School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

1301 - 1400 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Comparison between three GaAs monolithic transimpedance amplifiers for optical communication systems
Casao, J. A., Dorta, P., Caceres, J. L., Salazar-Palma, M., Perez, J., Orengo, G., Paoloni, C. & Giannini, F., 1/12/1992, 1992 22nd European Microwave Conference. IEEE, p. 330-335 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparison of catalytic activity of ZIF-8 and Zr/ZIF-8 for greener synthesis of chloromethyl ethylene carbonate by CO2 utilization
Olaniyan, B. & Saha, B., 21/01/2020, In: Energies. 13, 3, 25 p., 521.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of CdZnTe neutron detector models using MCNP6 and Geant4
Wilson, E., Anderson, M., Prendergasty, D. & Cheneler, D., 10/01/2018, In: EPJ Web of Conferences. 170, 5 p., 08008.
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Comparison of cement pressurisation in flanged and unflanged acetabular cups
Bhattacharya, R., Attar, F. G., Green, S. & Port, A., 3/02/2012, In: Journal of Orthopaedic Surgery and Research. 7, 1, 5 p., 5.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of classical and modern control applied to an excavator-arm.
Dixon, R., Taylor, C. J. & Shaban, E. M., 2005, International Federation of Automatic Control 16th Triennial World Congress.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparison of couplers for 0.346 THz DCW-BWO
Waring, R., Paoloni, C., Gamzina, D., Popovic, B., Himes, L., Letizia, R., Tang, Y., Li, H., Pan, P., Feng, J. & Luhmann, N. C., 7/03/2017, Proceedings of IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016. Yu, J. & Chen, X. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 208-209 2 p. 7874013. (Proceedings of IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparison of deterministic and stochastic methods for robust Identification of a lightly damped flexible beam
Montazeri, A., Esmaeilsabzali, H. & Poshtan, J., 2006, 13th International Congress on Sound and Vibration 2006, ICSV 2006. p. 2764-2773 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparison of different approaches for robust identification of a lightly damped flexible beam
Montazeri, A., Esmaeilsabzali, H., Poshtan, J. & Jahed Motlagh, M. R., 4/09/2006, 2006 14th European Signal Processing Conference. IEEE, p. 1-5 5 p. (European Signal Processing Conference).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparison of different synthesis schemes for production of sodium methoxide from methanol and sodium hydroxide
Aeamsuksai, N., Mueansichai, T., Charoensuppanimit, P., Kim-Lohsoontorn, P., Aiouache, F. & Assabumrungrat, S., 30/11/2020, In: Engineering Journal . 24, 6, p. 63-77 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of equivalent circuit model and mafia calculation for re-entrant and co-axial cavities.
Feng, J. J., Carter, R. G., Feng, Z. (Editor) & Chen, W. (Editor), 2004, p. 354-357. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Other
E-pub ahead of print
Comparison of Fixation Techniques in Oblique and Biplanar Chevron Medial Malleolar Osteotomies: a Finite Element Analysis
Levent, A., Yapti, M., Celik, H. K., Kose, O., Kılıçaslan, Ö. F. & Rennie, A., 23/07/2021, (E-pub ahead of print) In: The Journal of Foot and Ankle Surgery. YJFAS 53575.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of Fragmentation Functions for Jets Dominated by Light Quarks and Gluons from $pp$ and $\mathrm{Pb}+\mathrm{Pb}$ Collisions in ATLAS
Collaboration, A., Barton, A. E., Bertram, I. A., Borissov, G., Bouhova-Thacker, E. V., Fox, H., Henderson, R. C. W., Jones, R. W. L., Kartvelishvili, V., Long, R. E., Love, P. A., Muenstermann, D., Parker, A. J., Smizanska, M., Tee, A. S., Walder, J., Wharton, A. M. & Whitmore, B. W., 22/07/2019, In: Physical review letters. 123, 4, 21 p., 042001.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of Galvanometer and Polygon Scanning Systems on Component Production Rates in Selective Laser Sintering
King, B., Rennie, A. E. W. & Bennett, G. R., 27/04/2017. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Comparison of methods to determine auroral ionospheric conductances using ground-based optical and riometer data
Senior, A., Kosch, M. J. & Honary, F., 2008, In: Annales Geophysicae. 26, 12, p. 3831-3840 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of Neutron Detection Performance of Four Thin-Film Semiconductor Neutron Detectors Based on Geant4
Zhang, Z. & Aspinall, M., 27/11/2021, In: Sensors. 21, 15 p., 7930.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of Novozyme 435 and Purolite D5081 as heterogeneous catalysts for the pretreatment of used cooking oil for biodiesel production
Haigh, K. F., Abidin, S. Z., Vladisavljević, G. T. & Saha, B., 30/09/2013, In: Fuel. 111, p. 186-193 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of PI and PDF controls of a manipulator arm.
Nagy, Z. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 739-744 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Comparison of power capture in irregular waves and their regular wave components.
Meadowcroft, J. A. C., Stallard, T. J. & Baker, N. J., 2005, Proceedings of the 6th European wave and tidal energy conference.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Comparison of Pulse Shape Discrimination Characteristics in Three Organic Scintillators for a High Resolution Coded-Aperture Neutron Imager
Akurugoda Gamage, K. A. & Cieslak, M., 24/10/2016, 2016 European Nuclear Conference (ENC-2016). European Nuclear Society, p. 306-309 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Comparison of stretched-wire, bead-pull and numerical impedance calculations on 3.9 GHz dipole cavities
Goudket, P., Beard, C., McIntosh, P., Burt, G., Dexter, A. & Jones, R. M., 1/01/2008, p. 859-861. 3 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Comparison of the characteristic energy of precipitating electrons derived from ground-based and DMSP satellite data
Ashrafi, M., Kosch, M. J. & Honary, F., 01/2005, In: Annales Geophysicae. 23, 1, p. 135-145 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparison of THz backward wave oscillators based on corrugated waveguides.
Mineo, M. & Paoloni, C., 2012, In: Progress In Electromagnetics Research Letters. 30, p. 163-171 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Compilation of empirical and semi-empirical Kα1, Kα2, Kβ1′, and Kβ2′ X-ray fluorescence cross-sections by the application of fitting approaches
Amari, K., Kahoul, A., Sampaio, J. M., Kasri, Y., Marques, J. P., Parente, F., Hamidani, A., Croft, S., Favalli, A., Daoudi, S., Zidi, A. & Berkani, B., 31/05/2025, In: Journal of Quantitative Spectroscopy and Radiative Transfer. 337, 109393.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Complex electronic implants and polymer packaging needs
Schoenleber, M., Vaghela, J., Ismail, F., Grahn, M., Popa, C., Rehman, I., Vadgama, P., T.S., S. (Editor) & S.I., K. (Editor), 2007, p. 703-706. 4 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Complex Envelope Alternating Direction Implicit Finite Difference Time Domain Analysis Of Ultra-Fast Photonic Bandgap Switches
Selim, R., Pinto, D. & Obayya, S., 2008. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract
Published
Complex envelope alternating direction implicit finite difference time domain method for photonic bandgap structures
Pinto, D. & Obayya, S., 2006. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Component repair using laser direct metal deposition
Wang, W., Pinkerton, A. J., Wee, L. M. & Li, L., 2007, Proceedings of the 35th International MATADOR Conference. Hinduja, S. & Fan, K. (eds.). London: Springer Verlag, p. 345-350 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Component repair using laser direct metal deposition
Pinkerton, A. J., Wang, W. & Li, L., 07/2008, In: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 222, 7, p. 827-836 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Components for the testing of a co-harmonic gyrotron cavity
Constable, D. A., Ronald, K., He, W., Fampris, X. S., Phelps, A. D. R. & Cross, A. W., 15/07/2010.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Composite Behaviour of Headed Stud Shear Connectors in Pairs with Profiled Metal Deck Flooring
Lam, D., Ye, J. & Qureshi, J., 2010, 4th International Conference on Steel & Composite Structures.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Composite Norland Optical Adhesive (NOA)/silicon flow focusing devices for colloidal particle manipulation and synthesis
Singh, N., Chakra, A., Vladisavljević, G. T., Cottin-Bizonne, C., Pirat, C. & Bolognesi, G., 5/11/2022, In: Colloids and Surfaces A: Physicochemical and Engineering Aspects. 652, 129808.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Composite Risers – an offshore deepwater solution
Amaechi, C. V. & Ye, J., 7/05/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Composite risers for deep waters using a numerical modelling approach
Amaechi, C. V., Gillett, N., Odijie, A. C., Hou, X. & Ye, J., 15/02/2019, In: Composite Structures. 210, p. 486-499 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Composition and process parameter dependence of yield strength in laser powder bed fusion alloys
Eskandari Sabzi, H. & Rivera-Díaz-del-Castillo, P. E. J., 1/10/2020, In: Materials and Design. 195, 11 p., 109024.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Composition-structure-property effects of antimony in soda-lime-silica glasses
Chen, T.-Y., Rautiyal, P., Vaishnav, S., Gupta, G., Schlegl, H., Dawson, R. J., Evans, A. W., Kamali, S., Johnson, J. A., Johnson, C. E. & Bingham, P. A., 15/09/2020, In: Journal of Non-Crystalline Solids. 544, 16 p., 120184.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comprehensive modeling of THz microscope with a sub-wavelength source
Lin, H., Fumeaux, C., Ung, B. S. Y. & Abbott, D., 2011, In: Optics Express. 19, 6, p. 5327-5338 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comprehensive Optimisation of Biodiesel Production Conditions via Supercritical Methanolysis of Waste Cooking Oil
Aboelazayem, O., Gadalla, M. & Saha, B., 20/05/2022, In: Energies. 15, 10, 24 p., e3766.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comprehensive stiffness regulation on multi-section snake robot with considering the parasite motion and friction effects
Ma, N., Zhou, H., Yuan, J. & He, G., 31/01/2024, In: Bioinspiration and Biomimetics. 19, 1, 016008.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comprehensive study on nanofluid and ionanofluid for heat transfer enhancement: A review on current and future perspective
Bakthavatchalam, B., Habib, K., Saidur, R., Saha, B. B. & Irshad, K., 1/05/2020, In: Journal of Molecular Liquids. 305, 33 p., 112787.
Research output: Contribution to Journal/Magazine › Review article › peer-review
Published
Compressible Navier-Stokes analysis of an oscillating wing in a power-extraction regime using efficient low-speed preconditioning
Campobasso, S. & Drofelnik, J., 30/08/2012, In: Computers and Fluids. 67, p. 26-40 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Compressible Navier-Stokes Analysis of Floating Wind Turbine Rotor Aerodynamics
Campobasso, M. S., Sanvito, A. G., Drofelnik, J., Jackson, A., Zhou, Y., Xiao, Q. & Croce, A., 4/11/2018, ASME 2018 1st International Offshore Wind Technical Conference: 4-7 November 2018, San Francisco, California, USA. The American Society of Mechanical Engineers, 12 p. IOWTC2018-1059
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Compressible Reynolds-Averaged Navier-Stokes analysis of wind turbine turbulent flows using a Fully-Coupled Low-Speed preconditioned multigrid solver
Campobasso, S., Yan, M., Drofelnik, J., Piskopakis, A. & Caboni, M., 2014, ASME Turbo Expo 2014: turbine technical conference and exposition: oil and gas applications; organic rankine cycle power systems; supercritical CO2 power cycles; wind energy. The American Society of Mechanical Engineers, Vol. 3B. 15 p. GT2014-25562
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Compression failure mode of two CMW bone cements
Green, S., Liu, C., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 2001, European Society of Biomaterials 16th Conference Proceedings, London, UK, September 2001.. London: European Society for Biomaterials, p. P51
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Abstract
Published
Compression moulding and injection over moulding of porous PEEK components
Siddiq, A. & Kennedy, A. R., 1/11/2020, In: Journal of the Mechanical Behavior of Biomedical Materials. 111, 10 p., 103996.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Compression of Frequency-Modulated Pulses using Helically Corrugated Waveguides and Its Potential for Generating Multigigawatt rf Radiation
Samsonov, S. V., Phelps, A. D. R., Bratman, V. L., Burt, G., Denisov, G. G., Cross, A. W., Ronald, K., He, W. & Yin, H., 2004, In: Physical review letters. 92, 11, p. 118301 -118301
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Compression performance of ultra-high performance concrete filled steel tube(UHPCFST) columns exposed to elevated temperature during construction
Wang, T., Yu, M., Liao, W., Yu, C. & Ye, J., 1/03/2025, In: Engineering Structures. 326, 119553.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Compressive performance and deterioration mechanism of ultra-high performance concrete with coarse aggregates under and after heating
Xue, C., Yu, M., Xu, H., Xu, L., Mohamed, S. & Ye, J., 1/04/2023, In: Journal of Building Engineering. 64, 20 p., 105502.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Compressive property and shape memory effect of 3D printed continuous ramie fiber reinforced biocomposite corrugated structures
Cheng, P., Wang, K., Chen, X., Le Duigou, A., Peng, Y. & Wen, W., 31/12/2022, In: Smart Materials and Structures. 31, 12, 12 p., 124003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Computation of K-shell X-ray Fluorescence Cross Section for photons ranging from 5.46 keV to 123.6 keV using three-dimensional semi-empirical formulae
Amari, K., Kahoul, A., Sampaio, J. M., Daoudi, S., Marques, J. P., Parente, F., Hamidani, A., Croft, S., Favalli, A., Kasri, Y., Zidi, A. & Berkani, B., 30/09/2025, In: Journal of Quantitative Spectroscopy and Radiative Transfer. 342, 109479.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational agent to integrate expert system and simulation language.
da Silva, J. C., Bennett, D. & Counsell, J. M., 1997, Proceedings of the 9th European simulation symposium. Germany
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Computational analysis of particle-laden-airflow erosion and experimental verification
Castorrini, A., Venturini, P., Corsini, A., Rispoli, F., Takizawa, K. & Tezduyar, T. E., 24/03/2020, In: Computational Mechanics. 65, p. 1549–1565 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational analysis of the effects of manufacturing tolerances on the performance of a regenerative liquid ring (RLR) pump
Karlsen-Davies, N. & Aggidis, G. A., 3/10/2016.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper
Published
Computational and experimental analysis of the effects of manufacturing tolerances on the performance of a regenerative liquid ring pump
Karlsen-Davies, N., 2017, Lancaster University. 231 p.
Research output: Thesis › Doctoral Thesis
Published
Computational and experimental study on silk fibroin and silk fibroin polymer electrolyte for application in transient energy storage devices
Haskew, M., 2022, Lancaster University. 160 p.
Research output: Thesis › Doctoral Thesis
Published
Computational design of light and strong high entropy alloys (HEA): Obtainment of an extremely high specific solid solution hardening
Menou, E., Tancret, F., Toda-Caraballo, I., Ramstein, G., Castany, P., Bertrand, E., Gautier, N. & Rivera Díaz-Del-Castillo, P. E. J., 11/2018, In: Scripta Materialia. 156, p. 120-123 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational design of model Re/Ru bearing Ni-base superalloys
Vamsi, K. V., Goswami, K. N., Vinay, K. S., Verma, S. K., Balamuralikrishnan, R., Das, N., Banerjee, D. & Karthikeyan, S., 2014, In: MATEC Web of Conferences. 14, 1 p., 17007.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational design of nanostructured steels employing irreversible thermodynamics
Rivera-Díaz-Del-Castillo, P. E. J., Hayashi, K. & Galindo-Nava, E. I., 10/2013, In: Materials Science and Technology (United Kingdom). 29, 10, p. 1206-1211 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational design of UHS maraging stainless steels incorporating composition as well as austenitisation and ageing temperatures as optimisation parameters
Xu, W., Rivera-Diaz-Del-Castillo, P. E. J. & Van Der Zwaag, S., 07/2009, In: Philosophical Magazine. 89, 20, p. 1647-1661 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational design of UHS stainless steel strengthened by multi-species nanoprecipitates combining genetic algorithms and thermokinetics
Xu, W., Del Castillo, P. E. J. R. D. & Van Der Zwaag, S., 1/12/2008, p. 1167-1181. 15 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Computational Fluid Dynamics Analysis of Floating Offshore Wind Turbines in Severe Pitching Conditions
Ortolani, A., Persico, G., Drofelnik, J., Jackson, A. & Campobasso, S., 13/12/2020, In: Journal of Engineering for Gas Turbines and Power. 142, 12, 15 p., 1210003.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational Fluid Dynamics and Data-Based Mechanistic Modelling of a Forced Ventilation Chamber
Tate, O., Wilson, E. D., Cheneler, D. & Taylor, C. J., 2018, In: IFAC-PapersOnLine. 51, 15, p. 263-268 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Computational framework for turbid water single-pixel imaging by polynomial regression and feature enhancement
Ma, M., Gu, L., Shen, Y., Guan, Q., Wang, C., Deng, H., Zhong, X., Xia, M. & Shi, D., 21/07/2023, (E-pub ahead of print) In: IEEE Transactions on Instrumentation and Measurement.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computational methods based on X-ray microtomography for quantitative analysis of lyophilized products
Capozzi, L., Barresi, A. A., Montalbano, G., Vitale Brovarone, C. & Pisano, R., 31/12/2019, Torino (Italy). 9 p.
Research output: Book/Report/Proceedings › Proceedings
Published
Computer aided conceptual design '97 : proceedings of the 1997 Lancaster International Workshop on Engineering Design CACD'97.
Bradshaw, A. & Counsell, J. M., 1997, Lancaster: Lancaster University: Centre for the Study of Environmental Change. 144 p.
Research output: Book/Report/Proceedings › Book
Published
Computer Aided Material Selection (CAMS) for Additive Manufacturing Materials
Smith, P. & Rennie, A., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 55-61 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Computer aided material selection for additive manufacturing materials
Smith, P. & Rennie, A., 12/2010, In: Virtual and Physical Prototyping. 5, 4, p. 209-213 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computer modelling of coupled-cavity travelling wave tubes
Carter, R. G., 1/12/1983, In: IEE Colloquium (Digest). 1983, 69
Research output: Contribution to Journal/Magazine › Conference article › peer-review
Published
Computer Modelling of Magnetron Anodes
Carter, R. G., Qian, B. P., Wang, G. & Feng, J. J., 1/12/1998, In: ITG-Fachbericht. 150, p. 459-464 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computer modelling of microwave tubes - a review.
Carter, R. G., 2001, Proceedings of IVEC ’2001.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Computer Simulation of Inter-Modulation Distortion in Broad-Band, Multi-Carrier, Travelling Wave Tube Amplifiers
Carter, R. G., Bösch, W., Srivastava, V. & Gatti, G., 1/12/1998, In: ITG-Fachbericht. 150, p. 343-348 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computer simulation of intermodulation distortion in traveling wave tube amplifiers.
Carter, R. G., Bosch, W., Srivastava, V. & Gatti, G., 01/2001, In: IEEE Transactions on Electron Devices. 48, 1, p. 178-180 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Computer support environment applying object-oriented methods for hydraulic systems design.
da Silva, J. C. & Cheung, H. F., 1997, Computer aided conceptual design '97: proceedings of the 1997 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. (eds.). Lancaster: Lancaster University: Lancaster Engineering Design Centre, p. 117-131 15 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Computer support for engineering design - the schemebuilder project.
Bradley, D. A. & Bracewell, R. H., 1992, SERC/IMechE expert meeting on information technology and product design. St Albans, p. 69-73 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Computer-aided design tools for space TWTs.
Carter, R. G., Wang, P., Srivatava, V. & Sinha, A. K., 1994.
Research output: Contribution to conference - Without ISBN/ISSN › Other › peer-review
Published
Computer-aided property estimation of micro-particles in packed-beds for freeze-drying applications
Capozzi, L., Boccardo, G., Barresi, A. A. & Pisano, R., 2016.
Research output: Contribution to conference - Without ISBN/ISSN › Abstract › peer-review
Published
Computerised curve deconvolution of TL/OSL curves using a popular spreadsheet program
Afouxenidis, D., Polymeris, G. S., Tsirliganis, N. C. & Kitis, G., 1/05/2012, In: Radiation Protection Dosimetry. 149, 4, p. 363-370 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Concealed nuclear material identification via combined fast-neutron/gamma-ray computed tomography (FNGCT): a Monte Carlo study
Licata, M. & Joyce, M. J., 9/02/2018, In: Journal of Instrumentation. 13, 2, 16 p., P02013.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Concentrated photovoltaic thermal systems: A component-by-component view on the developments in the design, heat transfer medium and applications
George, M., Pandey, A. K., Abd Rahim, N., Tyagi, V. V., Shahabuddin, S. & Rahman, S., 15/04/2019, In: Energy Conversion and Management. 186, p. 15-41 27 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Concentrations and fluxes of dissolved organic carbon in UK topsoils.
Buckingham, S., Tipping, E. & Hamilton-Taylor, J., 15/12/2008, In: Science of the Total Environment. 407, 1, p. 460-470 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Unpublished
Conceptual design and development of a navigation system for a mobile robot
Chandler, A., Yavuz, H., Bradshaw, A. & Seward, D., 05/1999, (Unpublished) Lancaster University.
Research output: Thesis › Doctoral Thesis
Published
Conceptual design and development of a navigation system for a mobile robot.
Yavuz, H., Chandler, A., Bradshaw, A. & Seward, D. W., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 65-85 21 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Conceptual design and modelling of a domestic mobile robot.
Yavuz, H. & Bradshaw, A., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 15-35 21 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Conceptual design of a 1MW 175MHz CW magnetron.
Carter, R. G., 04/2009, 2009 IEEE International Vacuum Electronics Conference. Piscataway, NJ, USA: IEEE, 566 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Conceptual design of a high reactive-power ferroelectric fast reactive tuner
Ben-Zvi, I., Burt, G., Castilla, A., Macpherson, A. & Shipman, N., 10/05/2024, In: Physical Review Accelerators and Beams. 27, 5, 052001.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Conceptual evaluation of an integrated CCU technology based on Na-salts pH swing mineral carbonation
Bagnato, G. & Sanna, A., 31/12/2022, In: Journal of CO2 Utilization. 66, 10 p., 102286.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Concurrent engineering: a taxonomy of techniques.
Chua, L., Oh, K. S. V., Bradley, D. A. & Dawson, D., 1993, Proceedings of the 2nd international conference on computer integrated manufacturing (ICCIM '93). Winsor, J. & Gay, R. (eds.). Singapore, p. 265-270 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Condition Monitoring and Anomaly Detection of Wind Turbines Using Temporal Convolutional Informer and Robust Dynamic Mahalanobis Distance
Chen, W., Zhou, H., Cheng, L. & Xia, M., 30/11/2023, In: IEEE Transactions on Instrumentation and Measurement. 72, p. 1-14 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Condition monitoring of rotating machines using vibration and bearing temperature measurements
Nembhard, A., Sinha, J., Pinkerton, A. & Elbhbah, K., 2014, Advances in Condition Monitoring of Machinery in Non-stationary Operations: Proceedings of the 3rd International Conference on Condition Monitoring of Machinery in Non-Stationary Operations (CMMN02013). Dalpiaz, G., Rubini, R., D'Elia, G., Cocconcelli, M., Chaari, F., Zimroz, R. & Bartelmus, W. (eds.). Berlin: Springer Verlag, p. 159-169 11 p. (Lecture Notes in Mechanical Engineering).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Condition monitoring of wind turbine using novel deep learning method and dynamic kernel principal components Mahalanobis distance
Chen, W., Zhou, H., Cheng, L., Liu, J. & Xia, M., 31/10/2023, In: Engineering Applications of Artificial Intelligence. 125, 106757.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Condition monitoring of wind turbines based on extreme learning machine
Qian, P., Ma, X. & Wang, Y., 12/09/2015, ICAC2015: Proceedings of the 21st International Conference on Automation and Computing. IEEE, p. 37-42 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Condition monitoring of wind turbines based on spatial-temporal feature aggregation networks
Zhan, J., Wu, C., Yang, C., Miao, Q., Wang, S. & Ma, X., 1/11/2022, In: Renewable Energy. 200, p. 751-766 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Conducting polymers: New arena in dye-sensitized solar cells
Mazlan, N. A., Shahabuddin, S., Baharin, S. N. A., Pandey, A. K. & Saidur, R., 5/09/2018, 5th IET International Conference on Clean Energy and Technology (CEAT2018). IET
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Conducting polymers as a functional recognition interface to design sensors for pathogen and cancer diagnosis
Karasu, T., Armutcu, C., Elkhoury, K., Özgür, E., Maziz, A. & Uzun, L., 30/06/2024, In: TrAC Trends in Analytical Chemistry. 175, 117705.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Configuration of Coupling Methanol Steam Reforming over Cu-Based Catalyst in a Synthetic Palladium Membrane for One-Step High Purity Hydrogen Production
Wang, C., Weng, J., Liao, M., Luo, Q., Luo, X., Tian, Z., Shu, R., Chen, Y. & Du, Y., 30/06/2023, In: Journal of the Energy Institute. 108, 101245.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Conformal High Gain Aperture Antenna Based on Leaky-Wave Array for CubeSat Communication
Li, X., Wang, L., Wang, J. & Goussetis, G., 5/04/2021, 2020 International Symposium on Antennas and Propagation (ISAP). IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Consensus-based Hierachical Demand Side Management in Microgrid
Ma, J. & Ma, X., 11/11/2019, 2019 25th IEEE International Conference on Automation & Computing (ICAC). IEEE, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Constitutive models for temperature-, strain rate- and time-dependent behaviors of ionomers in laminated glass
Yang, J., Zhao, C., Zhang, Y., Wang, X.-E., Wang, Y. & Xie, D., 28/02/2023, In: Journal of Materials Science. 58
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Constrained Motion Planning for Safe Operation of a Vision-Based Laser Cutting Manipulator
Ma, S., Zabihifar, S. & Montazeri, A., 12/04/2024.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Constrained optimization of the shape of a wave energy collector by genetic algorithm
McCabe, A., 03/2013, In: Renewable Energy. 51, n/a, p. 274-284 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Constraint handling for state dependent parameter models.
Exadaktylos, V., Taylor, C. J. & Chotai, A., 2008, Proceedings of the UKACC International Conference on Control.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1...10 11 12 13 14 15 16 17 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us