School of Engineering

View graph of relations

Faculty of Science and Technology

Show 14 centres, groups and clusters

Hide 14 centres, groups and clusters

4401 - 4500 out of 6,515Page size: 100

10
25
50
100
500

RSS feed of this list

Sort by: Title

Published
Effects of Braid Angle and Material Modulus on the Negative Poisson’s Ratio of Braided Auxetic Yarns
Shah, A. A., Shahid, M., Hardy, J. G., Siddiqui, N. A., Kennedy, A. R., Gul, I. H., Rehman, S. U. & Nawab, Y., 27/05/2022, In: Crystals. 12, 6, 16 p., e781.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effects of bonded splice joints on the flexural response of pultruded fibre reinforced polymer beams
Turvey, G., 7/09/2010. 6 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effects of biological pre-treatment of lignocellulosic waste with white-rot fungi on the stimulation of 14C-phenanthrene catabolism in soils
Omoni, V. T., Lag-Brotons, A. J., Ibeto, C. N. & Semple, K. T., 30/11/2021, In: International Biodeterioration and Biodegradation. 165, 10 p., 105324.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of zinc on the fracture behavior of galvanized steel/6061 aluminum alloy by laser brazing
Zhang, P., Shi, H., Tian, Y., Yu, Z. & Wu, D., 1/01/2021, In: Welding in the World. 65, p. 13–22 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach
Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)
Published
Effect of vortex induced vibration on a paired-column semisubmersible platform
Odijie, C. & Ye, J., 12/2015, In: International Journal of Structural Stability and Dynamics. 15, 8, 22 p., 1540019.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of volumetric energy density on microstructure and tribological properties of FeCoNiCuAl high-entropy alloy produced by laser powder bed fusion
Ren, Y., Liang, L., Shan, Q., Cai, A., Du, J., Huang, Q., Liu, S., Yang, X., Tian, Y. & Wu, H., 31/12/2020, In: Virtual and Physical Prototyping. 15, S1, p. 543-554 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of varying the amount of binder on the electrochemical characteristics of palm shell activated carbon
Maarof, H. I., Wan Daud, W. M. A. & Aroua, M. K., 6/06/2017, In: IOP Conference Series: Materials Science and Engineering. 210, 1, 10 p., 012011.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Ultrasonication Duration and Temperature on the Stability and Viscosity of MXene/Water Nanofluid
Malek, N. A., Ab Razak, N. N., Masuri, S. U., Saidur, R., Tan, K., Jaafar, C. N. A. & Supeni, E. E., 25/06/2024, In: Malaysian Journal of Chemistry. 26, 3, p. 112-126 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of tunable composition-shape of bio-inspired Pt NPs electrocatalyst in direct methanol fuel cell: Process optimization and kinetic studies
Md Ishak, N. A. I., Kamarudin, S. K., Mansor, M., Yahya, N., Bahru, R. & Rahman, S., 10/02/2024, In: Journal of Cleaner Production. 440, 140637.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Thermal and Mechanical Deformation of Metamaterial FDM Components
Celik, H. K., Tan, Y., Seviour, R. & Rennie, A., 09/2009, US _ TURKEY Workshop on Rapid Technologies (RapidTech 2009). p. 83-88 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effect of the Orientation of the Array Elements of Uniform Circular Antenna Arrays on Orbital Angular Momentum (OAM) Modes
Wulff, M., Wang, L., Yang, C. & Schuster, C., 16/05/2022, 2022 German Microwave Conference, GeMiC 2022. IEEE, p. 164-167 4 p. (2022 German Microwave Conference, GeMiC 2022).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effect of the Material Extrusion Process Parameters on the Compressive Properties of Additively Manufactured Foamed and Nonfoamed Polylactic Acid Structures
Yousefi Kanani, A. & Kennedy, A., 1/02/2024, In: 3D Printing and Additive Manufacturing. 11, 1, p. 207-218 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of the Interference from Conducting Plates on OAM Based Wireless Communication
Wang, L., Yang, C., Brüns, H.-D. & Schuster, C., 24/10/2019, 2019 International Conference on Electromagnetics in Advanced Applications (ICEAA).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effect of the Inoculum-to-Substrate Ratio on Putative Pathogens and Microbial Kinetics during the Batch Anaerobic Digestion of Simulated Food Waste
Otite, S. V., Gandhi, B. P., Agyabeng Fofie, E., Lag-Brotons, A. J., Ezemonye, L. I., Martin, A. D., Pickup, R. W. & Semple, K. T., 18/03/2024, In: Microorganisms. 12, 3, 603.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of the cap layer growth temperature on the Sb distribution in InAs/InSb/InAs sub-monolayer heterostructures for mid-infrared devices
Khan, A., Repiso Menendez, E., Herrera, M., Carrington, P., De La Mata, M., Pizarro, J., Krier, A. & Molina, S., 16/12/2019, In: Nanotechnology. 31, 10, 9 p., 105702.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of terrain roughness on the roll and yaw directional stability of an articulated frame steer vehicle
Pazooki, A., Rakheja, S. & Cao, D., 2013, In: SAE International Journal of Commercial Vehicles. 6, 2, p. 325-339 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of tape width and thickness on helix slow-wave structure performance
D'Agostino, S., Emma, F. & Paoloni, C., 5/11/1999, In: Microwave and Optical Technology Letters. 23, 3, p. 147-149 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of surfactants on thermal conductivity of graphene based hybrid nanofluid
Hong, W. X., Sidik, N. A. C. & Saidur, R., 6/04/2020, In: IOP Conference Series: Earth and Environmental Science. 463, 6 p., 012122.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of support redox character on catalytic performance in the gas phase hydrogenation of benzaldehyde and nitrobenzene over supported gold
Li, M., Wang, X., Cardenas-Lizana, F. & Keane, M. A., 1/01/2017, In: Catalysis Today. 279, p. 19-28 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of supercritical carbonation on the strength and heavy metal retention of cement-solidified fly ash
Zha, X., Ning, J., Saafi, M., Dong, L., Dassekpo, J.-B. & Ye, J., 1/06/2019, In: Cement and Concrete Research. 120, p. 36-45 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of sulfuric acid concentration on corrosion behavior of Al0.1CoCrFeNi high-entropy alloy
Sun, Y., Lan, A., Wang, Z., Zhang, M. & Qiao, J., 28/02/2022, In: Journal of physics and chemistry of solids. 161, 9 p., 110397.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of solidification rate on pore connectivity of aluminium foams and its consequences on mechanical properties
Lázaro, J., Solórzano, E., Rodríguez-Perez, M. A. & Kennedy, A. R., 30/08/2016, In: Materials Science and Engineering: A. 672, p. 236-246 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of soil deformability on off-road vehicle ride dynamics
Pakowski, A. & Cao, D., 24/09/2013, In: SAE International Journal of Commercial Vehicles. 6, 2, p. 362-371 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Shear on the Flexure of Pultruded GFRP Tubes
Holton, J. & Turvey, G., 3/09/2019, p. 55-61. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effect of shear connector spacing and layout on the shear connector capacity in composite beams
Qureshi, J., Lam, D. & Ye, J., 04/2011, In: Journal of Constructional Steel Research. 67, 4, p. 706-719 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of rubber particles and fibers on the dynamic compressive behavior of novel ultra-lightweight cement composites: Numerical simulations and metamodeling
Huang, Z., Deng, W., Du, S., Gu, Z., Long, W. & Ye, J., 15/02/2021, In: Composite Structures. 258, 20 p., 113210.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of restraint on the creep behavior of clinical bone cement
Liu, C., Green, S. M., Watkins, N. D., Gregg, P. J. & McCaskie, A. W., 15/06/2002, In: Journal of Materials Science Letters. 21, 12, p. 959-962 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Reaction Medium Mixture on the Lipase Catalyzed Synthesis of Diacylglycerol
Abd Razak, N. N., Pérès, Y., Gew, L. T., Cognet, P. & Aroua, M. K., 27/05/2020, In: Industrial and Engineering Chemistry Research. 59, 21, p. 9869-9881 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of processing parameters on the densification, microstructure and crystallographic texture during the laser powder bed fusion of pure tungsten
Sidambe, A. T., Tian, Y., Prangnell, P. B. & Fox, P., 1/01/2019, In: International Journal of Refractory Metals and Hard Materials. 78, p. 254-263 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of process conditions on temperature distribution in the powder bed during laser sintering of polyamide-12
Nelson, J. A., Rennie, A., Abram, T., Bennett, G. R., Adiele, A., Tripp, M., Wood, M. & Galloway, G., 07/2015, In: Journal of Thermal Engineering. 1, 3, p. 159-165 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of positive/negative electrode ratio on cold metal transfer welding of 6061 aluminum alloy
Zhang, P., Li, G., Yan, H. & Tian, Y., 29/02/2020, In: International Journal of Advanced Manufacturing Technology. 106, 3-4, p. 1453-1464 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Forthcoming
Effect of poly-γ-glutamic acid molecular weight on the proper-ties of whey protein isolate hydrogels.
Baines, D., Pawlak-Likus, Z., Tavernaraki, N., Platania, V., Parati, M., Wong Wong Cheung, T., Radecka, I., Domalik-Pyzik, P., Chatzinikolaidou, M. & Douglas, T., 28/05/2025, (Accepted/In press) In: Polymers.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Poly-γ-Glutamic Acid Molecular Weight on the Properties of Whey Protein Isolate Hydrogels
Baines, D. K., Pawlak-Likus, Z., Tavernaraki, N. N., Platania, V., Parati, M., Cheung, T. N. W. W., Radecka, I., Domalik-Pyzik, P., Chatzinikolaidou, M. & Douglas, T. E. L., 9/06/2025, In: Polymers. 17, 12, 1605.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of phase transformation on mechanical properties of Al16.80Co20.74Cr20.49Fe21.28Ni20.70 high entropy alloy coatings processed by laser cladding
Wei, X., Zhang, P., Yu, Z., Yan, H., Wu, D., Shi, H., Chen, J., Lu, Q., Tian, Y., Ma, S. & Lei, W., 5/05/2021, In: Journal of Alloys and Compounds. 862, 16 p., 158563.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of pH, polymer concentration and molecular weight on the physical state properties of tolfenamic acid
Sheraz, M. A., Ahmed, S. & Rehman, I. U., 2015, In: Pharmaceutical Development and Technology. 20, 3, p. 352-360 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of particle size on the viscosity of nanofluids: a review
Dogacan Koca, H., Doganay, S., Turgut, A., Tavman, I. H., Rahman, S. & Mahbubul, I. M., 02/2018, In: Renewable and Sustainable Energy Reviews. 82, 1, p. 1664-1674 31 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of particle loading on the stability of the water based iron-oxide nanofluids
Arifutzzaman, A., Ismail, A. F., Khan, A. A., Alam, M. Z. & Saidur, R., 24/01/2020, In: International Journal of Advanced Science and Technology. 29, 1, p. 1326-1333 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of N+ ion implantation on the shape-memory behaviour and corrosion resistance of an equiatomic Ni Ti alloy
Green, S. M., Grant, D. M., Wood, J. V., Johanson, A., Johnson, E. & Sarholt-Kristensen, L., 1993, In: Journal of Materials Science Letters. 12, 9, p. 618-619 2 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of microstructural roughness on the performance and fracture mechanism of multi-type single lap joints
Pang, K., Wang, X.-E., Ye, J., Carnegie, C. & Hou, X., 30/11/2024, In: Composites Part B: Engineering. 286, 111763.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of melting modes on microstructure and tribological properties of selective laser melted AlSi10Mg alloy
Wu, H., Ren, Y., Ren, J., Cai, A., Song, M., Liu, Y., Wu, X., Li, Q., Huang, W., Wang, X. & Baker, I., 8/12/2020, In: Virtual and Physical Prototyping. 15, sup1, p. 570-582 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of mechanical tolerance of T-shaped rods in a TWT based on a helix slow-wave structure
D'Agostino, S. & Paoloni, C., 20/06/2000, In: Microwave and Optical Technology Letters. 25, 6, p. 393-395 3 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Magnesium Addition on the Cell Structure of Foams Produced From Re-melted Aluminum Alloy Scrap
Vinod-Kumar, G. S., Heim, K., Jerry, J., Garcia-Moreno, F., Kennedy, A. R. & Banhart, J., 1/10/2017, In: Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 48, 5, p. 2551-2563 13 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of load position on the lateral buckling of pultruded GRP cantilevers - correlations between experiment and theory.
Turvey, G. J., 05/1996, In: Composite Structures. 35, 1, p. 33-47 15 p.
Research output: Contribution to Journal/Magazine › Journal article
Published
Effect of Li-LSX zeolite, NiCe/Al2O3 and NiCe/ZrO2 on the production of drop-in bio-fuels by pyrolysis and hydrotreating of Nannochloropsis and isochrysis microalgae
Bagnato, G., Boulet, F. & Sanna, A., 15/07/2019, In: Energy. 179, p. 199-213 15 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of lead sintering aid to TiO 2 photoanode for flexible dye sensitized solar cell
Khir, H., Pandey, A. K., Saidur, R., Ahmad, M. S., Dewika, M. & Samykano, M., 1/12/2023, In: IOP Conference Series: Earth and Environmental Science. 1261, 1, 012016.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of laser scannings speed on microstructure, tribological and corrosion behavior of Ti-23Nb alloys produced by laser metal deposition
Ren, Y., Wu, H., Du, J., Liu, B., Wang, X., Jiao, Z., Tian, Y. & Baker, I., 31/03/2023, In: Materials Characterization. 197, 8 p., 112647.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of hole clearance on bolt loads in pultruded GRP tension joints
Turvey, G. & Wang, P., 8/07/2007. 7 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effect of holding time on microstructure and mechanical properties of SiC/SiC joints brazed by Ag-Cu-Ti + B4C composite filler
Dai, X., Cao, J., Tian, Y., Chen, Z., Song, X. & Feng, J., 08/2016, In: Materials Characterization. 118, p. 294-301 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of heat treatment on pulsed laser deposited amorphous calcium phosphate coatings
García, F., Arias, J. L., Mayor, B., Pou, J., Rehman, I., Knowles, J., Best, S., León, B., Pérez-Amor, M. & Bonfield, W., 1998, In: Journal of Biomedical Materials Research Part A. 43, 1, p. 69-76 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of grain size on mechanical characteristics and work-hardening behavior of fine-grained Mg-0.8Mn alloy via adjusting extrusion temperature
Li, C. C., Qiao, X. G., Sun, W. T., Golovin, I. S., Kim, H. S., Sakai, T. & Zheng, M. Y., 5/01/2025, In: Journal of Alloys and Compounds. 1010, 177322.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of focused ion beam milling on microcantilever loss
Anthony, C. J., Torricelli, G., Prewett, P. D., Cheneler, D., Binns, C. & Sabouri, A., 04/2011, In: Journal of Micromechanics and Microengineering. 21, 4, 045031.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of fabrication tolerance on 0.346 THz double corrugated waveguide for backward wave oscillators
Li, X., Gamzina, D., Letizia, R., Gonzales, M., Tang, Y., Zheng, Y., Popovic, B., Himes, L., Barchfeld, R., Li, H., Pan, P., Feng, J., Paoloni, C. & Luhmann Jr., N. C., 24/04/2018, p. 335-336. 2 p.
Research output: Contribution to conference - Without ISBN/ISSN › Conference paper › peer-review
Published
Effect of exfoliated graphene on thermal conductivity enhancements of graphene-ironoxide hybrid nanofluids: Experimental investigation and effective medium theories
Arifutzzaman, A., Ismail, A. F. B., Alam, M. Z., Khan, A. A. & Saidur, R., 30/04/2021, In: Journal of Nano Research. 67, p. 97-114 18 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of electrochemical regeneration on the surface of a graphite adsorbent loaded with an organic contaminant
Mohammad, H., Martin, A. D., Hill, P. I., Hodson, N., Brown, N. & Roberts, E. P. L., 1/06/2020, In: International Journal of Environmental Science and Technology. 17, 6, p. 3131-3142 12 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of doubly fed induction generatortidal current turbines on stability of a distribution grid under unbalanced voltage conditions
Zhang, D., Ma, X., Si , Y., Huang , C., Huang, B. & Li , W., 13/02/2017, In: Energies. 10, 2, 14 p., 212.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of different beverages on the color stability and degree of conversion of nano and microhybrid composites
Al Kheraif, A. A. A., Qasim, S. S. B., Ramakrishnaiah, R. & Rehman, I., 2013, In: Dental Materials Journal. 32, 2, p. 326-331 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of deposition rate on microstructure and mechanical properties of wire arc additive manufacturing of Ti-6Al-4V components
Zhang, P.-L., Jia, Z.-Y., Yan, H., Yu, Z.-S., Wu, D., Shi, H.-C., Wang, F.-X., Tian, Y.-T., Ma, S.-Y. & Lei, W.-S., 30/04/2021, In: Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology). 28, 4, p. 1100-1110 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of dc voltage pulsing on high-vacuum electrical breakdowns near Cu surfaces
Saressalo, A., Profatilova, I., Millar, W. L., Kyritsakis, A., Calatroni, S., Wuensch, W. & Djurabekova, F., 9/11/2020, In: Physical Review Accelerators and Beams. 23, 11, 14 p., 113101.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of crystal thickness in localized terahertz generation via optical rectification in ZnTe: preliminary investigation
Lin, H., Ung, B. S. Y., Fischer, B. M., Mickan, S. P. & Abbott, D., 2009, Infrared, Millimeter, and Terahertz Waves, 2009. IRMMW-THz 2009. 34th International Conference on. IEEE, 2 p. 5325560
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effect of Coronal Fracture Angle on the Stability of Screw Fixation in Medial Malleolar Fractures: A Finite Element Analysis
Emre, T. Y., Celik, H. K., Arik, H. O., Rennie, A. & Kose, O., 1/06/2022, In: Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine. 236, 6, p. 825-840 16 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of Ceria Addition to Na<sub>2</sub>O-ZrO<sub>2</sub> Catalytic Mixtures on Lignin Waste Ex-Situ Pyrolysis
Yeardley, A., Bagnato, G. & Sanna, A., 5/02/2021, In: Molecules. 26, 4, 14 p., 827.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of cartilage thickness mismatch in osteochondral grafting from knee to talus on articular contact pressures: A finite element analysis
Kılıçaslan, Ö. F., Levent, A., Celik, H. K., Tokgöz, M. A., Köse, Ö. & Rennie, A., 11/06/2021, In: Joint Diseases and Related Surgery. 32, 2, p. 355-362 8 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of calcium hydroxide on mechanical strength and biological properties of bioactive glass
Shah, A. T., Batool, M., Chaudhry, A. A., Iqbal, F., Javaid, A., Zahid, S., Ilyas, K., bin Qasim, S., Khan, A. F., Khan, A. S. & ur Rehman, I., 1/08/2016, In: Journal of the Mechanical Behavior of Biomedical Materials. 61, p. 617-626 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of build orientation on FDM parts: a case study for validation of deformation behaviour by FEA
Hambali, R. H., Celik, K., Smith, P., Rennie, A. & Ucar, M., 09/2010, International Conference on Design and Concurrent Engineering (iDECON 2010): Manufacturing Challenges Towards Global Sustainability. Penerbit Universiti (UTeM), p. 224-228 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Effect of boundaries on the space-charge potential in coupled cavity traveling-wave tubes.
Srivastava, V. & Carter, R. G., 10/1986, In: IEE Proceedings I (Communications, Speech and Vision). 133, 5, p. 185-188 4 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of biomass pre-treatment and solvent extraction on β-carotene and lycopene recovery from Blakeslea trispora cells
Papaioannou, E., Roukas, T. & Liakopoulou-Kyriakides, M., 07/2008, In: Preparative Biochemistry and Biotechnology. 38, 3, p. 246-256 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
E-pub ahead of print
Effect of binder ratio on the physical properties of porous carbon pellet for CO2 capture
Hussin, F., Hazani, N. N. & Aroua, M. K., 19/01/2023, (E-pub ahead of print) In: Materials Today: Proceedings.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of beverages on viscoelastic properties of resin-based dental composites
Kaleem, M., Khan, A. S., Rehman, I. U. & Wong, F. S., 2015, In: Materials. 8, 6, p. 2863-2872 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of beam parameters on the non-linear performance in broadband helix TWTs.
Jenkins, R. O. & Carter, R. G., 04/2002, Third IEEE International Vacuum Electronics Conference, 2002. IVEC 2002.. p. 286-287 2 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Effect of beam defocusing on porosity formation in laser-MIG hybrid welded TA2 titanium alloy joints
Chen, S., Luo, S., Yu, H., Geng, H., Xu, G., Li, R. & Tian, Y., 1/10/2020, In: Journal of Manufacturing Processes. 58, p. 1221-1231 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of beam angle on HAZ, recast and oxide layer characteristics in laser drilling of TBC nickel superalloys
Sezer, H. K., Li, L., Schmidt, M., Pinkerton, A. J., Anderson, B. & Williams, P., 12/2006, In: International Journal of Machine Tools and Manufacture. 46, 15, p. 1972-1982 11 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of alkaline fuel cell catalyst on deuterium isotope separation
Tanii, R., Ogawa, R., Matsushima, H., Ueda, M. & Dawson, R., 3/02/2021, In: International Journal of Hydrogen Energy. 46, 9, p. 6745-6750 6 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect of al2o3 dispersion on enthalpy and thermal stability of ternary nitrate eutectic salt
Krishna, Y., Saidur, R., Faizal, M., Aslfattahi, N., Ng, K. C., Arifutzzaman, A. & Karinka, S., 1/05/2020, In: International Journal of Nanoelectronics and Materials. 13, Special Issue ISSTE2019, p. 75-84 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Effect and tolerances of phase and amplitude errors in the ILC crab cavity.
Burt, G., Goudket, P., Dexter, A. & Kalinin, A., 2006.
Research output: Working paper
Published
Editors' perspectives: road vehicle suspension design, dynamics, and control
Cao, D., Song, X. & Ahmadian, M., 2011, In: Vehicle System Dynamics. 49, 1-2, p. 3-28 26 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Editorial: Resource Recovery From Waste
Lag-Brotons, A. J., Velenturf, A. P. M., Crane, R., Head, I. M., Purnell, P. & Semple, K. T., 3/04/2020, In: Frontiers in Environmental Science. 8, 3 p., 35.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Editorial: Rapid Design, Prototyping and Manufacturing
Bibb, R. (Guest editor) & Rennie, A. E. W. (Guest editor), 01/2017, In: International Journal of Rapid Manufacturing. 6, 2-3, p. 95-96 2 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Editorial: Mixed signal & analogue IC test technology
Richardson, A. & Dorey, T., 12/1996, In: IEE Proceedings - Circuits, Devices and Systems. 143, 6, p. 357-357 1 p.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Editorial: Advanced motion control and navigation of robots in extreme environments
Montazeri, A., Sadeghzadeh-Nokhodberiz, N., Shojaei, K. & Althoefer, K., 15/11/2024, In: Frontiers in Robotics and AI. 11, 1510013.
Research output: Contribution to Journal/Magazine › Editorial › peer-review
Published
Edge Solution for Real-time Motor Fault Diagnosis Based on Efficient Convolutional Neural Network
An, K., Lu, J., Zhu, Q., Wang, X., De Silva, C. W., Xia, M. & Lu, S., 31/05/2023, In: IEEE Transactions on Instrumentation and Measurement. 72, p. 1-12 12 p., 3516912.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Edge effects in cross-ply laminated hollow cylindrical shells
Ye, J. Q., 2000, Computational techniques for materials, composites and composite structures. Topping, B. (ed.). Edinburgh: Civil-Comp Press, p. 359-363 5 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Edge effects in angle-ply laminated hollow cylinders
Ye, J. Q., 05/2001, In: Composite Structures. 52, 2, p. 247-253 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Edge dislocation dipole emission from a blunt crack tip and its morphological effects
Huang, M., Díaz Del Castillo, P. E. J. R. & Li, Z., 1/02/2006, In: Scripta Materialia. 54, 4 , p. 649-653 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Eddy current measurements of electrical conductivity and magnetic permeability of porous metals.
Ma, X., Peyton, A. J. & Zhao, Y. Y., 10/2006, In: NDT and E International. 39, 7, p. 562 -568
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Eddy current measurement of the electrical conductivity and porosity of metal foams.
Ma, X. & Peyton, A. J., 03/2006, In: IEEE Transactions on Instrumentation and Measurement. 55, 2, p. 570-576 7 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Eddy current measurement of the electrical conductivity and porosity of metal foams.
Ma, X. & Peyton, A. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 127-132 6 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
ECR deposition of hydrogenated diamond-like amorphous carbon films using acetylene-oxygen plasmas
Adamopoulos, G., Godet, C., Drévillon, B., Saito, Y., Batchelder, D. N., Grosman, A. & Ortega, C., 2003, In: Diamond and Related Materials. 12, 3-7, p. 983-987 5 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Economical conversion of low-head hydropower
Widden, M. B. & French, M. J., 2000, Proceedings of the world renewable energy congress VI. Brighton, p. 1611-1614 4 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Economic viability and production capacity of wind generated renewable hydrogen
Mohsin, M., Rasheed, A. K. & Rahman, S., 1/02/2018, In: International Journal of Hydrogen Energy. 43, 5, p. 2621-2630 10 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Economic Methods for the Selection of Renewable Energy Sources: A Case Study
DiLellio, J., Aggidis, G., Vandercruyssen, D. & Howard, D., 26/05/2025, In: Sustainability. 17, 11, 4857.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Economic low head hydro power by conversion to air pressure.
Widden, M. B., French, M. J. & Aggidis, G. A., 05/2005, Proceedings of the world renewable energy congress.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Economic energy from low head water by conversion to air pressure.
Widden, M. B., French, M. J. & Aggidis, G. A., 12/2004, In: IMechE Conference Transactions. v. 6, p. 41-49 9 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
Economic Aspects of Fiber Reinforced Polymer Composite Recycling
Amaechi, C. V., Odijie, A. C., Orok, E. O. & Ye, J., 20/01/2020, Encyclopedia of Renewable and Sustainable Materials. Choudhury, I. & Hashmi, S. (eds.). Elsevier, Vol. 1. p. 377-397 21 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Entry for encyclopedia/dictionary
Published
Economic analysis of a freeze-drying cycle
Stratta, L., Capozzi, L. C., Franzino, S. & Pisano, R., 2/11/2020, In: Processes. 8, 11, p. 1-17 17 p., 1399.
Research output: Contribution to Journal/Magazine › Journal article › peer-review
Published
E-band traveling wave tube for high data rate wireless links
Basu, R., Gates, J., Narasimhan, P., Letizia, R. & Paoloni, C., 26/09/2022, 47th International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz 2022) . IEEE, (International Conference on Infrared, Millimeter and Terahertz Waves (IRMMW-THz); vol. 47).
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Conference contribution/Paper › peer-review
Published
Early selection of system implementation choice among SoC, SoP and 3-D integration.
Weerasekera, R., Zheng, L.-R., Pamunuwa, D. B. & Tenhunen, H., 09/2007, Proc. International System-On-Chip Conference (SOCC). Hsin Chu, Taiwan: IEEE
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Early cellular events in the response of guard cells to ABA.
McAinsh, M. R., Brownlee, C. & Hetherington, A. M., 1990, Importance of Root to Shoot Communication in the Response to Environmental Stress. Monographs 21. Davies, W. J. & Jeffcoat, B. (eds.). Bristol: BSPGR, p. 1-11 11 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Dysarthic speech measures for use in evidence-based speech therapy.
Simm, W., Roberts, P. E. & Joyce, M. J., 2006, Proceedings of the 3rd Cambridge workshop on universal access and assistive technology.. Clarkson, J., Langdon, P. & Robinson, P. (eds.). London: Springer, p. 155-164 10 p.
Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter
Published
Dynamics-Based Modified Fast Simultaneous Localisation and Mapping for Unmanned Aerial Vehicles with Joint Inertial Sensor Bias and Drift Estimation
Sadeghzadeh Nokhodberiz, N., Can, A., Stolkin, R. & Montazeri, A., 24/08/2021, In: IEEE Access. 9, p. 120247-120260 14 p.
Research output: Contribution to Journal/Magazine › Journal article › peer-review

Previous 1...41 42 43 44 45 46 47 48 ...66 Next

Research

School of Engineering

Quick Links

Connect With Us