Home > Research > School of Engineering > Publications & Outputs
View graph of relations
  1. Chapter (peer-reviewed)
  2. Published

    RF Systems

    Calaga, R., Baudrenghien, P., Burt, G., Capatina, O., Jensen, E., Montesinos, E. & Ratti, A., 29/02/2024, The High Luminosity Large Hadron Collider: New Machine for Illuminating the Mysteries of the Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, p. 199-224 26 p. (Advanced Series on Directions in High Energy Physics).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  3. Published

    Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security

    Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  4. Published

    Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles

    Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  5. Published

    Robotics and Artificial Intelligence in the Nuclear Industry: From Teleoperation to Cyber Physical Systems

    Shanahan, D., Wang, Z. & Montazeri, A., 31/03/2023, Artificial intelligence for Robotics and Autonomous Systems. Cham: Springer Nature, 43 p. (Studies in Computational Intelligence).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  6. Published

    Real-Time Defect Detection of Die Cast Rotor in EV Induction Motor Based on Circular Flux Sensing Coils

    Zhu, Q., Wang, X., Wang, H., Xia, M., Cao, W. & Lu, S., 30/11/2022, Advanced Sensors and Sensing Technologies for Electric Vehicles. Cao, W. & Lu, S. (eds.). AIP Publishing, p. 1-26 26 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  7. Published

    Virtual workshops using Microsoft Teams

    Roberts, J. & Munday, D., 20/07/2022, 100 Ideas for Active Learning. Oprandi, P. & Betts, T. (eds.). University of Sussex Library, p. 865-872 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  8. Published

    Microsoft SharePoint integration within Teams for delivery of lecture content

    Munday, D. & Roberts, J., 20/07/2022, 100 Ideas for Active Learning. Oprandi, P. & Betts, T. (eds.). Brighton: University of Sussex Library, p. 857-864 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  9. Forthcoming

    Event-based Robust Control Techniques for Wheel-Based Robots Under Cyber-attack and Dynamic Quantizer

    Saeedi, M., Zarei, J., Seif, M. & Montazeri, A., 2022, (Accepted/In press) Mobile Robots: Motion Control and Path Planning. Cham: Springer Nature, 35 p. (Studies in Computational Intelligence).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  10. Published

    Vacuum Electronic Devices

    Paoloni, C., 8/12/2021, THz Communications: Paving the Way Towards Wireless Tbps. Kürner, T., Mittleman, D. M. & Nagatsuma, T. (eds.). Cham: Springer, p. 317-327 11 p. (Springer Series in Optical Sciences; vol. 234).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  11. Published

    ULTRAWAVE

    Paoloni, C., 8/12/2021, THz Communications: Paving the Way Towards Wireless Tbps. Kürner, T., Mittleman, D. M. & Nagatsuma, T. (eds.). Cham: Springer, p. 423-425 3 p. (Springer Series in Optical Sciences; vol. 234).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  12. Published

    Terahertz Front End Technology and Deployment for Ultra-High Capacity Links

    Magne, F., Le, T., Llorente, R., Paoloni, C. & Ramirez, A., 11/08/2021, Next Generation Wireless Terahertz Communication Networks. Ghafoor, S., Husain Rehmani, M. & Davy, A. (eds.). London: CRC Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  13. Published

    Unmanned Aerial Systems: Autonomy, Cognition and Control

    Montazeri, A., Can, A. & Imran, I., 21/01/2021, Unmanned Aerial Systems: Theoretical Foundation and Applications. Koubaa, A. & Taher Azar, A. (eds.). Elsevier, p. 47-80 34 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  14. Published

    Community-University Research: A Warts and All Account

    Whittle, J., Ferrario, M. A. & Simm, W., 1/01/2020, Into the Wild: Beyond the Design Research Lab. Chamberlain, A. & Crabtree, A. (eds.). Springer International Publishing, p. 115-147 33 p. (Studies in Applied Philosophy, Epistemology and Rational Ethics ; vol. 48).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  15. Published

    Case study on Resource Recovery: linking renewable energy, waste management and sustainable agriculture

    Semple, K., Marshall, R., Lag Brotons, A., Herbert, B. & Hurst, L., 12/2018, From waste to resource productivity: Evidence and case studies. p. 39-50 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  16. Published

    Hydrogen Production for PEM Fuel Cells

    Basile, A., Iulianelli, A., Bagnato, G. & Dalena, F., 11/11/2015, Production of Hydrogen from Renewable Resources. Springer, p. 315-338 24 p. (Biofuels and Biorefineries).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  17. Published

    Monitoring degradation in the field

    Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M., 30/12/2014, The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  18. Published

    The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications

    Lupeanu, M., Rosu, M-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  19. Published

    Testing of pultruded GFRP materials and structures for civil engineering

    Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)peer-review

  20. Published

    An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

    Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  21. Published

    Semiconductor photocatalysis and metal deposition

    Bromley, M. & Boxall, C., 03/2012, Advances in Chemistry Research. Taylor, J. C. (ed.). Nova Science Publishers, Vol. 13.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  22. Published

    Opportunities offered by additive manufacturing in creative businesses: informing designers

    Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  23. Published

    Use of FDM in an undergraduate student project: design, build and test a model wind turbine

    Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  24. Published

    Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

    Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  25. Published

    Templates for consumer use in designing customised products

    Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  26. Published

    Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products

    Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  27. Published

    The application of rapid manufacturing technologies in the spare parts industry

    Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  28. Published

    Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

    Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  29. Published

    Virtual Trading System for Rapid Manufactured Products

    Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  30. Published

    Design templates for consumer use in customising additive layer manufactured products

    Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  31. Published

    Test of A/D Converters

    Richardson, A. & Lechner, A., 2008, Test & Diagnostics of Analogue, Mixed Signal & RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 213-234 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  32. Published

    Phase Locked Loop Test Methodology

    Richardson, A. & Burbidge, M., 2008, Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 277-306 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  33. Published

    Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

    Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  34. Published

    From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent

    Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  35. Published

    The applications of photocatalytic waste minimisation in nuclear fuel processing

    Boxall, C., Le Gurun, G., Taylor, R. J. & Xiao, S., 2005, Handbook of Environmental Chemistry. Huntzinger, O. (ed.). Berlin: SPRINGER-VERLAG BERLIN, Vol. 2. p. 451-481 31 p. (Handbook of Environmental Chemistry ; vol. 2).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  36. Published

    An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

    Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  37. Published

    Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

    Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  38. Published

    Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

    Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  39. Published

    Surface Flatness Measurement in Stereolithography

    Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  40. Published

    A system for the generation of liquid metal droplets using electromotive forces

    Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  41. Published

    The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools

    Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  42. Published

    Rapid prototyping using electrodeposition of copper

    Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  43. Published

    Analytical solutions of composite plate and shell structures and their engineering applications

    Ye, J., 1996, Advances in Applied Mechanics Research in the UK. Beijing: Science Press

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  44. Published

    Three-dimensional buckling analysis of orthotropic cylinders subjected to thermo-mechanical loadings.

    Soldatos, K. P. & Ye, J., 1995, Homogeneity and Nonlinearity in Solid Mechanics . Parker, D. F. & England, A. H. (eds.). Kluwer Academic Publishers, (Solid Mechanics and Its Applications; vol. 39).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  45. Published

    The Photoelectrophoresis of Colloidal Iron Oxides I: Hematite (alpha-Fe2O3)

    Boxall, C., Zhang, Z. & KELSALL, G. H., 1993, Colloids in the Aquatic Environment. Thadros, T. & Gregory, J. (eds.). Amsterdam: Elsevier Science Ltd., p. 145-163 19 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter (peer-reviewed)

  46. Chapter
  47. Published

    Destilación (II): Destilación flash

    Moure Abelenda, A. & Feijoo Costa, G. (ed.), 1/05/2023, Destilación (II): Destilación flash. Feijoo, G. & Moure Abelenda, A. (eds.). Madrid: Notas de Enxeñaría Química, Vol. 11. p. 26 - 34

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  48. Published

    Raman spectroscopy and machine learning for diagnosis and monitoring of cancer

    Greenop, M., Meza Ramirez, C. A. & Rehman, I. U., 28/02/2023, Optical Spectroscopy and Imaging for Cancer Diagnostics: Fundamentals, Progress, and Challenges. Melikechi, N. (ed.). World Scientific Publishing, p. 256-298 43 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  49. Published

    Materials and Processing

    Kennedy, A. & Shipway, P., 27/12/2022, Introduction to Mechanical Engineering: Part 1. Clifford, M. (ed.). London: Routledge, p. 89-184 96 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  50. Published

    4.11 - Biological and Microbial Fuel Cells

    Da Li, L., Şahin, S., Izadi, P., Ghangrekar, M., Duteanu, N. M., Erable, B., Scott, K. & Yu, E. H., 2/03/2022, Comprehensive Renewable Energy, Second Edition: Volume 1-9. Elsevier, Vol. 1-4. p. 290-316 27 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  51. Published

    Powder Characterization – Methods, Standards and State of the Art

    Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  52. Published

    Acoustic Monitoring of Joint Health

    Spain, L. & Cheneler, D., 17/03/2021, Data Acquisition: Recent Advances and Applications in Biomedical Engineering. Płaczek, B. (ed.). InTech

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  53. Published

    Control Structures of Grid-Tied Photovoltaic Systems

    Niroomand, M. & Nasr Esfahani, F., 10/02/2021, Energy Conversion Systems: An Overview. Tripathi, S. M. & Padmanaban, S. (eds.). New York: Nova Science Publishers, p. 59-133 75 p. (Energy Science, Engineering and Technology ).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  54. Published

    Converter Technologies for PV Systems: A Comprehensive Review

    Niroomand, M. & Nasr Esfahani, F., 10/02/2021, Energy Conversion Systems: An Overview. Tripathi, S. M. & Padmanaban, S. (eds.). New York: Nova Science Publishers, p. 1-58 58 p. (Energy Science, Engineering and Technology ).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  55. Published

    Nanocellulose-based sustainable microwave absorbers to stifle electromagnetic pollution

    Pai, A., Paoloni, C. & Thomas, S., 9/10/2020, Nanocellulose Based Composites for Electronics. Elsevier, p. 237-258 22 p. (Micro and Nano Technologies).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  56. Published

    Adding Value to Digestate and Ash (the AVAnD project): elucidating the role and the value of alternative fertilisers on the soil-plant system

    Lag Brotons, A., Marshall, R., Herbert, B., Hurst, L., Inam, E. J. & Semple, K., 2020, Resource Recovery from Wastes: Towards a Circular Economy. Macaskie, L. E., Sapsford, D. J. & Mayes, W. M. (eds.). London: Royal Society of Chemistry, 28 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  57. Published

    From bioenergy by-products to alternative fertilisers: pursuing circular economy

    Marshall, R., Lag Brotons, A., Inam, E. J., Herbert, B., Hurst, L. & Semple, K., 30/10/2019, Resource Recovery from Wastes: Towards a Circular Economy. Macaskie, L. E., Sapsford, D. J. & Mayes, W. M. (eds.). London: Royal Society of Chemistry, p. 287-314 28 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  58. Published

    Drawbacks of Batch Processing, Current Status, and Perspectives

    Pisano, R., Capozzi, L. C. & Corver, J. AWM., 24/10/2019, Continuous Manufacturing in Lyophilization of Pharmaceuticals. CRC Press ed. Routledge, 20 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  59. Published

    Mid-infrared Light Emitting Diodes

    Krier, A., Repiso Menendez, E., Al-Saymari, F., Carrington, P., Marshall, A., Lu, Q., Krier, S., Lulla Ramrakhiyani, K., Steer, M., MacGregor, C., Broderick, C., Arkani, R., O'Reilly, E., Sorel, M., Molina, S. & de la Mata, M., 18/10/2019, Mid-infrared Optoelectronics Materials, Devices, and Applications. Tournié, E. & Cerutti, L. (eds.). Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  60. Published

    Incorporation of nanoparticles in glass ionomer cements: Clinical applications, properties, and future perspectives

    Khan, A. S., Khan, R. S., Khan, M. & Rehman, I. U., 13/04/2019, Nanobiomaterials in Clinical Dentistry. 2nd ed ed. Elsevier, p. 113-138 26 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  61. Published

    Harmonic balance Navier-Stokes analysis of tidal stream turbine wave loads

    Cavazzini, A., Campobasso, M. S., Marconcini, M., Pacciani, R. & Arnone, A., 1/03/2019, Recent Advances in CFD for Wind and​ Tidal Offshore Turbines: Springer Tracts in Mechanical Engineering. Ferrer, E. & de Montflaur, A. (eds.). 2nd ed. ed. Cham: Springer International Publishing, p. 37-49 13 p. (Springer Tracts in Mechanical Engineering).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  62. Published

    Membrane considerations and plant design for pre-combustion CO2 capture

    Bagnato, G. & Sanna, A., 12/10/2018, Current Trends and Future Developments on (Bio-) Membranes. Basile, A. & Favvas, E. P. (eds.). Elsevier, p. 415-435 21 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  63. Published

    Energy auditing

    Allouhi, A., Boharb, A., Rahman, S., Kousksou, T. & Jamil, A. M., 28/03/2018, Comprehensive Energy Systems. Dincer, I. (ed.). London: Elsevier

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  64. Published

    Introduction: Environment, planning and land use

    Kivell, P., Roberts, P. & Walker, G., 1/01/2018, Environment, Planning and Land Use. Taylor and Francis, p. 1-7 7 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  65. Published

    Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors, Volume 50: Imaging Gas Flow in Gas–Solid Catalytic Systems by Near-Infrared Tomography

    Aiouache, F., 17/11/2017, Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors. Dixon, A. & Deutschmann, O. (eds.). Academic Press, p. 203-280 78 p. (Advances in Chemical Engineering; vol. 50).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  66. Published

    Imaging Gas Flow in Gas–Solid Catalytic Systems by Near-Infrared Tomography

    Aiouache, F., 15/11/2017, Advances in Chemical Engineering. Academic Press Inc., p. 203-280 78 p. (Advances in Chemical Engineering; vol. 50).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  67. Published

    Bio fuel: Environmentally benign biodiesel production from renewable sources

    Abidin, SZ. & Saha, B., 11/09/2017, The Water-Food-Energy Nexus: Processes, Technologies, and Challenges. Mujtaba, I. M., Srinivasan, R. & Elbashir, N. O. (eds.). Boca Raton, Fla.: CRC Press, p. 333-364 32 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  68. Published

    Fixed bed membrane reactors for ultrapure hydrogen production: Modeling approach

    Alavi, M., Iulianelli, A., Rahimpour, M. R., Eslamloueyan, R., Falco, M. D., Bagnato, G. & Basile, A., 1/01/2017, Hydrogen Production, Separation and Purification for Energy.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  69. Published

    Application of nanomaterials in dentistry: Micro and Nanomanufacturing

    Qasim, S. B. & Rehman, I. U., 2017, Micro and Nanomanufacturing. Springer International Publishing, Vol. 2. p. 319-336 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  70. Published

    Therapeutic applications of nanotechnology in dentistry: Nanostructures for Oral Medicine

    Zafar, M. S., Khurshid, Z., Najeeb, S., Zohaib, S. & Rehman, I. U., 2017, Nanostructures for Oral Medicine: Micro and nano technologies. Elsevier Inc., p. 833-862 30 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  71. Published

    Delivering a low-carbon electricity system in a liberalised market

    Kemp, R. J., 07/2016, Delivering Energy Law and Policy in the EU and the US: a reader. Heffron, R. & Little, G. (eds.). Edinburgh: Edinburgh University Press, p. 163-171 9 p. 32

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  72. Published

    Greener and sustainable approach for the synthesis of commercially important epoxide building blocks using polymer-supported Mo(VI) complexes as catalysts

    Mohammed, ML. & Saha, B., 10/05/2016, Ion Exchange and Solvent Extraction: A Series of Advances. Sengupta, A. K. (ed.). Boca Raton: CRC Press, Vol. 22. p. 65-97 33 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  73. Published

    Quantitative risk management and its limits: a UK engineering perspective

    Kemp, R. J., 2016, Routeledge Handbook of Risk Studies. Burgess, A., Alemanno, A. & Zinn, J. O. (eds.). London: Routledge, p. 164-176 13 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  74. Published

    Crab Cavity Development

    Burt, G. C., 10/2015, The High Luminosity Large Hadron Collider: The New Machine for Illuminating the Mysteries of Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, (Advanced Series on Directions in High Energy Physics; vol. 24).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  75. Published

    Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms

    Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  76. Published

    Harnessing the selective catalytic action of supported gold in hydrogenation applications

    Wang, X., Li, M. & Keane, M. A., 2014, Heterogeneous Gold Catalysts and Catalysis. Ma, Z. & Dai, S. (eds.). Royal Society of Chemistry (Great Britain), p. 424-461 38 p. (RSC Catalysis Series).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  77. Published

    Linear and nonlinear non-minimal state space control system design

    Taylor, C. J., Chotai, A. & Tych, W., 1/10/2013, System Identification, Environmental Modelling, and Control System Design. Springer Verlag London Ltd, Vol. 9781430237051. p. 559-581 23 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  78. Published

    Strength/elongation optimisation in alloys: A case for accelerated metallurgy research

    Nava, E. I. G., Toda-Caraballo, I. & Rivera-Diaz, P. E. J. D. C., 1/01/2013, TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting. Wiley-Blackwell, p. 319-326 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  79. Published

    Symmetry in material property relationships: A tool for the discovery of new alloys

    Toda-Caraballo, I., Galindo, E. I. N. & Rivera-Díaz, P. E. J. D. C., 1/01/2013, TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting. Wiley-Blackwell, p. 311-318 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  80. Published

    Flow visualization in gas-solid packed beds by spatially resolved near-infrared imaging

    Aiouache, F., Nic An tSaoir, M. & Luis Abreu Fernandes, D., 1/01/2012, Single and Two-Phase Flows on Chemical and Biomedical Engineering. Dias, R., Lima, R., Martins, A. A. & Mata, T. M. (eds.). Bentham Science Publishers Ltd., p. 332-360 29 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  81. Published

    Nanoparticles, Properties, and Applications in Glass Ionomer Cements

    Khan, A. S., Khan, M. & Rehman, I. U., 2012, Nanobiomaterials in Clinical Dentistry. Elsevier Inc., p. 93-108 16 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  82. Published

    Multi-state dependent parameter model identification and estimation

    Tych, W., Sadeghi, J., Smith, P. J., Chotai, A. & Taylor, C. J., 2012, System Identification, Environmental Modelling, and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 191-210 20 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  83. Published

    Rebound of a particle from a surface with a viscous and nonlinear viscoelastic liquid in the contact zone

    Bowen, J., Cheneler, D., Andrews, J., Wu, C., Ward, M. & Adams, M., 2012, Discrete element modelling of particulate media. Wu, C. (ed.). Cambridge: RSC Publishing, p. 86-94 9 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  84. Published

    Analysis of a coupled-mass microrheometer

    Cheneler, D., 2012, Advances in microfluidics. Kelly, R. T. (ed.). Bejing, China: InTech, p. 50-70 21 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  85. Published

    The influence of wetting on the buoyancy of particles

    Bowen, J., Cheneler, D., Ward, M. & Adams, M., 2012, Particulate materials: synthesis, characterisation, processing and modelling. Wu, J. & Ge, W. (eds.). Cambridge: RSC Publishing, p. 213-218 6 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  86. Published

    Linear and nonlinear non-minimal state space control system design.

    Taylor, C. J., Chotai, A. & Tych, W., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 559-582 24 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  87. Published

    SSpace: A flexible and general state space toolbox for MATLAB.

    Taylor, C. J. & Pedregal, D. J., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 615-636 22 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  88. Published

    Thermomechanical Processing Design of Nanoprecipitate Strengthened Alloys Employing Genetic Algorithms

    Rivera-Diaz-del-Castillo, P. E. J., de Jong, M. & Sluiter, M. H. F., 20/04/2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. John Wiley and Sons Inc., Vol. 2. p. 477-484 8 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  89. Published

    Determination of the Constants of Formation of Complexes of Iron(III) and acetohydroxamic acid

    Andrieux, F., Boxall, C. & Taylor, R., 01/2011, Applications of Thermodynamics to Biological and Materials Science. Mizutani, T. (ed.). Rijeka, Croatia: InTech, p. 441-458 17 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  90. Published

    Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites

    Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  91. Published

    Dental regeneration

    Rehman, I. U. & Khan, A. S., 2011, Electrospinning for Tissue Regeneration. Elsevier Inc., p. 280-297 18 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  92. Published

    An on-line monitoring technique for electrode degradation in bio-fluidic microsystems.

    Al-Gayem, Q., Liu, H., Richardson, A. M. D., Burd, N. & Kumar, M., 10/2010, Proceedings of the 2010 IEEE International Test Conference (ITC). Austin, Texas: IEEE, p. 1-10 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  93. Published

    Laser direct metal deposition: theory and applications in manufacturing and maintenance

    Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  94. Published

    Compact modelling of through-silicon vias (TSVs) in three-dimensional (3-D) integrated circuits.

    Weerasekera, R., Grange, M., Pamunuwa, D. B., Tenhunen, H. & Zheng, L-R., 10/2009, Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. San Francisco: IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  95. Published

    Scalability of Network-on-Chip communication architecture for 3-D meshes.

    Weldezion, A. Y., Grange, M., Pamunuwa, D. B., Lu, Z., Jantsch, A., Weerasekera, R. & Tenhunen, H., 12/06/2009, Proc. ACM/IEEE International Symposium on Networks on Chip (NOCS). San Diego: IEEE, p. 114-123 10 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  96. Published

    Conceptual design of a 1MW 175MHz CW magnetron.

    Carter, R. G., 04/2009, 2009 IEEE International Vacuum Electronics Conference. Piscataway, NJ, USA: IEEE, 566 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  97. Published

    Simple model of an inductive output tube.

    Carter, R. G., 04/2009, 2009 IEEE International Vacuum Electronics Conference. Piscataway, NJ, USA: IEEE, p. 427-428 2 p.

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  98. Published

    Closed-form equations for through-silicon via (TSV) parasitics in 3-D integrated circuits (ICs).

    Weerasekera, R., Pamunuwa, D. B., Grange, M., Tenhunen, H. & Zheng, L-R., 2009, Workshop Notes, Design, Automation and Test in Europe (DATE). Nice

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  99. Published

    Exploration of Through Silicon Via Interconnect Parasitics for 3-Dimensional Integrated Circuits

    Grange, M., Weerasekera, R., Pamunuwa, D. & Tenhunen, H., 2009, Workshop Notes, Design, Automation and Test in Europe (DATE). Nice

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  100. Published

    Bandwidth optimization for through silicon via (TSV) bundles in 3D integrated circuits.

    Weldezion, A., Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 2009, Workshop Notes, Design, Automation and Test in Europe (DATE). Nice

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  101. Published

    Physical Mapping and Performance Study of a Multi-Clock 3-Dimensional Network-on-Chip Mesh.

    Grange, M., Weldezion, A. Y., Pamunuwa, D. B., Weerasekera, R., Zhonghai, L., Jantsch, A. & Shippen, D., 2009, Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. San Francisco: IEEE

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

  102. Published

    The Radioactivity Depth Analysis Tool (RADPAT).

    Shippen, B. A. & Joyce, M. J., 2009, ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM2009). American Society of Mechanical Engineers, Vol. 2. p. 149-155 7 p. (American Society of Mechanical Engineers).

    Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSNChapter

Previous 1 2 3 4 5 6 7 8 ...61 Next

Back to top