School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

5101 - 5200 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Author last name

Published
Robot excavator.
Seward, D. W., 1992, IEE computing and control colloquium on telerobotically controlled mobil vehicles. London, p. 5/1-5/3
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Robots in construction.
Seward, D. W., 1992, In: Industrial Robot: An International Journal. 19, 3, p. 25-29 5 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Controlling an intelligent excavator for autonomous digging in difficult ground.
Seward, D. W., Bradley, D. A., Mann, J. E. & Goodwin, M. R., 1992, 9th international symposium on automation and robotics in construction. Tokyo
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Automating the construction workplace: positioning and navigational factors.
Seward, D. W., 1/01/2002, In: Construction Innovation: Information, Process, Management. 2, 3, p. 167-189 23 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Graphical programming and the development of construction robots.
Seward, D. W. & Zeid, K., 01/2004, In: Computer-Aided Civil and Infrastructure Engineering. 19, 1, p. 64-80 17 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Safe and effective navigation of autonomous robots in hazardous environments.
Seward, D. W., Agate, R. & Pace, C., 04/2007, In: Autonomous Robots. 22, 3, p. 223-242 20 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Control architecture characteristics for intelligence in autonomous mobile construction robots.
Seward, D., Agate, R. Y., Bakari, M. & Pace, C. M., 2006, Proceedings of the 24th international symposium on automation and robotics in construction.. p. 846-851 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Emotions modelling for safe behaviour generation in robotic systems.
Seward, D., Agate, R. Y. & Pace, C. M., 2006, Proceeding of the European safety and reliability conference (ESREL 2006).. p. 93-99 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Implementation issues for safe behaviour in robotic systems.
Seward, D. W., Pace, C. M. & Agate, R. Y., 2006, Proceeding of the European safety and reliability conference (ESREL 2006)..
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
SME expectations and experiences
Seward, D., Quayle, S., Rennie, A. & Taylor, S., 2005. 0 p.
Research output: Contribution to conference - Without ISBN/ISSN › Speech
Published
Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys
Sezer, H. K., Li, L., Schmidt, M., Pinkerton, A. J., Anderson, B. & Williams, P., 12/2006, In: International Journal of Machine Tools and Manufacture. 46, 15, p. 1972-1982 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An investigation into delamination mechanisms in inclined laser drilling of thermal barrier coated aerospace superalloys
Sezer, H. K., Pinkerton, A. J., Li, L. & Byrd, P., 2005, In: Journal of Laser Applications. 17, 4, p. 225-234 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
The sower's way: quantifying the narrowing net-energy pathways to a global energy transition
Sgouridis, S., Csala, D. & Bardi, U., 7/09/2016, In: Environmental Research Letters. 11, 9, 8 p., 094009.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A framework for defining sustainable energy transitions: principles, dynamics, and implications
Sgouridis, S. & Csala, D., 2/05/2014, In: Sustainability. 6, 5, p. 2601-2622 22 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Comparative net energy analysis of renewable electricity and carbon capture and storage
Sgouridis, S., Carbajales-Dale, M., Csala, D., Chiesa, M. & Bardi, U., 8/04/2019, In: Nature Energy. 4, p. 456–465 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Proportional-integral-plus control of a class of nonlinear systems using exact and partial linearisation by feedback.
Shaban, E. M. & Taylor, C. J., 2005, Proceedings of the international conference on automatic control and system engineering (ACSE-05).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Nonlinear control system design for construction robots: estimation, partial linearization by feedback and state-dependent-parameter control.
Shaban, E. M., Zied, K., Taylor, C. J. & Seward, D. W., 2005, Proceedings of the 22nd international symposium on automation and robotics in construction (ISARC-05).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
State dependent parameter proportional-integral-plus (SDP-PIP) control of a nonlinear robot digger arm.
Shaban, E. M., Taylor, C. J. & Chotai, A., 2004, Proceedings of the UKACC international conference on control. 59 ed.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Development of an automated verticality alignment system for a vibro-lance
Shaban, E. M., Ako, S., Taylor, C. J. & Seward, D. W., 07/2008, In: Automation in Construction. 17, 5, p. 645-655 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Exact linearization by feedback of state dependent parameter models applied to a mechatronics demonstrator
Shaban, E. M., Nada, A. A. & Taylor, C. J., 07/2014, 10th UKACC International Control Conference. Loughborough, 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An in situ electrochemical quartz crystal microbalance study of polycrystalline gold electrodes in nitric acid solution
Shackleford, S. G. D., Boxall, C., Port, S. N. & Taylor, R. J., 13/12/2002, In: Journal of Electroanalytical Chemistry. 538-539, p. 109-119 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Study of wettability and cell viability of H implanted stainless steel
Shafique, M. A., Ahmad, R. & Rehman, I. U., 9/03/2018, In: MATERIALS RESEARCH EXPRESS. 5, 3, 5 p., 036509.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Review of Smart City Energy Modeling in Southeast Asia
Shafiullah, M., Rahman, S., Imteyaz, B., Aroua, M. K., Hossain, M. I. & Rahman, S. M., 26/12/2022, In: Smart Cities. 6, 1, p. 72-99 28 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of Melt Pool Variables and Process Parameters in Laser Direct Metal Deposition of Aerospace Alloys
Shah, K., Pinkerton, A. J., Salman, A. & Li, L., 2010, In: Materials and Manufacturing Processes. 25, 12, p. 1372-1380 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Direct diode laser deposition of functionally graded Ti-6AL-4V and inconel 718 components
Shah, K., Pinkerton, A. J., Moat, R., Li, L. & Preuss, M., 2008, Proceedings of the 3rd Pacific International Conference on Applications of Lasers and Optics (PICALO). Laser Institute of America, p. 273-278 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
The significance of melt pool variables in laser direct deposition of functionally graded aerospace alloys
Shah, K., Salman, A., Pinkerton, A. J. & Li, L., 2009, Proceedings of the 28th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 569-576 8 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Parametric study of development of inconel-steel functionally graded materials by laser direct metal deposition
Shah, K., ul Haq, I., Khan, A., Shah, S. A., Khan, M. & Pinkerton, A., 02/2014, In: Materials and Design. 54, p. 531-538 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microfabrication of flexible large-area terahertz fishnet metamaterials
Shah, C. M., Sriram, S., Bhaskaran, M., Khodasevych, I. E., Withayachumnankul, W., Ung, B. S. Y., Lin, H., Abbott, D. & Mitchell, A., 2011.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Acid catalysed synthesis of bioactive glass by evaporation induced self assembly method
Shah, A. T., Ain, Q., Chaudhry, A. A., Ahmad, S., Zarif, F., Siddiqi, S. A., bin Qasim, S., Goerke, O., Khan, A. S. & Rehman, I. U., 1/01/2018, In: Journal of Non-Crystalline Solids. 479, p. 1-8 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A study of the effect of precursors on physical and biological properties of mesoporous bioactive glass
Shah, A. T., Ain, Q., Chaudhry, A. A., Khan, A. F., Iqbal, B., Ahmad, S., Siddiqi, S. A. & Rehman, I., 1/02/2015, In: Journal of Materials Science. 50, 4, p. 1794-1804 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of calcium hydroxide on mechanical strength and biological properties of bioactive glass
Shah, A. T., Batool, M., Chaudhry, A. A., Iqbal, F., Javaid, A., Zahid, S., Ilyas, K., bin Qasim, S., Khan, A. F., Khan, A. S. & ur Rehman, I., 1/08/2016, In: Journal of the Mechanical Behavior of Biomedical Materials. 61, p. 617-626 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Tri-layered functionally graded membrane for potential application in periodontal regeneration
Shah, A. T., Zahid, S., Ikram, F., Maqbool, M., Chaudhry, A. A., Rahim, M. I., Schmidt, F., Goerke, O., Khan, A. S. & Rehman, I. U., 1/10/2019, In: Materials Science and Engineering C. 103, 7 p., 109812.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State of the art of UV water treatment technologies and hydraulic design optimisation using computational modelling
Shah, J., Zidonis, A. & Aggidis, G., 30/06/2021, In: Journal of Water Process Engineering. 41, 7 p., 102099.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns
Shah, A. A., Shahid, M., Hardy, J. G., Siddiqui, N. A., Kennedy, A. R., Gul, I. H., Rehman, S. U. & Nawab, Y., 27/05/2022, In: Crystals. 12, 6, 16 p., e781.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Intellectual Capital and Financial Performance: Does Board Size and Independent Directors Matter? An Empirical Enquiry
Shah, S. Q. A., Lai, F. W., Tahir, M., Shad, M. K., Hamad, S. & Ali, S. E. A., 26/03/2024, (E-pub ahead of print) In: Journal of Islamic Accounting and Business Research. 23 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Graphene oxide nano-layers functionalized/reduced by L-Citrulline/Pectin bio-molecules for epoxy nanocomposite coating mechanical properties reinforcement
Shahmoradi, A. R., Bejandi, M. S., Rasanani, E. H., Javidparvar, A. A. & Ramezanzadeh, B., 31/05/2023, In: Progress in Organic Coatings. 178
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A new synthetic methodology for the preparation of biocompatible and organo-soluble barbituric- and thiobarbituric acid based chitosan derivatives for biomedical applications
Shahzad, S., Shahzadi, L., Mahmood, N., Siddiqi, S. A., Rauf, A., Manzoor, F., Chaudhry, A. A., Rehman, I. U. & Yar, M., 1/09/2016, In: Materials Science and Engineering: A. 66, p. 156-163 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Development of K-doped ZnO nanoparticles encapsulated crosslinked chitosan based new membranes to stimulate angiogenesis in tissue engineered skin grafts
Shahzadi, L., Chaudhry, A. A., Aleem, A. R., Malik, M. H., Ijaz, K., Akhtar, H., Alvi, F., Khan, A. F., Rehman, I. U. & Yar, M., 1/12/2018, In: International Journal of Biological Macromolecules. 120, p. 721-728 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Triethyl orthoformate covalently cross-linked chitosan-(poly vinyl) alcohol based biodegradable scaffolds with heparin-binding ability for promoting neovascularisation
Shahzadi, L., Yar, M., Jamal, A., Siddiqi, S. A., Chaudhry, A. A., Zahid, S., Tariq, M., Rehman, I. U. & MacNeil, S., 1/06/2016, In: JOURNAL OF BIOMATERIALS APPLICATIONS. 31, 4, p. 582-593 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Thyroxine impregnated chitosan-based dressings stimulate angiogenesis and support fast wounds healing in rats: Potential clinical candidates
Shahzadi, L., Bashir, M., Tehseen, S., Zehra, M., Mehmood, A., Chaudhry, A. A., Rehman, I. U. & Yar, M., 1/10/2020, In: International Journal of Biological Macromolecules. 160, p. 296-306 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Synthesis and wound healing performance of new water-soluble chitosan derivatives
Shahzadi, L., Jamal, A., Hajivand, P., Mahmood, N., Anwar Chaudhry, A., ur Rehman, I. & Yar, M., 18/10/2021, (E-pub ahead of print) In: Journal of Applied Polymer Science.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An efficient new method for electrospinning chitosan and heparin for the preparation of pro‐angiogenic nanofibrous membranes for wound healing applications
Shahzadi, L., Ramzan, A., Anjum, A., Jabbar, F., Khan, A. F., Manzoor, F., Shahzad, S. A., Chaudhry, A. A., Rehman, I. U. & Yar, M., 20/12/2022, In: Journal of Applied Polymer Science. 139, 48, e53212.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Action conditional recurrent Kalman networks for forward and inverse dynamics learning
Shaj, V., Becker, P., Buchler, D., Pandya, H., van Duijkeren, N., Taylor, C. J., Hanheide, M. & Neumann, G., 18/11/2020, Proceedings of Machine Learning Research.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Robotics and Artificial Intelligence in the Nuclear Industry: From Teleoperation to Cyber Physical Systems
Shanahan, D., Wang, Z. & Montazeri, A., 31/03/2023, Artificial intelligence for Robotics and Autonomous Systems. Cham: Springer Nature, 43 p. (Studies in Computational Intelligence).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review
Published
A SU8 micromachined WR-1.5 band waveguide filter
Shang, X., Tian, Y., Lancaster, M. J. & Singh, S., 2013, In: IEEE Microwave and Wireless Components Letters. 23, 6, p. 300-302 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Selective laser sintering of calcium polyphosphate - Polyvinyl alcohol for biomedical applications
Shanjani, Y., Pinkerton, A. J. & Toyserkani, E., 2010, Proceedings of the 29th International Congress on Applications of Lasers and Electro-optics (ICALEO). Laser Institute of America, p. 489-494 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Investigation of the phase transformations in Ti-22Al-25Nb alloy
Shao, B., Zong, Y., Wen, D., Tian, Y. & Shan, D., 04/2016, In: Materials Characterization. 114, p. 75-78 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Intelligent fault diagnosis of rotor-bearing system under varying working conditions with modified transfer CNN and thermal images
Shao, H., Xia, M., Han, G., Zhang, Y. & Wan, J., 30/06/2020, (E-pub ahead of print) In: IEEE Transactions on Industrial Informatics.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fault diagnosis of a rotor-bearing system under variable rotating speeds using two-stage parameter transfer and infrared thermal images
Shao, H., Li, W., Xia, M., Zhang, Y., Shen, C., Williams, D., Kennedy, A. & De Silva, C. W., 10/09/2021, In: IEEE Transactions on Instrumentation and Measurement. 70, 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Modified Stacked Autoencoder Using Adaptive Morlet Wavelet for Intelligent Fault Diagnosis of Rotating Machinery
Shao, H., Xia, M., Wan, J. & de Silva, C. W., 28/02/2022, In: IEEE ASME Trans Mechatron. 27, 1, p. 24-33 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
An integrated diagnostic reconfiguration (IDR) technique for fault tolerant mixed signal microsystems.
Sharif, E., Dorey, A. P. & Richardson, A. M. D., 1998, Proceedings of the IEEE international circuits and systems symposium. IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Reconfigurable smart sensors for dependable systems
Sharif, E., Richardson, A. & Dorey, T., 1/11/1997, Hardware Systems for Dependable Applications (Digest No: 1997/335), IEE Half-Day Colloquium on. IEEE, p. 2/1 -2/6 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Dental materials for cleft palate repair
Sharif, F., Ur Rehman, I., Muhammad, N. & MacNeil, S., 1/04/2016, In: Materials Science and Engineering: A. 61, p. 1018-1028 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Bioresorbable antibacterial PCL-PLA-nHA composite membranes for oral and maxillofacial defects
Sharif, F., Tabassum, S., Mustafa, W., Asif, A., Zarif, F., Tariq, M., Siddiqui, S. A., Gilani, M. A., Rehman, I. U. & MacNeil, S., 1/04/2019, In: POLYMER COMPOSITES. 40, 4, p. 1564-1575 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Developing A Synthetic Composite Membrane For Cleft Palate Repair
Sharif, F., Roman, S., Asif, A., Gigliobianco, G., Ghafoor, S., Tariq, M., Siddiqui, S. A., Mahmood, F., Muhammad, N., Rehman, I. U. & MacNeil, S., 1/07/2019, In: Journal of Tissue Engineering and Regenerative Medicine. 13, 7, p. 1178-1189 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Incidence and management of cleft lip and palate in Pakistan
Sharif, F., Mahmood, F., Azhar, M. J., Asif, A., Zahid, M., Muhammad, N., Rehman, I. U. & Neil, S. M., 30/05/2019, In: Journal of the American Medical Informatics Association : JAMIA. 69, 5, p. 632-639 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Exploring PANI-TiN Nanoparticle Coatings in a PEFC Environment: Enhancing Corrosion Resistance and Conductivity of Stainless Steel Bipolar Plates
Sharma, S., Zhang, K., Gupta, G. & Santamaria, D. G., 7/08/2017, In: Energies. 10, 8, 13 p., 1152.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Polymer hydrogel-based microneedles for metformin release
Sharma, M., Kap, Ö., Abdelmohsen, H., Harper, G., Firlak, M., Aaltonen, J., Bolland, K., Bragg, R., Deeley, S., Francis, E., Kazi, N., Mapley, B., Oikonomou, V., Aljohani, A., Halcovitch, N., Cheneler, D., Kılıç, V., Horzum, N. & Hardy, J., 5/09/2022.
Research output: Contribution to conference - Without ISBN/ISSN › Poster › peer-review
Published
Poly(2-Hydroxyethyl Methacrylate) Hydrogel-Based Microneedles for Metformin Release
Sharma, M., Kap, Ö., Abdelmohsen, H., Ashton, M., Harper, G., Firlak, M., Aaltonen, J., Bolland, K., Bragg, R., Deeley, S., Francis, E., Kazi, N., Mapley, B., Oikonomou, V., Aljohani, A. D., Cheneler, D., Kılıç, V., Horzum, N. & Hardy, J., 31/08/2023, In: Global Challenges. 7, 8, p. 2300002 2300002.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Poly(2-Hydroxyethyl Methacrylate) Hydrogel-Based Microneedles for Bioactive Release
Sharma, M. B., Abdelmohsen, H. A. M., Kap, Ö., Kilic, V., Horzum, N., Cheneler, D. & Hardy, J. G., 25/06/2024, In: Bioengineering. 11, 7, 649.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Keynote address: mechatronics - the design challenge: an overview of the issues raised during the optimal design of mechatronic systems and products.
Sharpe, J., 1994, Mechatronics - the basis for a new industrial development. Acar, M., Makra, J. & Penney, E. (eds.). Southampton: Computational Mechanics Publications
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Application of bond graph methodology to concurrent conceptual design of interdisciplinary systems.
Sharpe, J. & Bracewell, R. H., 10/1993, Proceedings of IEEE/SSMC conference: 1993, International Conference on Systems, Man and Cybernetics, Le Touquet - France. Piscataway, NJ: IEEE, Vol. 1. p. 7-13 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Application of bond graphs in complex concurrent multi-disciplinary engineering design
Sharpe, J. & Goodwin, E. M., 1993, Proceedings of the 1993 international conference on bond graph modelling and simulation. San Diego: US Society for Computer Simulation, p. 7-13 7 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Quality control of dielectric loss in oil-filled EHV power cables.
Sharpe, J. & Milnes, A. J., 1993, Proceedings of the third international conference on power cables. London: IEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Modelling the potential of adsorbed hydrogen for use in aviation
Sharpe, J. E., Bimbo, N., Ting, V. P., Rechain, B., Joubert, E. & Mays, T. J., 06/2015, In: Microporous and Mesoporous Materials. 209, p. 135-140 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Supercritical hydrogen adsorption in nanostructured solids with hydrogen density variation in pores
Sharpe, J. E., Bimbo, N., Ting, V. P., Burrows, A. D., Jiang, D. & Mays, T. J., 04/2013, In: Adsorption-Journal of the International Adsorption Society. 19, 2, p. 643-652 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
New plasmonic materials based split ring resonators for high frequency applications
Sharples, E. & Letizia, R., 2013.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Wakefield excitation via metasurface-loaded waveguide
Sharples, E. & Letizia, R., 2014, Proceedings of IPAC2014, Dresden, Germany. Geneva: JACoW, p. 1437-1439 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
InSb grating for Smith-Purcell THz radiation
Sharples, E. & Letizia, R., 2014. 2 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Investigation of CSRR loaded waveguide for accelerator applications
Sharples, E. & Letizia, R., 11/2014, In: Journal of Instrumentation. 13 p., P11017.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimization studies on CSRR loaded waveguide for particle accelerator applications
Sharples, E. & Letizia, R., 2015, Abstracts 2015 IEEE International Conference on Plasma Sciences (ICOPS). IEEE, 1 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Electron beam excitation of CSRR loaded waveguide for Cherenkov radiation
Sharples, E. & Letizia, R., 1/09/2015, In: Proceedings of SPIE. 9544, 8 p., 95442L.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
THz Wakefield radiation generation via dielectric Bragg waveguide
Sharples, E. & Letizia, R., 2015, Advanced Electromagnetic Materials in Microwaves and Optics (METAMATERIALS), 2015 9th International Congress on. IEEE, p. 289-291 3 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Unpublished
Artificial engineered materials for novel accelerator applications
Sharples, E., 2016, (Unpublished) Lancaster University. 210 p.
Research output: Thesis › Doctoral Thesis
Published
Design considerations on complementary split ring resonator-loaded waveguides for Wakefield generation
Sharples, E. & Letizia, R., 12/2016, In: IEEE Transactions on Plasma Science. 44, 12, p. 3281-3287 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Wakefield excitation via a metasurface-loaded waveguide
Sharples, E. & Letizia, R., 1/07/2014, IPAC 2014: Proceedings of the 5th International Particle Accelerator Conference. Joint Accelerator Conferences Website (JACoW), p. 1437-1439 3 p. (IPAC 2014: Proceedings of the 5th International Particle Accelerator Conference).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Protein adsorption capability on polyurethane and modified-polyurethane membrane for periodontal guided tissue regeneration applications
Sheikh, Z., Khan, A. S., Roohpour, N., Glogauer, M. & Rehman, I. U., 1/11/2016, In: Materials Science and Engineering: A. 68, p. 267-275 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Non-linear FEM for RC shear wall structures
Shen, P., Ye, J. & Cai, S., 1999, Developments in Analysis & Design Using FEM: 7th Int. Conf. Civil. Struct. Eng., Oxford. Topping, B. H. V. & Kumar, B. (eds.). Stirling: Civil-Comp Press, p. 181-186 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Discovery of marageing steels: machine learning vs. physical metallurgical modelling
Shen, C., Wang, C., Rivera-Díaz-del-Castillo, P. E. J., Xu, D., Zhang, Q., Zhang, C. & Xu, W., 10/10/2021, In: Journal of Materials Science and Technology. 87, 10, p. 258-268 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Special features on continuous learning based condition monitoring for crucial components
Shen, C., Li, X., Xia, M., Williams, D. & Martínez García, M., 1/05/2024, In: Measurement Science and Technology. 35, 5, 4 p., 050101.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
E-pub ahead of print
Microstructure and mechanical properties of controlled low-strength materials with recycled coarse aggregate and metro shield spoil for backfill applications
Shen, J., She, Z., Xu, X., Sun, W. & Chen, G., 30/09/2025, In: Materials Today Sustainability. 31, 101162.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Microstructure effects on transverse cracking in composite laminae by DEM
Sheng, Y., Yang, D., Tan, Y. & Ye, J., 30/11/2010, In: Composites Science and Technology. 70, 14, p. 2093-2101 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State space solution for thick laminated piezoelectric plates with clamped and electric open-circuited boundary conditions
Sheng, H. Y., Wang, H. & Ye, J. Q., 09/2007, In: International Journal of Mechanical Sciences. 49, 7, p. 806-818 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State space solution for axisymmetric bending of angle-ply laminated cylinder with clamped edges
Sheng, H. Y. & Ye, J. Q., 04/2005, In: Composite Structures. 68, 1, p. 119-128 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A three-dimensional state space finite element solution for laminated composite cylindrical shells
Sheng, H. Y. & Ye, J. Q., 2003, In: Computer Methods in Applied Mechanics and Engineering. 192, 22-24, p. 2441-2459 19 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A semi-analytical finite element for laminated composite plates
Sheng, H. Y. & Ye, J. Q., 07/2002, In: Composite Structures. 57, 1-4, p. 117-123 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
A state space finite element for laminated composite plates
Sheng, H. Y. & Ye, J. Q., 16/08/2002, In: Computer Methods in Applied Mechanics and Engineering. 191, 37-38, p. 4259-4276 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Free-edge effect in cross-ply laminated plates under a uniform extension
Sheng, H. Y. & Ye, J. Q., 09/2004, In: Structural Engineering and Mechanics. 18, 3, p. 377-388 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
State variable method for transient heat conduction analysis of composite sold cylinder
Sheng, H. Y., Li, H. P., Ye, J. Q. & Wu, X. T., 1/02/2011, In: Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University. 45, 2, p. 247-251 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Hydrodynamic studies of floating structures: Comparison of wave-structure interaction modelling
Sheng, W., Tapoglou, E., Ma, X., Taylor, C. J., Dorrell, R. M., Parsons, D. R. & Aggidis, G., 1/04/2022, In: Ocean Engineering. 249, 16 p., 110878.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Time‐Domain Implementation and Analyses of Multi‐Motion Modes of Floating Structures
Sheng, W., Tapoglou, E., Ma, X., Taylor, C. J., Dorrell, R. M., Parsons, D. R. & Aggidis, G., 13/05/2022, In: Journal of Marine Science and Engineering (JMSE). 10 , 5, 24 p., 662.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Fundamentals of Wave Energy Conversions: The Dynamics of the wave-structure interaction and wave energy optimisation
Sheng, W. & Aggidis, G., 18/09/2022, Eliva Press. 433 p.
Research output: Book/Report/Proceedings › Book
Published
Hydrodynamic comparisons of TALOS Wave energy converter using panel methods
Sheng, W. & Aggidis, G., 22/06/2023, ISOPE 2023. ISOPE, p. 597-604 8 p. 247
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
A Development and validation of the in-house hydrodynamics code and the DNV software for TALOS wave energy converter
Sheng, W., Michailides, C., Loukogeorgaki, E. & Aggidis, G., 2/09/2023, p. 1-8. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Implementation of a time-domain model for TALOS wave energy converter
Sheng, W., Michaelides, C., Loukogeorgaki, E. & Aggidis, G., 2/09/2023, p. 460-1 - 460-8. 8 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Optimizations for improving energy absorption of TALOS WEC
Sheng, W. & Aggidis, G., 17/06/2024, Proceedings of the Thirty-fourth (2024) International Ocean and Polar Engineering Conference. p. 608-615 8 p. 190-2024-TPC-0662
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
An Experimental Study of a Conventional Cylindrical Oscillating Water Column Wave Energy Converter: Fixed and Floating Devices
Sheng, W. & Aggidis, G., 22/01/2025, In: Energies. 18, 3, 500.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Optimizations for Improving Energy Absorption of TALOS Wave Energy Converter
Sheng, W. & Aggidis, G., 30/06/2025, In: International Journal of Offshore and Polar Engineering . 35, 2, p. 177-185 9 p., 2.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of pH, polymer concentration and molecular weight on the physical state properties of tolfenamic acid
Sheraz, M. A., Ahmed, S. & Rehman, I. U., 2015, In: Pharmaceutical Development and Technology. 20, 3, p. 352-360 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Efficient interference mitigation in mmWave backhaul network for high data rate 5G wireless communications
Shi, J., Ni, Q., Paoloni, C. & Magne, F., 09/2016, Proceedings of the 12th International Conference on Wireless Communications, Networking and Mobile Computing (WiCOM2016). London: IET Press, p. 382-387 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review

Previous 1...48 49 50 51 52 53 54 55 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us