, Ş. G., Kňazovická, D., Kopecký, O., Kostov, V., Koutsikos, N., Kozic, S., Kuljanishvili, T., Kumar, B., Kumar, L., Kurita, Y., Kurtul, I., Lazzaro, L., Lee, L., Lehtiniemi, M., Leonardi, G., Leuven, R. S. E. W., Li, S., Lipinskaya, T., Liu, F., Lloyd, L., Lorenzoni, M., Luna, S. A., Lyons, T. J., Magellan, K., Malmstrøm, M., Marchini, A., Marr, S. M., Masson, G., Masson, L., McKenzie, C. H., Memedemin, D., Mendoza, R., Minchin, D., Miossec, L., Moghaddas, S. D., Moshobane, M. C., Mumladze, L., Naddafi, R., Najafi-Majd, E., Năstase, A., Năvodaru, I., Neal, J. W., Nienhuis, S., Nimtim, M., Nolan, E. T., Occhipinti-Ambrogi, A., Ojaveer, H., Olenin, S., Olsson, K., Onikura, N., O'Shaughnessy, K., Paganelli, D., Parretti, P., Patoka, J., Pavia R.T.B., J., Pellitteri-Rosa, D., Pelletier-Rousseau, M., Peralta, E. M., Perdikaris, C., Pietraszewski, D., Piria, M., Pitois, S., Pompei, L., Poulet, N., Preda, C., Puntila-Dodd, R., Qashqaei, A. T., Radočaj, T., Rahmani, H., Raj, S., Reeves, D., Ristovska, M., Rizevsky, V., Robertson, D. R., Robertson, P., Ruykys, L., Saba, A. O., Santos, J. M., Sarı, H. M., Segurado, P., Semenchenko, V., Senanan, W., Simard, N., Simonović, P., Skóra, M. E., Slovák Švolíková, K., Smeti, E., Šmídová, T., Špelić, I., Srėbalienė, G., Stasolla, G., Stebbing, P., Števove, B., Suresh, V. R., Szajbert, B., Ta, K. A. T., Tarkan, A. S., Tempesti, J., Therriault, T. W., Tidbury, H. J., Top-Karakuş, N., Tricarico, E., Troca, D. F. A., Tsiamis, K., Tuckett, Q. M., Tutman, P., Uyan, U., Uzunova, E., Vardakas, L., Velle, G., Verreycken, H., Vintsek, L., Wei, H., Weiperth, A., Weyl, O. L. F., Winter, E. R., Włodarczyk, R., Wood, L. E., Yang, R., Yapıcı, S., Yeo, S. S. B., Yoğurtçuoğlu, B., Yunnie, A. L. E., Zhu, Y., Zięba, G., Žitňanová, K. & Clarke, S., 20/09/2021, In: Science of the Total Environment. 788, 16 p., 147868.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1 2 3 4 5 6 7 8 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us