RF Systems

Calaga, R., Baudrenghien, P., Burt, G., Capatina, O., Jensen, E., Montesinos, E. & Ratti, A., 29/02/2024, The High Luminosity Large Hadron Collider: New Machine for Illuminating the Mysteries of the Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, p. 199-224 26 p. (Advanced Series on Directions in High Energy Physics).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Additive Manufacturing as an Enabler of Environmental Solutions to Address Food Security

Roberts, J., Donkersley, P., Ashmore, L. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 287-297 11 p. (Springer Tracts in Additive Manufacturing).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Viscous Layer Formation in Electrochemical Polishing Laser-Powder Bed Fusion Parts with Different Surface Profiles

Zhu, H., Tian, Y. & Rennie, A., 30/07/2023, Springer Tracts in Additive Manufacturing: Proceedings of CASICAM 2022. Zarbane, K. & Beidouri, Z. (eds.). Cham: Springer Nature, p. 219-228 10 p. (Springer Tracts in Additive Manufacturing).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Robotics and Artificial Intelligence in the Nuclear Industry: From Teleoperation to Cyber Physical Systems

Shanahan, D., Wang, Z. & Montazeri, A., 31/03/2023, Artificial intelligence for Robotics and Autonomous Systems. Cham: Springer Nature, 43 p. (Studies in Computational Intelligence).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Real-Time Defect Detection of Die Cast Rotor in EV Induction Motor Based on Circular Flux Sensing Coils

Zhu, Q., Wang, X., Wang, H., Xia, M., Cao, W. & Lu, S., 30/11/2022, Advanced Sensors and Sensing Technologies for Electric Vehicles. Cao, W. & Lu, S. (eds.). AIP Publishing, p. 1-26 26 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Virtual workshops using Microsoft Teams

Roberts, J. & Munday, D., 20/07/2022, 100 Ideas for Active Learning. Oprandi, P. & Betts, T. (eds.). University of Sussex Library, p. 865-872 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Microsoft SharePoint integration within Teams for delivery of lecture content

Munday, D. & Roberts, J., 20/07/2022, 100 Ideas for Active Learning. Oprandi, P. & Betts, T. (eds.). Brighton: University of Sussex Library, p. 857-864 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Event-based Robust Control Techniques for Wheel-Based Robots Under Cyber-attack and Dynamic Quantizer

Saeedi, M., Zarei, J., Seif, M. & Montazeri, A., 2022, (Accepted/In press) Mobile Robots: Motion Control and Path Planning. Cham: Springer Nature, 35 p. (Studies in Computational Intelligence).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Vacuum Electronic Devices

Paoloni, C., 8/12/2021, THz Communications: Paving the Way Towards Wireless Tbps. Kürner, T., Mittleman, D. M. & Nagatsuma, T. (eds.). Cham: Springer, p. 317-327 11 p. (Springer Series in Optical Sciences; vol. 234).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

ULTRAWAVE

Paoloni, C., 8/12/2021, THz Communications: Paving the Way Towards Wireless Tbps. Kürner, T., Mittleman, D. M. & Nagatsuma, T. (eds.). Cham: Springer, p. 423-425 3 p. (Springer Series in Optical Sciences; vol. 234).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Terahertz Front End Technology and Deployment for Ultra-High Capacity Links

Magne, F., Le, T., Llorente, R., Paoloni, C. & Ramirez, A., 11/08/2021, Next Generation Wireless Terahertz Communication Networks. Ghafoor, S., Husain Rehmani, M. & Davy, A. (eds.). London: CRC Press

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Unmanned Aerial Systems: Autonomy, Cognition and Control

Montazeri, A., Can, A. & Imran, I., 21/01/2021, Unmanned Aerial Systems: Theoretical Foundation and Applications. Koubaa, A. & Taher Azar, A. (eds.). Elsevier, p. 47-80 34 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Community-University Research: A Warts and All Account

Whittle, J., Ferrario, M. A. & Simm, W., 1/01/2020, Into the Wild: Beyond the Design Research Lab. Chamberlain, A. & Crabtree, A. (eds.). Springer International Publishing, p. 115-147 33 p. (Studies in Applied Philosophy, Epistemology and Rational Ethics ; vol. 48).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Case study on Resource Recovery: linking renewable energy, waste management and sustainable agriculture

Semple, K., Marshall, R., Lag Brotons, A., Herbert, B. & Hurst, L., 12/2018, From waste to resource productivity: Evidence and case studies. p. 39-50 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Hydrogen Production for PEM Fuel Cells

Basile, A., Iulianelli, A., Bagnato, G. & Dalena, F., 11/11/2015, Production of Hydrogen from Renewable Resources. Springer, p. 315-338 24 p. (Biofuels and Biorefineries).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

Monitoring degradation in the field

Swingler, J., Jones, J., Bryant, M. D., Feinberg, A., Ma, X. & Weaver, P. M., 30/12/2014, The physics of degradation in engineered materials and devices: fundamentals and principles. Swingler, J. (ed.). Momentum Press , p. 117-151 34 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

The role of technical functional analysis in innovative design of bespoke rapid manufactured parts: medical industry applications

Lupeanu, M., Rosu, M-M., Rennie, A., Neagu, C. & Brooks, H., 06/2013, Advances in Production, Automation and Transportation Systems: Proceedings of the 6th WSEAS International Conference on Manufacturing Engineering, Quality and Production Systems (MEQAPS13) and 4th International Conference on Automotive and Transportation Systems (ICAT13). Brasov, Romania: WSEAS Press, Vol. 13. p. 227-232 6 p. (Mathematics and Computers in Science and Engineering Series; vol. 13).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Testing of pultruded GFRP materials and structures for civil engineering

Turvey, G., 2013, Advanced Composites in Civil Engineering. 1st ed. Woodhead Publishing Limited, p. 440-508 69 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed) › peer-review

An investigation into the environmental impact of product recovery methods to support sustainable manufacturing within small and medium-sized enterprises (SMEs)

Appleby, M., Lambert, C., Rennie, A. & Buckley, A., 07/2012, Dynamic methods and process advancements in mechanical, manufacturing, and materials engineering. Davim, J. P. (ed.). Hershey, Penn.: IGI Global, p. 73-90 18 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Semiconductor photocatalysis and metal deposition

Bromley, M. & Boxall, C., 03/2012, Advances in Chemistry Research. Taylor, J. C. (ed.). Nova Science Publishers, Vol. 13.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Opportunities offered by additive manufacturing in creative businesses: informing designers

Anthony, R., Evans, M., Rennie, A. & Kirby, E., 09/2011, 13th International Conference on Engineering & Product Design Education (EPDE 11). p. 623-628 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Use of FDM in an undergraduate student project: design, build and test a model wind turbine

Widden, M., Gunn, K. & Rennie, A., 09/2010, 3rd International Conference on Additive Technologies (iCAT 2010); DAAAM Specialized Conference. DAAAM International, 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In-Line Drip Emitter

Celik, K., Karayel, D., Caglayan, N., Rennie, A. & Akinci, I., 06/2010, 11th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Jacobson, D., Rennie, A. & Bocking, C. (eds.). High Wycombe: CRDM Ltd, p. 181-191 11 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Templates for consumer use in designing customised products

Ariadi, Y. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 450-458 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Development of an Additive Layer Manufacturing (ALM) selection tool for direct manufacture of products

Smith, P. & Rennie, A., 08/2008, Solid Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 507-518 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

The application of rapid manufacturing technologies in the spare parts industry

Hasan, S. & Rennie, A., 08/2008, Sild Freeform Fabrication Symposium 2008. University of Texas at Austin, p. 584-590 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Development of an Additive Layer Manufacturing Selection Tool for Rapid Manufacturing Applications

Smith, P. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 69-79 11 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Virtual Trading System for Rapid Manufactured Products

Hasan, S. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 127-135 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Design templates for consumer use in customising additive layer manufactured products

Ariadi, Y. & Rennie, A., 06/2008, 9th National Conference on Rapid Design, Prototyping and Manufacturing: Proceedings of. Rennie, A., Jacobson, D. & Bocking, C. (eds.). Beaconsfield: MJA Print, p. 137-144 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Test of A/D Converters

Richardson, A. & Lechner, A., 2008, Test & Diagnostics of Analogue, Mixed Signal & RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 213-234 22 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Phase Locked Loop Test Methodology

Richardson, A. & Burbidge, M., 2008, Test and Diagnosis of Analogue, Mixed-signal and RF Integrated Circuits. Sun, Y. (ed.). Stevenage: IET Press, p. 277-306 30 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Effect of wind loading on low rise buildings using finite element modelling and computational fluid dynamics: A commercially focused appoach

Taylor, S., Rennie, A. & McDonald, W., 2007, Virtual and Rapid Manufacturing: Advanced Research in Virtual and Rapid Prototyping. Bartolo, P. J. D. S. (ed.). London: Taylor & Francis Group, p. 811-816 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

From Concept to Manufacture: Effective use of CAD and FEA Without Compromising Design Intent

Taylor, S. M., Rennie, A. E. W., Quayle, S. & Rawcliffe, N., 10/06/2005, Rapid Design, Prototyping and Manufacture: Proc. Sixth National Conference on . Rennnie, A., Jacobson, D. & Bocking, C. (eds.). X-CD Technologies Inc, p. 101-107 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

The applications of photocatalytic waste minimisation in nuclear fuel processing

Boxall, C., Le Gurun, G., Taylor, R. J. & Xiao, S., 2005, Handbook of Environmental Chemistry. Huntzinger, O. (ed.). Berlin: SPRINGER-VERLAG BERLIN, Vol. 2. p. 451-481 31 p. (Handbook of Environmental Chemistry ; vol. 2).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

An Investigation into the Use of Spray Formed Al/Si Metal Matrix Composites for Use as Injection Mould Die Inserts

Bocking, C., Jacobson, D. M. & Rennie, A., 09/2001, Time Compression technologies Conference 2001: Proceedings of. Rapid News Publications PLC, 22 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Rapid Production of Microwave Packaging in Silicon-Aluminium by Thin-Shell Electroforming

Bocking, C., Jacobson, D. M. & Rennie, A., 06/2001, 13th European Microelectronics and Packaging Conference & Exhibition, Proceedings of: iMAPS Strasbourg 2001, "The Millenium Conference". p. 412-415 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Relationship Between Wall Thickness and Erosion Depth of Thin Walled Electroformed EDM Electrodes Produced from RP Models

Bocking, C. E., Rennie, A. & Bennett, G. R., 08/2000, 11th International Solid Freeform Fabrication Symposium (SFF 2000). University of Texas at Austin, p. 469-477 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Surface Flatness Measurement in Stereolithography

Male, J. C., Rennie, A. & Bennett, G. R., 06/2000, The Eighth International Conference on Rapid Prototyping: Proc. of. The University of Dayton, p. 111-117 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

A system for the generation of liquid metal droplets using electromotive forces

Rennie, A. & Bennett, G. R., 09/1997, Proceedings World Congress: Manufacturing Technology Towards 2000: Incorporating the 7th International Conference on Manufacturing Engineering and the 3rd Australasian Conference on Rapid Product Development. James Cook University of North Queensland, p. 501-510 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

The wear of High Speed Selective Jet Electrodeposition electrodes when used as EDM tools

Dover, S. J., Rennie, A. & Bennett, G. R., 11/1996, Proceedings of the Second National Conference on developments in rapid prototyping and tooling. Mechanical Engineering Publications Ltd, p. 187-199 13 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Rapid prototyping using electrodeposition of copper

Dover, S. J., Rennie, A. & Bennett, G. R., 08/1996, Solid Freeform Fabrication Symposium 1996. University of Texas at Austin, p. 191-198 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Analytical solutions of composite plate and shell structures and their engineering applications

Ye, J., 1996, Advances in Applied Mechanics Research in the UK. Beijing: Science Press

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Three-dimensional buckling analysis of orthotropic cylinders subjected to thermo-mechanical loadings.

Soldatos, K. P. & Ye, J., 1995, Homogeneity and Nonlinearity in Solid Mechanics . Parker, D. F. & England, A. H. (eds.). Kluwer Academic Publishers, (Solid Mechanics and Its Applications; vol. 39).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

The Photoelectrophoresis of Colloidal Iron Oxides I: Hematite (alpha-Fe2O3)

Boxall, C., Zhang, Z. & KELSALL, G. H., 1993, Colloids in the Aquatic Environment. Thadros, T. & Gregory, J. (eds.). Amsterdam: Elsevier Science Ltd., p. 145-163 19 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter (peer-reviewed)

Destilación (II): Destilación flash

Moure Abelenda, A. & Feijoo Costa, G. (ed.), 1/05/2023, Destilación (II): Destilación flash. Feijoo, G. & Moure Abelenda, A. (eds.). Madrid: Notas de Enxeñaría Química, Vol. 11. p. 26 - 34

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Raman spectroscopy and machine learning for diagnosis and monitoring of cancer

Greenop, M., Meza Ramirez, C. A. & Rehman, I. U., 28/02/2023, Optical Spectroscopy and Imaging for Cancer Diagnostics: Fundamentals, Progress, and Challenges. Melikechi, N. (ed.). World Scientific Publishing, p. 256-298 43 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Materials and Processing

Kennedy, A. & Shipway, P., 27/12/2022, Introduction to Mechanical Engineering: Part 1. Clifford, M. (ed.). London: Routledge, p. 89-184 96 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

4.11 - Biological and Microbial Fuel Cells

Da Li, L., Şahin, S., Izadi, P., Ghangrekar, M., Duteanu, N. M., Erable, B., Scott, K. & Yu, E. H., 2/03/2022, Comprehensive Renewable Energy, Second Edition: Volume 1-9. Elsevier, Vol. 1-4. p. 290-316 27 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Powder Characterization – Methods, Standards and State of the Art

Groarke, R., Vijayaraghavan, R. K., Powell, D., Rennie, A. & Brabazon, D., 1/06/2021, Fundamentals of Laser Powder Bed Fusion of Metals. Yadroitsev, I., Yadroitsava, I., Du Plessis, A. & MacDonald, E. (eds.). Elsevier, p. 491-527 37 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Substrate Edge Antennas

Wang, L. & Yin, X., 23/04/2021, Substrate‐Integrated Millimeter‐Wave Antennas for Next‐Generation Communication and Radar Systems. Wiley

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Acoustic Monitoring of Joint Health

Spain, L. & Cheneler, D., 17/03/2021, Data Acquisition: Recent Advances and Applications in Biomedical Engineering. Płaczek, B. (ed.). InTech

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Control Structures of Grid-Tied Photovoltaic Systems

Niroomand, M. & Nasr Esfahani, F., 10/02/2021, Energy Conversion Systems: An Overview. Tripathi, S. M. & Padmanaban, S. (eds.). New York: Nova Science Publishers, p. 59-133 75 p. (Energy Science, Engineering and Technology ).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Converter Technologies for PV Systems: A Comprehensive Review

Niroomand, M. & Nasr Esfahani, F., 10/02/2021, Energy Conversion Systems: An Overview. Tripathi, S. M. & Padmanaban, S. (eds.). New York: Nova Science Publishers, p. 1-58 58 p. (Energy Science, Engineering and Technology ).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Nanocellulose-based sustainable microwave absorbers to stifle electromagnetic pollution

Pai, A., Paoloni, C. & Thomas, S., 9/10/2020, Nanocellulose Based Composites for Electronics. Elsevier, p. 237-258 22 p. (Micro and Nano Technologies).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Adding Value to Digestate and Ash (the AVAnD project): elucidating the role and the value of alternative fertilisers on the soil-plant system

Lag Brotons, A., Marshall, R., Herbert, B., Hurst, L., Inam, E. J. & Semple, K., 2020, Resource Recovery from Wastes: Towards a Circular Economy. Macaskie, L. E., Sapsford, D. J. & Mayes, W. M. (eds.). London: Royal Society of Chemistry, 28 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

From bioenergy by-products to alternative fertilisers: pursuing circular economy

Marshall, R., Lag Brotons, A., Inam, E. J., Herbert, B., Hurst, L. & Semple, K., 30/10/2019, Resource Recovery from Wastes: Towards a Circular Economy. Macaskie, L. E., Sapsford, D. J. & Mayes, W. M. (eds.). London: Royal Society of Chemistry, p. 287-314 28 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Drawbacks of Batch Processing, Current Status, and Perspectives

Pisano, R., Capozzi, L. C. & Corver, J. AWM., 24/10/2019, Continuous Manufacturing in Lyophilization of Pharmaceuticals. CRC Press ed. Routledge, 20 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Mid-infrared Light Emitting Diodes

Krier, A., Repiso Menendez, E., Al-Saymari, F., Carrington, P., Marshall, A., Lu, Q., Krier, S., Lulla Ramrakhiyani, K., Steer, M., MacGregor, C., Broderick, C., Arkani, R., O'Reilly, E., Sorel, M., Molina, S. & de la Mata, M., 18/10/2019, Mid-infrared Optoelectronics Materials, Devices, and Applications. Tournié, E. & Cerutti, L. (eds.). Elsevier

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Incorporation of nanoparticles in glass ionomer cements: Clinical applications, properties, and future perspectives

Khan, A. S., Khan, R. S., Khan, M. & Rehman, I. U., 13/04/2019, Nanobiomaterials in Clinical Dentistry. 2nd ed ed. Elsevier, p. 113-138 26 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Harmonic balance Navier-Stokes analysis of tidal stream turbine wave loads

Cavazzini, A., Campobasso, M. S., Marconcini, M., Pacciani, R. & Arnone, A., 1/03/2019, Recent Advances in CFD for Wind and​ Tidal Offshore Turbines: Springer Tracts in Mechanical Engineering. Ferrer, E. & de Montflaur, A. (eds.). 2nd ed. ed. Cham: Springer International Publishing, p. 37-49 13 p. (Springer Tracts in Mechanical Engineering).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Membrane considerations and plant design for pre-combustion CO2 capture

Bagnato, G. & Sanna, A., 12/10/2018, Current Trends and Future Developments on (Bio-) Membranes. Basile, A. & Favvas, E. P. (eds.). Elsevier, p. 415-435 21 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Energy auditing

Allouhi, A., Boharb, A., Rahman, S., Kousksou, T. & Jamil, A. M., 28/03/2018, Comprehensive Energy Systems. Dincer, I. (ed.). London: Elsevier

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Introduction: Environment, planning and land use

Kivell, P., Roberts, P. & Walker, G., 1/01/2018, Environment, Planning and Land Use. Taylor and Francis, p. 1-7 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors, Volume 50: Imaging Gas Flow in Gas–Solid Catalytic Systems by Near-Infrared Tomography

Aiouache, F., 17/11/2017, Spatially Resolved Operando Measurements in Heterogeneous Catalytic Reactors. Dixon, A. & Deutschmann, O. (eds.). Academic Press, p. 203-280 78 p. (Advances in Chemical Engineering; vol. 50).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Imaging Gas Flow in Gas–Solid Catalytic Systems by Near-Infrared Tomography

Aiouache, F., 15/11/2017, Advances in Chemical Engineering. Academic Press Inc., p. 203-280 78 p. (Advances in Chemical Engineering; vol. 50).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Bio fuel: Environmentally benign biodiesel production from renewable sources

Abidin, SZ. & Saha, B., 11/09/2017, The Water-Food-Energy Nexus: Processes, Technologies, and Challenges. Mujtaba, I. M., Srinivasan, R. & Elbashir, N. O. (eds.). Boca Raton, Fla.: CRC Press, p. 333-364 32 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Fixed bed membrane reactors for ultrapure hydrogen production: Modeling approach

Alavi, M., Iulianelli, A., Rahimpour, M. R., Eslamloueyan, R., Falco, M. D., Bagnato, G. & Basile, A., 1/01/2017, Hydrogen Production, Separation and Purification for Energy.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Therapeutic applications of nanotechnology in dentistry: Nanostructures for Oral Medicine

Zafar, M. S., Khurshid, Z., Najeeb, S., Zohaib, S. & Rehman, I. U., 2017, Nanostructures for Oral Medicine: Micro and nano technologies. Elsevier Inc., p. 833-862 30 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Application of nanomaterials in dentistry: Micro and Nanomanufacturing

Qasim, S. B. & Rehman, I. U., 2017, Micro and Nanomanufacturing. Springer International Publishing, Vol. 2. p. 319-336 18 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Delivering a low-carbon electricity system in a liberalised market

Kemp, R. J., 07/2016, Delivering Energy Law and Policy in the EU and the US: a reader. Heffron, R. & Little, G. (eds.). Edinburgh: Edinburgh University Press, p. 163-171 9 p. 32

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Greener and sustainable approach for the synthesis of commercially important epoxide building blocks using polymer-supported Mo(VI) complexes as catalysts

Mohammed, ML. & Saha, B., 10/05/2016, Ion Exchange and Solvent Extraction: A Series of Advances. Sengupta, A. K. (ed.). Boca Raton: CRC Press, Vol. 22. p. 65-97 33 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Quantitative risk management and its limits: a UK engineering perspective

Kemp, R. J., 2016, Routeledge Handbook of Risk Studies. Burgess, A., Alemanno, A. & Zinn, J. O. (eds.). London: Routledge, p. 164-176 13 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Crab Cavity Development

Burt, G. C., 10/2015, The High Luminosity Large Hadron Collider: The New Machine for Illuminating the Mysteries of Universe. Brüning, O. & Rossi, L. (eds.). World Scientific, (Advanced Series on Directions in High Energy Physics; vol. 24).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Metamaterials with negative Poisson’s ratio: a review of mechanical propterties and deformation mechanisms

Hou, X. & Silberschmidt, V., 10/04/2015, Mechanics of Advanced Materials: Analysis of Properties and Performance. Silberschmidt, V. V. & Matveenko, V. P. (eds.). Springer International Publishing, p. 155-179 25 p. (Engineering Materials).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Harnessing the selective catalytic action of supported gold in hydrogenation applications

Wang, X., Li, M. & Keane, M. A., 2014, Heterogeneous Gold Catalysts and Catalysis. Ma, Z. & Dai, S. (eds.). Royal Society of Chemistry (Great Britain), p. 424-461 38 p. (RSC Catalysis Series).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Linear and nonlinear non-minimal state space control system design

Taylor, C. J., Chotai, A. & Tych, W., 1/10/2013, System Identification, Environmental Modelling, and Control System Design. Springer Verlag London Ltd, Vol. 9781430237051. p. 559-581 23 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Strength/elongation optimisation in alloys: A case for accelerated metallurgy research

Nava, E. I. G., Toda-Caraballo, I. & Rivera-Diaz, P. E. J. D. C., 1/01/2013, TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting. Wiley-Blackwell, p. 319-326 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Symmetry in material property relationships: A tool for the discovery of new alloys

Toda-Caraballo, I., Galindo, E. I. N. & Rivera-Díaz, P. E. J. D. C., 1/01/2013, TMS 2013 142nd Annual Meeting and Exhibition, Annual Meeting. Wiley-Blackwell, p. 311-318 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Flow visualization in gas-solid packed beds by spatially resolved near-infrared imaging

Aiouache, F., Nic An tSaoir, M. & Luis Abreu Fernandes, D., 1/01/2012, Single and Two-Phase Flows on Chemical and Biomedical Engineering. Dias, R., Lima, R., Martins, A. A. & Mata, T. M. (eds.). Bentham Science Publishers Ltd., p. 332-360 29 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Multi-state dependent parameter model identification and estimation

Tych, W., Sadeghi, J., Smith, P. J., Chotai, A. & Taylor, C. J., 2012, System Identification, Environmental Modelling, and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 191-210 20 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Nanoparticles, Properties, and Applications in Glass Ionomer Cements

Khan, A. S., Khan, M. & Rehman, I. U., 2012, Nanobiomaterials in Clinical Dentistry. Elsevier Inc., p. 93-108 16 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Rebound of a particle from a surface with a viscous and nonlinear viscoelastic liquid in the contact zone

Bowen, J., Cheneler, D., Andrews, J., Wu, C., Ward, M. & Adams, M., 2012, Discrete element modelling of particulate media. Wu, C. (ed.). Cambridge: RSC Publishing, p. 86-94 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Analysis of a coupled-mass microrheometer

Cheneler, D., 2012, Advances in microfluidics. Kelly, R. T. (ed.). Bejing, China: InTech, p. 50-70 21 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The influence of wetting on the buoyancy of particles

Bowen, J., Cheneler, D., Ward, M. & Adams, M., 2012, Particulate materials: synthesis, characterisation, processing and modelling. Wu, J. & Ge, W. (eds.). Cambridge: RSC Publishing, p. 213-218 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

SSpace: A flexible and general state space toolbox for MATLAB.

Taylor, C. J. & Pedregal, D. J., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 615-636 22 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Linear and nonlinear non-minimal state space control system design.

Taylor, C. J., Chotai, A. & Tych, W., 2012, System Identification, Environmental Modelling and Control System Design. Wang, L. & Garnier, H. (eds.). London: Springer, p. 559-582 24 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Thermomechanical Processing Design of Nanoprecipitate Strengthened Alloys Employing Genetic Algorithms

Rivera-Diaz-del-Castillo, P. E. J., de Jong, M. & Sluiter, M. H. F., 20/04/2011, Supplemental Proceedings: Materials Fabrication, Properties, Characterization, and Modeling. John Wiley and Sons Inc., Vol. 2. p. 477-484 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Determination of the Constants of Formation of Complexes of Iron(III) and acetohydroxamic acid

Andrieux, F., Boxall, C. & Taylor, R., 01/2011, Applications of Thermodynamics to Biological and Materials Science. Mizutani, T. (ed.). Rijeka, Croatia: InTech, p. 441-458 17 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Dental regeneration

Rehman, I. U. & Khan, A. S., 2011, Electrospinning for Tissue Regeneration. Elsevier Inc., p. 280-297 18 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Bolted joints in pultruded glass fibre reinforced polymer (GFRP) composites

Turvey, G., 2011, Composite joints and connections: principles, modelling and testing. Camanho, P. & Tong, L. (eds.). Cambridge: Woodhead Publishing Limited, p. 77-111 35 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An on-line monitoring technique for electrode degradation in bio-fluidic microsystems.

Al-Gayem, Q., Liu, H., Richardson, A. M. D., Burd, N. & Kumar, M., 10/2010, Proceedings of the 2010 IEEE International Test Conference (ITC). Austin, Texas: IEEE, p. 1-10 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Laser direct metal deposition: theory and applications in manufacturing and maintenance

Pinkerton, A. J., 2010, Advances in laser materials processing : technology, research and applications. Lawrence, J. (ed.). Oxford: Woodhead Publishing Limited

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Compact modelling of through-silicon vias (TSVs) in three-dimensional (3-D) integrated circuits.

Weerasekera, R., Grange, M., Pamunuwa, D. B., Tenhunen, H. & Zheng, L-R., 10/2009, Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. San Francisco: IEEE

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Scalability of Network-on-Chip communication architecture for 3-D meshes.

Weldezion, A. Y., Grange, M., Pamunuwa, D. B., Lu, Z., Jantsch, A., Weerasekera, R. & Tenhunen, H., 12/06/2009, Proc. ACM/IEEE International Symposium on Networks on Chip (NOCS). San Diego: IEEE, p. 114-123 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Conceptual design of a 1MW 175MHz CW magnetron.

Carter, R. G., 04/2009, 2009 IEEE International Vacuum Electronics Conference. Piscataway, NJ, USA: IEEE, 566 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Simple model of an inductive output tube.

Carter, R. G., 04/2009, 2009 IEEE International Vacuum Electronics Conference. Piscataway, NJ, USA: IEEE, p. 427-428 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The Radioactivity Depth Analysis Tool (RADPAT).

Shippen, B. A. & Joyce, M. J., 2009, ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management (ICEM2009). American Society of Mechanical Engineers, Vol. 2. p. 149-155 7 p. (American Society of Mechanical Engineers).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Physical Mapping and Performance Study of a Multi-Clock 3-Dimensional Network-on-Chip Mesh.

Grange, M., Weldezion, A. Y., Pamunuwa, D. B., Weerasekera, R., Zhonghai, L., Jantsch, A. & Shippen, D., 2009, Proceedings of the IEEE International Conference on 3D System Integration (3D IC), 2009. San Francisco: IEEE

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The effect of high-scatter shielding geometries in validating the dose inferred by N-Visage.

Adams, J. C., Joyce, M. J. & Mellor, M., 2009, ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management : ASME 2009 12th International Conference on Environmental Remediation and Radioactive Waste Management. ASME, Vol. 2. p. 497-506 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Closed-form equations for through-silicon via (TSV) parasitics in 3-D integrated circuits (ICs).

Weerasekera, R., Pamunuwa, D. B., Grange, M., Tenhunen, H. & Zheng, L-R., 2009, Workshop Notes, Design, Automation and Test in Europe (DATE). Nice

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Exploration of Through Silicon Via Interconnect Parasitics for 3-Dimensional Integrated Circuits

Grange, M., Weerasekera, R., Pamunuwa, D. & Tenhunen, H., 2009, Workshop Notes, Design, Automation and Test in Europe (DATE). Nice

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Bandwidth optimization for through silicon via (TSV) bundles in 3D integrated circuits.

Weldezion, A., Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 2009, Workshop Notes, Design, Automation and Test in Europe (DATE). Nice

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Three-dimensional Modeling of Stress Transfer, Stiffness Degradation, failure and Transverse Cracking in Composite Laminates.

Ye, J., 2009, Advances in Engineering Mechanics. Qin, Q. & Sun, B. (eds.). Nova Science Publishers, Vol. 1. p. 127-165 39 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Reducing the Computational Complexity of an RLS-Based Adaptive Controller in ANVC Applications

Montazeri, A. & Poshtan, J., 2009, Advances in Computer Science and Engineering: 13th International CSI Computer Conference, CSICC 2008 Kish Island, Iran, March 9-11, 2008 Revised Selected Papers. Sarbazi-Azad, H., Parhami, B., Miremadi, S-G. & Hessabi, S. (eds.). Berlin: SPRINGER-VERLAG BERLIN, p. 259-266 8 p. (COMMUNICATIONS IN COMPUTER AND INFORMATION SCIENCE; vol. 6).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Acoustic system for online wiring test on aircraft.

Xu, Z., Koltsov, D., Richardson, A. & Sutherland, A., 18/06/2008, IEEE 14th International Mixed-Signals, Sensors, and Systems Test Workshop, 2008. IMS3TW 2008.. IEEE, p. 1-4 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Memory technology for extended large-scale integration in future electronics applications.

Pamunuwa, D. B., 03/2008, Proc. Design, Automation and Test in Europe (DATE) Conference. Munich: IEEE, p. 1126-1127 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

RFID and NFC on Mobile Phones.

Coulton, P., Rashid, O. & Edwards, R., 03/2008, RFID Handbook: Applications, Technology, Security and Privacy. Ahson, S. & Ilyas, M. (eds.). CRC Press, p. 375-391 17 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Extending systems-on-chip to the third dimension : performance, cost and technological tradeoffs.

Weerasekera, R., Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 11/2007, Proc. IEEE/ACM International Conference on Computer-Aided Design (ICCAD). San Jose, California: IEEE, p. 212-219 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Early selection of system implementation choice among SoC, SoP and 3-D integration.

Weerasekera, R., Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 09/2007, Proc. International System-On-Chip Conference (SOCC). Hsin Chu, Taiwan: IEEE

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Molecular electronics device modeling for system design.

Lei, C., Pamunuwa, D. B., Bailey, S. & Lambert, C., 08/2007, Proc. IEEE International Conference on Nanotechnology. Hong Kong: IEEE, p. 1116-1119 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Mobile Games: Challenges and Opportunities.

Coulton, P., Bamford, W., Chehimi, F., Edwards, R., Gilbertson, P. & Rashid, O., 06/2007, Advances in Computers. Zelkowitz, M. (ed.). Academic Press, Vol. 69. p. 191-242 52 p. (Advances In Computers ).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An Investigation into Power from Pitch-Surge Point-Absorber Wave Energy Converters.

Chaplin, R. V. & Aggidis, G. A., 05/2007, International Conference on Clean Electrical Power, 2007. ICCEP '07.. IEEE, p. 520-525 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Renewable Energy Resources Impact on Clean Electrical Power by developing the North-West England Hydro Resource Model.

Leigh, P., Aggidis, G. A., Howard, D. & Rothschild, R., 05/2007, International Conference on Clean Electrical Power, 2007. ICCEP '07. IEEE, p. 315-322 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Imaging internal structure with electromagnetic induction tomography.

Ma, X., Peyton, A. J., Soleimani, M. & Lionheart, W. R. B., 12/03/2007, Instrumentation and Measurement Technology Conference, 2006. IMTC 2006. Proceedings of the IEEE. IEEE, p. 299 -303

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Delay-balanced smart repeaters for on-chip global signaling.

Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 12/02/2007, Proc. International Conference on VLSI Design. Bangalore: IEEE, p. 308-313 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Digital Pulse Pile-up Management in Organic Liquid Scintillators

Aspinall, M., D'Mellow, B., Mackin, R. O., Joyce, M. J. & Peyton, A. J., 2007, Proceedings of 5th World Congress on Industrial Process Tomography : Bergen, Norway, 3rd to 6th September, 2007.. Virtual Centre for Industrial Process Tomography

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Atomic composition tomography using pulsed fast neutron analysis

Peyton, A. J., Aspinall, M., D'Mellow, B., Mackin, R. O. & Joyce, M. J., 2007, Proceedings of 5th World Congress on Industrial Process Tomography : Bergen, Norway, 3rd to 6th September, 2007.. Virtual Centre for Industrial Process Tomography

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Nanodevices : from novelty toys to functional devices - an integration perspective.

Pamunuwa, D. & Weerasekera, R., 08/2006, Proceedings of the IEEE international conference on industrial and information systems.. p. 103 -108

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The UK'S Game Industry

Edwards, R. & Coulton, P., 05/2006, Embracing the Challenge,Exploiting the Opportunities: Building a World Class IT Profession in the Era of Global Sourcing. Swindon: British Computer Society, (Report by the British Computer Society).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Minimal-power, delay-balanced smart repeaters for interconnects in the nanometer regime.

Weerasekera, R., Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 03/2006, Proc. International Workshop on System-level Interconnect Prediction (SLIP). Munich: ACM, p. 113-120 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Dysarthic speech measures for use in evidence-based speech therapy.

Simm, W., Roberts, P. E. & Joyce, M. J., 2006, Proceedings of the 3rd Cambridge workshop on universal access and assistive technology.. Clarkson, J., Langdon, P. & Robinson, P. (eds.). London: Springer, p. 155-164 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Comparable performance characteristics from different test sites.

McCabe, A. P., Aggidis, G. A. & Stallard, T. J., 2006, Proceedings of the 4th EC co-ordination action on ocean energy workshop - performance monitoring of ocean energy systems (INETI)..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Absorption of energy from irregular waves by a buoyant, surging body.

Meadowcroft, J. A., Stallard, T. J., Baker, N. J. & Aggidis, G. A., 2006, Proceedings of the 16th international offshore and polar engineering conference (ISOPE)..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Failure of pultruded GRP WF-section webs in compression - an experimental investigation.

Turvey, G., 2006, Proceedings of the 12th European conference on composite materials (ECCM-12).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An FE analysis of the stresses in pultruded GRP single-bolt tension joints and their implications for joint design.

Turvey, G. & Wang, P., 2006, Proceedings of the 6th international conference on computational mechanics (ECCM 2006).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Single-bolt tension joints in pultruded GRP plate - effects of elevated temperature on failure loads, failure modes, load orientation and joint efficiency.

Turvey, G. & Wang, P., 2006, Proceedings of the 2nd international conference on joining plastics 2006..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Modelling the behaviour of soldier joints for wafer level SIP.

Liu, H., Strusevich, N., Stoyanov, S., Bailey, C., Richardson, A. M. D., Dumas, N., Yannou, J. M. & Georgel, V., 2006, Proceedings of the 8th IEEE electronics packaging technology conference..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Implementation issues for safe behaviour in robotic systems.

Seward, D. W., Pace, C. M. & Agate, R. Y., 2006, Proceeding of the European safety and reliability conference (ESREL 2006)..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Functional decomposition analysis of a WEC control system.

McCabe, A. P., Yavuz, H., Stallard, T. J., Bradshaw, A. & Aggidis, G., 2006, Proceedings of the SUPERGEN marine energy research consortium : work package 9 : wave power control..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Power optimisation for a heaving 1-DOF surging WEC in regular seas with dynamically changing wave frequency.

McCabe, A. P., Yavuz, H., Bradshaw, A., Stallard, T. J. & Aggidis, G., 2006, Proceedings of the SUPERGEN marine energy research consortium : work package 9 : wave power control..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Power optimisation study for a 2 DOF pitching and surging wave energy converter in regular seas.

McCabe, A. P., Yavuz, H., Stallard, T. J. & Aggidis, G., 2006, Proceedings of the SUPERGEN marine energy research consortium : work package 9 : wave power control..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Analysis of Wakefields in the ILC crab cavity.

Burt, G., Dexter, A., Bellantoni, C., Beard, P. & Goudket, P., 2006, Proceedings of the EPAC 2006 conference..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Progress towards crab cavity solutions for the ILC.

Burt, G., Dexter, A., Bellantoni, C., Beard, P. & Goudket, P., 2006, Proceedings of the EPAC 2006 conference..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A hydro power resource model for North West England.

Aggidis, G. A., Howard, D. C. & Wright, S. M., 2006, In water and the landscape : the landscape of ecology of freshwater ecosystems : Proceedings of the 14th annual IALE(UK) conference. Davies, B. & Thompson, S. (eds.). p. 41-46 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Energy source or sink? : The role of the Uplands in meeting our energy targets.

Aggidis, G. A., Howard, D. C., Wright, S. M. & Scott, R., 2006, Proceedings of the international Uplands centre conference on sustainable Uplands..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Bit-stream manipulation for SD modulator failure mode analysis.

Burbidge, M., Georgopoulos, K., Lechner, A. & Richardson, A., 2006, Proceedings of the 11th IEEE European test symposium..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Nanometer magnets

Koltsov, D., 2006, McGraw-Hill yearbook of science and technology.. McGraw-Hill, p. 205-208 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Is the environment-friendly aircraft an oxymoron?

Kemp, R., 2006, Proceedings of the Royal Aeronautical Society conference..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Regulating incalculable risks : the link between risk measurement and risk regulation.

Kemp, R., 2006, Proceedings of the EPSRC network conference on risk perception and assessment in design..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Status of 3.9 GHz defelecting mode (crab) cavity R&D.

Goudket, P., Bellantoni, L., Edwards, H., Foley, M., Khabiboulline, T., Mitchell, D., Rowe, N., Solyak, N., Burt, G., Dexter, A., Koeth, T. & Adolphsen, C., 2006, Proceedings of the LINAC 2006 conference..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Control architecture characteristics for intelligence in autonomous mobile construction robots.

Seward, D., Agate, R. Y., Bakari, M. & Pace, C. M., 2006, Proceedings of the 24th international symposium on automation and robotics in construction.. p. 846-851 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Emotions modelling for safe behaviour generation in robotic systems.

Seward, D., Agate, R. Y. & Pace, C. M., 2006, Proceeding of the European safety and reliability conference (ESREL 2006).. p. 93-99 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Counter terrorism using commercial hardware - the 55,000,000 km/hour speed trap.

Aspinall, M. & Joyce, M. J., 2006, Proceedings of the SET for Britain House of Commons science exhibition..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Human arm-like mechanical manipulator, the design and development of a multi-arm mobile robot for nuclear decommissioning.

Bakari, M. & Seward, D. W., 2006, Proceedings of the 3rd international conference on informatics in control, automation and robotics (ICINCO 2006)..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Multi-arm mobile robot for hazardous nuclear decommissioning tasks.

Bakari, M., Seward, D. W., Shaban, E. M. & Agate, R., 2006, Proceedings of the 23rd international symposium on automation and robotics in construction..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Investigation of width on the point absorber effect for a surging collector.

Baker, N. J., Stallard, T. J. & McCabe, A. P., 2006, Proceedings of the international conference on ocean energy..

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Signal processing for the use in the assessment of dysarthric speech.

Simm, W., Roberts, P. E. & Joyce, M. J., 5/12/2005, Proceedings of the 3rd IEE international seminar on medical applications of signal processing. p. 147-152 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Switching sensitive driver circuit to combat dynamic delay in on-chip buses

Weerasekera, R., Zheng, L-R., Pamunuwa, D. B., Tenhunen, H., Paliouras, V. (ed.), Vounckx, J. (ed.) & Verkest, D. (ed.), 09/2005, Integrated Circuit and System Design. Power and Timing Modeling, Optimization and Simulation: 15th International Workshop, PATMOS 2005, Leuven, Belgium, September 21-23, 2005. Proceedings. Paliouras, V., Vounckx, J. & Verkest, D. (eds.). Berlin: Springer, p. 277-285 9 p. (Lecture Notes in Computer Science; vol. 3728).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Economic low head hydro power by conversion to air pressure.

Widden, M. B., French, M. J. & Aggidis, G. A., 05/2005, Proceedings of the world renewable energy congress.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

PS frog MK5 WEC developments and design progress.

Aggidis, G. A., Bradshaw, A., French, M. J., McCabe, A. P., Meadowcroft, J. A. C. & Widden, M. B., 05/2005, Proceedings of the world renewable energy congress. University of Aberdeen, M. (ed.). p. 1199-1204 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A comparative study of wave energy technologies, public workshop: ‘making waves: the economic and social impacts of marine renewables.

Aggidis, G. A., Bradshaw, A., French, M. J., McCabe, A. P., Meadowcroft, J. A. C. & Widden, M. B., 2005, Proceedings of the EPSRC SuperGen marine energy research consortium.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Prototype development and testing of direct drive linear electrical machines for marine energy converters.

Baker, N. J., Mueller, M. A. & Taverner, P. J., 2005, Proceedings of the world renewable energy conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Crab cavity system for the ILC.

Burt, G., Dexter, A., Bellatoni, L., Goudket, P., Beard, C., Kalinin, A. & Ma, L., 2005, Proceedings of the ALCPG and ILC workshops.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Safety regulation of nuclear new-build – what can we learn from the rail industry?

Kemp, R. J., 2005, Proceedings of the Electricity Policy Research Group (Cambridge University) - Winter Research Seminar.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Will the lights go out?

Kemp, R. J., 2005, Summary of the proceedings of 1-day conference on UK energy policy.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Comparison of power capture in irregular waves and their regular wave components.

Meadowcroft, J. A. C., Stallard, T. J. & Baker, N. J., 2005, Proceedings of the 6th European wave and tidal energy conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Living up to the myth by enhancing the sustainability of rail.

Palacin, R. & Kemp, R. J., 2005, Proceedings of the rail research UK (EPSRC) conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The use of robotics and automation in nuclear decommissioning.

Seward, D. W. & Bakari, M. J., 2005, Proceedings of the 22nd international symposium on automation and robotics in construction.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The Quartz Crystal Microbalance as a Microviscometer for Improved Rehabilitation Therapy of Dysphagic Patients.

Dewar, R. J. & Joyce, M. J., 2005, 27th Annual International Conference of the Engineering in Medicine and Biology Society, 2005. IEEE-EMBS 2005.. p. 2511-2515 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The development of a multi-frequency electromagnetic instrument for monitoring the phase transformation of hot strip steel.

Dickinson, S. J., Binns, R., Yin, W., Davis, C. & Peyton, A. J., 2005, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2005. IMTC 2005. Vol. 2. p. 1091-1096 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The power capture of PS frog pitching and surging point absorber wave energy converter.

Widden, M. B., French, M. J. & Aggidis, G. A., 2005, Proceedings of the international symposium on fluid machinery for wave and tidal energy: state of the art and new developments.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Analysis of the lift-off effect of spectra for eddy current sensors.

Yin, W., Binns, R., Davis, C. & Peyton, A. J., 2005, Proceedings of the IMTC 2005 – instrumentation and measurement technology conference. p. 1779-1784 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Imaging the permeability distribution of a layered conductor using inductance spectroscopy.

Yin, W., Dickinson, S. J. & Peyton, A. J., 2005, Proceedings of the 4th world congress on industrial process tomography. p. 720-725 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A multi-frequency impedance analyser for electrical tomography systems.

Yin, W., Dickinson, S. J. & Peyton, A. J., 2005, Proceedings of the 4th world congress on industrial process tomography. p. 30-35 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The quantitative assessment of dysarthric speech for use in evidence-based therapy.

Simm, W., Roberts, P. E., Philpott, C. & Joyce, M. J., 2005, Proceedings of the 3rd conference on universal access in human-computer interaction.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Phase locking magnetrons by use of their pushing characteristic.

Tahir, I., Dexter, A. & Carter, R. G., 2005, Proceedings of the Sixth International Vacuum Electronics Conference (IVEC 2006).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The Design of a Portable Neutron Spectrometer.

D'Mellow, B., Jarrah, Z. & Joyce, M. J., 2005, Proceedings of the 9th European nuclear conference (ENC 2005).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Novel test solutions for dynamic performance parameter testing of high-resolution converters

Georgopoulos, K., 2005, Proceedings of the DATE workshop on Test of High-Resolution Mixed-Signal Interfaces.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Behavioural error injection, spectral analysis and error detection for a 4th order single-loop sigma-delta converter using Walsh transforms.

Georgopoulos, K., Burbidge, M., Lechner, A. & Richardson, A. M. D., 2005, Proceedings of the ETS workshop on Testing of High Resolution Mixed Signal Interfaces.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Investigation into the Use of Alternative Transformation Techniques for High-Resolution A/D Converter Testing.

Georgopoulos, K., Burbidge, M., Lechner, A. & Richardson, A. M. D., 2005, Proceedings of the IEEE Mixed Signal Test Workshop.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Development of a remote access facility for a PLL test course.

Grout, I., Murphy, J., Burbidge, M., Bell, G. & Manners, A., 2005, Proceedings of the remote experimentation and virtual instrumentation symposium.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Design Considerations for On-line Testing of a Capacitive Accelerometer.

Jeffery, C., Bunyan, R. J. T., Combes, D., King, D. O. & Richardson, A. M. D., 2005, Proceedings of the 11th IEEE International Mixed-Signals Testing Workshop. p. 220-223 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The integration of on-line monitoring and reconfiguration functions using IEEE1149.4 into a safety critical automotive electronic control unit.

Jeffery, C., Cutajar, R., Richardson, A. M. D., Prosser, S., Lickess, M. & Riches, S., 2005, Proceedings of Design, Automation and Test in Europe, 2005.. Vol. 3. p. 153-158 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Evolutionary ecology of insect host-parasite interactions : an ecological immunology perspective.

Wilson, K., 2005, Insect evolutionary ecology. Fellowes, M., Holloway, G. J. & Rolff, J. (eds.). Wallingford: CABI Publications, p. 289-341 53 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Eddy current measurement of the electrical conductivity and porosity of metal foams.

Ma, X. & Peyton, A. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 127-132 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Novel computer-based processing system for partial discharge detection and diagnosis.

Ma, X., Zhou, C. & Kemp, I. J., 8/11/2004, Proceedings of the IEEE Instrumentation and Measurement Technology Conference, 2004. IMTC 04.. IEEE, Vol. 1. p. 684-688 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Permanent magnet air-cored tubular linear generator for marine energy converters.

Baker, N. J., Mueller, M. A. & Spooner, E., 31/03/2004, Proceedings of the 2nd IEE international conference on power electronics, machines and drives. 31 ed. Vol. 2. p. 862-867 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Ethanol-Based Oxygenates from Biomass

Aiouache, F. & Goto, S., 31/03/2004, Handbook of MTBE and Other Gasoline Oxygenates. Ali, H. H. M. A. (ed.). New York: CRC Press, p. 121-151 31 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Development of reciprocating test-rig for wave and tidal power at new and renewable energy centre.

Baker, N. J., Mueller, M. A. & Taverner, P. J., 2004, Proceedings of the 3rd international conference on marine renewable energy (IMarEST). p. 223-239 17 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An experimental evaluation of the stiffening effect of CFRP flange reinforcement and practical end connections on the flexural response of pultruded GRP WF-beams.

Turvey, G. J., 2004, Proceedings of the IMTCR-04 conference on innovative materials and technologies for construction and restoration: volume 1: keynotes, materials, construction. p. 578-588 11 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Digital calibration of hydrogen-filled proton recoil spherical counters.

D'Mellow, B. & Joyce, M. J., 2004, Proceedings of the 9th international symposium on radiation physics. Elsevier

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Vibration frequencies and mode shapes of pultruded GRP circular plates with central circular cut-outs.

Turvey, G. J. & Mulcahy, N., 2004, Proceedings of the 4th international conference on thin-walled structures: thin-walled structures: advances in research, design and manufacturing technology. p. 927-934 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Recent research advances at Lancaster University on double-lap bolted tension joints in pultruded GRP plate material.

Turvey, G. J. & Wang, P., 2004, Proceedings of the 7th world pultrusion conference. 7 ed. p. 1-16 16 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Characterisation of the rotational stiffness and strength of web-flange junctions of pultruded GRP WF-sections via web bending tests.

Turvey, G. J. & Zhang, Y., 2004, Proceedings of the international conference on composites testing and model identification (CompTest 2004). p. 6-7 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Finite element analysis of buckling and initial failure loads of short pultruded GRP columns.

Turvey, G. J. & Zhang, Y., 2004, Proceedings of the 7th international conference on computational structures technology. p. 57-58 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Local buckling of axially compressed, pultruded GRP WF-section short columns – comparison of experimental response with FE analysis predictions.

Turvey, G. J. & Zhang, Y., 2004, Proceedings of the BSSM (British society for strain measurement) international conference on advances in experimental mechanics: advances in experimental mechanics. p. 87-92 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Shear failure strength of web-flange junctions in pultruded GRP profiles.

Turvey, G. J. & Zhang, Y., 2004, Proceedings of the ASIC 2004 conference: advanced polymer composites (ASIC 2004). p. 553-560 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Torsion of a pultruded GRP WF beam with practical end connections: experimental results and FE analysis.

Turvey, G. J. & Zhang, Y., 2004, Advanced composite Materials in bridges and structures. p. 99

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Web-flange junctions of pultruded GRP WF profiles: notched flange shear strengths.

Turvey, G. J. & Zhang, Y., 2004, Proceedings of a conference: FRP composites in civil engineering (CICE 2004). p. 859-864 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Crosstalk immune interconnect driver design.

Weerasekera, R., Pamunuwa, D. B., Zheng, L. R. & Tenhunen, H., 2004, Proceedings of the international symposium on system-on-chip conference. p. 139-142 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Formula student – the problem of learning and assessment.

Seward, D. W. & Quayle, S. D., 2004, Proceedings of the international conference on innovation, good practice and research in engineering education. Vol. 2. p. 99-104 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The development of a novel scanner to measure human composition.

Peyton, A. J., Tapp, H. S., Ktistis, C., Mackin, R. O., Wan-Daud, W. A., Goss, D. & Crescenzo, E., 2004, Proceedings of the XII international conference on electrical bio-impedance.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A 3D BEM modelling of body-scanning MIT system.

Pham, M. . H. & Peyton, A. J., 2004, Proceedings of the XII international conference on electrical bio-impedance.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An improved magnetic field simulator - MAGFLD.

Ghosh, T. K., Carter, R. G., Yadav, V., Joshi, Y., Guptra, R., Srivastava, A., Vishwanath, R. & Joshi, S. N., 2004, Proceedings of the 5th IEEE international vacuum electronics conference (IVEC 2004). p. 318-319 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A secondary electron emission model for multistage collectors.

Ghosh, T. K., Srivastava, A., Agarwal, P., Maurya, S., Srivastava, V. & Carter, R. G., 2004, Proceedings of the displays and vacuum electronics conference. p. 389-394 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Use of QCM in fluid applications: performance deterioration with cleaning and choice of surface roughness.

Dewar, R. & Joyce, M. J., 2004, Proceedings of Electrochem 2004.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The application of photocatalysis in transition metal and actinide redox chemistry

Boxall, C., Le Gurun, G. & Taylor, R. J., 2004, Recent Research Developments in Photochemistry and Photobiology. Trivandrum, India: Transworld Research Network, Vol. 7. p. 39-78 40 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Advanced materials for fluid machinery.

Aggidis, G. A., 2004, Proceedings of the international symposium on advanced materials for fluid machinery.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Centrifugal pumps – state of the art and new opportunities.

Aggidis, G. A., 2004, Proceedings of the international symposium on centrifugal pump developments.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The facts and fiction of renewable energy.

Aggidis, G. A., 2004, Proceedings of the UK energy policy conference: will the lights go out?.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Hydropower developments – new projects and rehabilitation.

Aggidis, G. A., 2004, Proceedings of the international symposium on hydro power developments.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

High and low force density electrical machines for marine renewable energy converters

Baker, N. J. & Mueller, M. A., 2004, Proceedings of the 3rd international conference on marine renewable energy (IMarEST). p. 123-32 92 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Simple frequency counting techniques for analysis of VCO/CP-PLL coupled noise sensitivity in fully embedded CP-PLLs.

Burbidge, M. J., 2004, Proceedings of the 2nd IEE integrated circuit test conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Motivations and techniques of built in self-test for embedded frequency synthesis systems incorporating charge pump phase-locked loops.

Burbidge, M., Lechner, A., Bell, G. & Richardson, A. M. D., 2004, IEE proceedings - circuits, devices and systems. 4 ed. Vol. 151. p. 337-348 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A structured approach to the simplification of optimization problems in a virtual prototyping environment.

Comerford, D. P. & Quayle, S. D., 2004, Proceedings of the 5th national conference on rapid design, prototyping and manufacture. p. 37-44 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Molten metal flow visualisation using mutual induction tomography (MIT).

Soleimani, M., Lionheart, W. R. B., Peyton, A. J. & Ma, X., 2004, 2004 Proceedings of the ASME 7th Biennial Conference on Engineering Systems Design & Analysis. Vol. 1. 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Techniques for automatic on chip closed loop transfer function monitoring for embedded charge pump phase locked loops.

Burbidge, M. J., Tijou, J. & Richardson, A. M. D., 19/12/2003, Design, Automation and Test in Europe Conference and Exhibition, 2003. p. 496-501 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Electroforming for Injection Moulding

Rennie, A. & Bocking, C., 20/06/2003, Rapid and Virtual Prototyping and Applications: Proc. Fourth National Conference on (Incorporating RAPTIA (Rapid Prototyping and Tooling - Industrial Applications) State-of-the-Art Reports). Bocking, C., Rennie, A. & Jacobson, D. (eds.). Professional Engineering Publishing, p. 239-248

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Construction of nonlinear dynamic MEMS component models using cosserat theory.

Wang, C., Richardson, A. M. D., Liu, D., Rosing, R., Tucker, R. & De Masi, B., 05/2003, Proceedings of the SPIE design, test, integration and packaging of MEMS symposium. France: Cannes Mandelieu

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Development of electromagnetic inductance tomography (EMT) hardware for determining human body composition.

Goss, D., Mackin, R. O., Crescenzo, E., Tapp, H. S. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 828-833 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Understanding the coupling mechanism in high frequency EMT.

Goss, D., Mackin, R. O., Crescenzo, E., Tapp, H. S. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 364-369 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Development of an eddy current system for monitoring taphole operations.

Coveney, J. A., Peyton, A. J., Kyllo, A. K., Pham, M. H. & Gray, N. B., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 377-383 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Investigations into testability improvements on a 16 bit audio sigma-delta ADC through the use of on-chip techniques.

De Venuto, D., Compagne, E. & Richardson, A. M. D., 2003, Proceedings of IMSTW 2003.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Unified aggregate component modelling of dynamic mechatronic systems using bond graphs.

Dickinson, S. J., 2003, Proceedings of the EEUG workshop. p. 6-12 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Depth profile scanning of cylindrical bar and wire using a spectroscopic direct current injection technique.

Dickinson, S. J., Binns, R., Peyton, A. J. & Yin, W., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 39-44 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Multi-frequency current injection model inversion for determining coating thickness and electromagnetic material properties of cylindrical metal bar or wire.

Dickinson, S. J. & Peyton, A. J., 2003, Proceedings of the IOP conference – sensors and their applications XII. p. 135-140 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

PS frog MK5: a self-contained offshore wave energy converter.

McCabe, A. P., Bradshaw, A., Chaplin, R. V. & Widden, M. B., 2003, Proceedings of the world energy conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Online monitoring for automotive sub-systems using 1149.4.

Jeffrey, C., Lechner, A. & Richardson, A. M. D., 2003, EPRINTS-BOOK-TITLE. 1.3 ed.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Re-using IEEE1149.4 as an infrastructure for online monitoring.

Jeffrey, C., Lechner, A. & Richardson, A. M. D., 2003, Proceedings of the 9th IEEE international mixed signal test workshop (IMSTW03). p. 247-249 3 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Annular sector plates: comparison of full-section and layer yield predictions.

Turvey, G. J. & Salehi, M., 2003, Proceedings of the 9th international conference on civil and structural engineering computing. p. 89-90 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Tearing failure of web-flange junctions in pultruded GRP profiles.

Turvey, G. J. & Zhang, Y., 2003, Proceedings of the DFC-7 conference on deformation and fracture of composites.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A 3D imaging system for measuring the shape and volume of the human body.

Wan-Daud, W. A., Tapp, H. S., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 358-363 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An intuitive visual aid to the design and analysis of controller transformations.

Winsby, A. J., Burge, S., Grout, I. & Widden, M. B., 2003, Proceedings of the educational ECAD user group.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Towards the realisation of a multi-perspective virtual design environment: the integration of design tools, methods and virtual reality.

Winsby, A. J., Quayle, S. D. & Seward, D. W., 2003, Proceedings of the 4th national conference on rapid and virtual prototyping and applications.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The use of inductance spectroscopy to image the conductivity distribution of a layered conductor.

Yin, W., Dickinson, S. J. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 472-478 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Simultaneous measurement of distance and thickness of a thin metal plate with an electromagnetic sensor using a simplified model.

Yin, W., Peyton, A. J. & Dickinson, S. J., 2003, Proceedings of the 20th IEEE instrumentation and measurement technology conference. IEEE, Vol. 1. p. 162-165 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Criteria for the selection of a software development environment for construction robotic systems.

Seward, D. W. & Zied, K., 2003, Proceedings of the 20th international symposium on automation and robotics in construction. p. 407-412 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Towards a comprehensive feasibility analysis for the use of robots in the construction industry.

Seward, D. W. & Zied, K., 2003, Proceedings of the 20th international symposium on automation and robotics in construction. p. 399-405 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A combined digital camera – EMT system to measure human body composition.

Tapp, H. S., Goss, D., Mackin, R. O., Crescenzo, E., Wan-Daud, W. A., Ktistis, C. & Peyton, A. J., 2003, Proceedings of the 3rd world congress on industrial process tomography. p. 384-390 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Addressing the difficulties in using inductive methods to evaluating human body composition.

Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2003, Proceedings of the international conference on robotics, vision, information and signal processing (ROVISP 2003).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Development of a linear array for intracavatary in vivo dosimetry during external beam radiotherapy and brachytherapy.

Price, R. A., Benson, C., Joyce, M. J. & Rogers, K., 2003, Proceedings of the nuclear science symposium, medical imaging conference: 13th international workshop on room temperature semiconductor X- and gamma-ray detectors.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Novel developments in the MOSFET for neutron radiation dosimetry applications

Price, R. A., Kestell, D. J., Stevens, D. L., Jaksic, A., Silvie, J. & Joyce, M. J., 2003, Proceedings of the 9th neutron dosimetry symposium.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Speech recognition software for dysarthric speakers.

Roberts, P. & Joyce, M. J., 2003, Proceedings of the 5th European CPLOL congress.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Modelling techniques for reliability prediction in MEMS technologies.

Rosing, R. & Richardson, A. M. D., 2003, Proceedings of the Nanotech 2003 conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Schemebuilder: from conceptual design to control of mechatronic systems.

Nagy, Z., Porter, I. & Bradshaw, A., 2003, Proceedings of the ICOM 2003 conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Electromagnetic imaging and tomography – a review of recent advances.

Peyton, A. J., Dickinson, S. J., Lionheart, W. R. B., Soleimani, M. & Pritchard, W. D. N., 2003, Proceedings of the institute of materials conference on on-line measurements for quality in the metals industry.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Towards Reactor Dosimetry with MOSFET devices.

Benson, C., Joyce, M. J., Kestell, D., Stevenson, D., Mathewson, A., Price, R. A. & Silvie, J., 2003, Reactor Dosimetry in the 21st Century: Proceedings of the 11th International Symposium on Reactor Dosimetry. Wagemans, J., Abderrahim, H. A., D'Hondt, P., D'hondt, P. J. & Raedt, C. D. (eds.). World Scientific Publishing Co. Pte Ltd, 756 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Analytic modeling of interconnects for deep submicron circuits.

Pamunuwa, D. B., Elassaad, S. & Tenhunen, H., 2003, 2003 International Conference on Computer-Aided Design (ICCAD'03). San Jose, California: IEEE Computer Society, p. 835-842 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Closed form metrics to accurately model the response in general arbitrarily-coupled RC trees.

Pamunuwa, D. B. & Elassaad, S., 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03.. IEEE, Vol. 4. p. IV-604

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Layout, performance and power trade-offs in mesh-based network-on chip architectures.

Pamunuwa, D. B., Öberg, J., Zheng, L-R., Millberg, M., Jantsch, A. & Tenhunen, H., 2003, Proc. IFIP International Conference on VLSI Systems-on-chip. Darmstadt, Germany: Technische Universität Darmstadt, Insitute of Microelectronic Systems, p. 362-366 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A global wire planning scheme for Network-on-Chip.

Liu, J., Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 2003, Proceedings of the 2003 International Symposium on Circuits and Systems, 2003. ISCAS '03.. Vol. 4. p. IV-892-IV-895

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Wavelets for the analysis and compression of partial discharge data.

Ma, X., Zhou, C. & Kemp, I. J., 7/08/2002, Conference on Electrical Insulation and Dielectric Phenomena, 2001 Annual Report.. IEEE, p. 329-334 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Investigation into the use of wavelet theory for partial discharge pulse extraction in electrically noisy environments.

Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Dielectric Materials, Measurements and Applications, 2000. Eighth International Conference on (IEE Conf. Publ. No. 473). IEE, p. 123-126 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

DSP based partial discharge characterisation by wavelet analysis.

Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Proceedings. ISDEIV. XIXth International Symposium on Discharges and Electrical Insulation in Vacuum, 2000.. IEEE, Vol. 2. p. 780 -783

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

PD pulse propagation studies using the wavelet transform.

Ma, X., Zhou, C. & Kemp, I. J., 6/08/2002, Electrical Insulation and Dielectric Phenomena, 2000 Annual Report Conference on. IEEE, Vol. 2. p. 626 -629

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Design optimisation of multistage depressed collectors for high efficiency travelling wave tubes using genetic algorithm.

Ghosh, T. K. & Carter, R. G., 04/2002, Proceedings of the 3rd IEEE international vacuum electronics conference, IVEC 2002. IEEE, p. 158-159 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Effect of beam parameters on the non-linear performance in broadband helix TWTs.

Jenkins, R. O. & Carter, R. G., 04/2002, Third IEEE International Vacuum Electronics Conference, 2002. IVEC 2002.. p. 286-287 2 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Just-in-time continuous flight auger piles using an instrumented auger.

Mure, N., Scott, J. N., Seward, D. W., Quayle, S. D., Clayton, C. R. I. & Rust, M., 2002, Proceedings of the 19th international symposium on automation and robotics in construction.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Electromagnetic sensors for monitoring phase transformations in steel – experimental results and modelling simulations.

Papaelias, M. P. H., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2002, Proceedings of the TMS conference: modelling the performance of engineering structural materials III.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

On-line detection of phase transformation and effects of microstructural variability in steel using electromagnetic sensors.

Papaelias, M. P. H., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2002, Proceedings of the metallurgy and materials conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The development of high frequency electromagnetic inductance tomography for low conductivity materials.

Peyton, A. J., Mackin, R. O., Goss, D., Crescenzo, E. & Tapp, H. S., 2002, Proceedings of the 2nd international symposium on process tomography.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Addressing the difficulties in using inductive methods to evaluating human body composition.

Peyton, A. J., Mackin, R. O., Goss, D., Wan-Daud, W. A., Crescenzo, E., Saunders, N. H. & Tapp, H. S., 2002, Proceedings of the 9th symposium of the société de biométrie humaine.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Integration of modelling and conceptual design applied to mechatronics.

Porter, I., Bradshaw, A., Counsell, J. M. & Nagy, Z., 2002, Proceedings of the mechatronics forum international conference (Mechatronics 2002).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Recent improvements to a transportable neutron spectrometer (TNS).

Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 2002, Proceedings of a conference on nuclear instruments and methods in physics research.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Investigations for minimum invasion digital only built in ‘ramp’ based test techniques for charge pump PLLs.

Burbidge, M. J., Tijou, J., Poullet, F. & Richardson, A. M. D., 2002, Proceedings of the Seventh IEEE European Test Workshop, 2002.. IEEE, p. 95-102 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Investigations of automatic built in transient step response monitoring for embedded second order charge pump phase locked loop frequency synthesisers.

Burbidge, M. J. & Tijou, J. R., 2002, Proceedings of the 8th IEEE mixed signal test workshop.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Experimental studies of electron multipacting in CESR type rectangular waveguide couplers.

Geng, R. L., Belomestnykh, S., Padamsee, H., Reilly, J., Goudket, P., Dykes, D. M. & Carter, R. G., 2002, Proceedings of the 8th European particle accelerator conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Multipacting induced breakdown in rectangular waveguide couplers.

Geng, R. L., Belomestnykh, S., Padamsee, H., Reilly, J., Goudket, P., Dykes, D. M. & Carter, R. G., 2002, Proceedings of the workshop on superconducting RF.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Development of a sensor for visualisation of steel flow in the continuous casting nozzle

Higson, S. R., Drake, P., Stamp, D. W., Peyton, A. J., Binns, R., Lyons, A. & Lionheart, W. R. B., 2002, Proceedings of the 21st international ATS steelmaking conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Multi-frequency electromagnetic impedance spectroscopy for the detection of phase transformation during strip steel cooling.

Binns, R., Crudgington, K., Davis, C. L., Dickinson, S. J., Morris, P. F. & Peyton, A. J., 2002, Proceedings of the metallurgy and materials conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Developments in the use of electromagnetic methods to monitor cooling transformations in steel samples.

Binns, R., Davis, C., Dickinson, S. J., Morris, P. F., Peyton, A. J., Papaelias, M. P. H., Pritchard, W. D. N. & Strangwood, M., 2002, Proceedings of the IOM conference: instrumentation to innovation - applications and developments in metal production and use.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A forward model for planar array EMT imaging of cylindrical conductors embedded in a non-conducting medium.

Bissessur, Y. & Peyton, A. J., 2002, Proceedings of the 2nd international symposium on process tomography.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Data interpretation from Leuze RotoScan sensor for robot localisation and environment mapping.

Seward, D. W., Quayle, S. D., Kied, K. & Pace, C., 2002, Proceedings of the 19th international symposium on automation and robotics in construction.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Optimising bandwidth over deep sub-micron interconnect.

Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 2002, 2002 IEEE International Symposium on Circuits and Systems. IEEE, Vol. 4. p. IV-193

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

On dynamic delay and repeater insertion in distributed capacitively coupled interconnects.

Pamunuwa, D. B. & Tenhunen, H., 2002, International Symposium on Quality Electronic Design, 2002. Proceedings.. IEEE, p. 240-245 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

On dynamic delay and repeater insertion.

Tenhunen, H. & Pamunuwa, D. B., 2002, IEEE International Symposium on Circuits and Systems, 2002. IEEE, p. 97-100 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Repeater insertion to minimise delay in coupled interconnects.

Pamunuwa, D. B. & Tenhunen, H., 2001, Fourteenth International Conference on VLSI Design, 2001.. Bangalore, India: IEEE, p. 513-517 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Optimisation of C=C double bond reductions using Clostridium sporogenes.

Li, H., Noble, L., Mather, P., Hatziantonious, D., Law, Z., Vasiliki, K., Gardiner, J. M. & Stephens, G., 2001, Proceedings of the international conference on Biotransformation, Darmstadt (Germany), September 2nd-7th, 2001. Darmstadt, p. 312

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Biotransformation of alkenes by the obligate anaerobic M. thermoactica.

Tan, A. W., Li, H., Williams, P., Noble, L. M., Mather, P., Gardiner, J. M. & Stephens, G. M., 2001, Proceedings of the international conference on Biotransformation, Darmstadt (Germany), September 2nd-7th, 2001. Darmstadt

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Single bolt tension joints in pultruded GRP material – effect of elevated temperature on failure loads and strengths and joint efficiency.

Turvey, G. J. & Wang, P., 2001, Proceedings of the BSSM conference on strain measurement in the 21st century. p. 20-23 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Improved 3-D simulation of multistage depressed collectors for high efficiency travelling wave tubes.

Ghosh, T. K. & Carter, R. G., 2001, Proceedings of IVEC ’2001.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Test techniques for embedded charge pump phase-locked loops: problems, current BIST techniques and alternative suggestions.

Burbidge, M., Richardson, A. M. D. & Lechner, A., 2001, Proceedings of the 7th IEEE international test workshop. p. 97-102 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Computer modelling of microwave tubes - a review.

Carter, R. G., 2001, Proceedings of IVEC ’2001.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An improved equivalent circuit model of folded-waveguide slow-wave structures.

Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Effects of imperfections on periodic permanent magnet focussing of electron beams.

Carter, R. G. & MacGregor, A., 2001, Proceedings of IVEC ’2001.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A high speed, multi-frequency impedance analysing node.

Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 2nd world congress on industrial process tomography. p. 502-510 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Innovative electronic analysis device for nuclear fuel reprocessing.

Ash, D. C., Joyce, M. J., Garnham, G. W., Barnes, C. & Port, S. N., 2001, Proceedings of the 9th international conference on nuclear engineering (ICONE9).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Monte Carlo simulation of a spherical spectroscopy instrument for fission reactor environments.

Benson, C., Winsby, A., Joyce, M. J. & Silvie, J., 2001, Proceedings of the MCNEGS meeting.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Detection of phase transformation in hot strip steel samples using a multi-frequency electromagnetic impedance measuring node.

Binns, R., Dickinson, S. J. & Peyton, A. J., 2001, Proceedings of the 11th conference on sensors and their applications. p. 45-50 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Imaging steel profiles within a pouring nozzle.

Binns, R., Lyons, A. R. A. & Peyton, A. J., 2001, Proceedings of the 2nd world congress on industrial process tomography. p. 138-147 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

"Pultruded GRP frames: simple (conservative) approach to design, a rational alternative and research needs for improved design".

Turvey, G. J., 2001, Proceedings of the ASCE sponsored workshop on composites in construction: a reality.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Elasto-plastic large deflection of uniformly loaded sector plates.

Turvey, G. J. & Salehi, M., 2001, Proceedings of the 3rd international conference on thin-walled structures. p. 631-640 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Detection of phase transformation during steel processing using EM sensors.

Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of the 1st international seminar in progress in innovative manufacturing engineering (PRIME).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Effects of microstructural variability on the measurement of ferrite transformation using EM sensors.

Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of a materials research conference.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Measurement of the ferrite-austenite phase balance during transformation in steel using electromagnetic sensors.

Papaelias, M. P., Davis, C. L., Strangwood, M., Binns, R. & Peyton, A. J., 2001, Proceedings of the XVIIth national panhellenic conference in solid state physics.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Finite element analysis to support component level fault modelling for MEMS.

Reichenbach, R., Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of SPIE design, test, integration and packaging of MEMS symposium. Vol. 4408. p. 147-158 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Generation of component level fault models for MEMS.

Rosing, R., Reichenbach, R., Richardson, A. M. D. & Dorey, A. P., 2001, Proceedings of the 7th international mixed-signal testing workshop (IMSTW ’01). p. 40-45 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Teaching safety – issues of course design and delivery.

Seward, D. W. & Joyce, M. J., 2001, Proceedings of a safety critical systems symposia.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The use of simulation in the economic analysis of robotised construction tasks.

Seward, D. W., Zied, K. & Riehl, J., 2001, Proceedings of the 18th international symposium on robotics in construction. p. 265-270 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

3-D simulation of asymmetric multi-stage depressed collectors with secondary electron emission effects for high efficiency space TWTs.

Ghosh, T. K. & Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Design of the pitch profile for high linearity helix TWT amplifiers.

Jenkins, R. O. & Carter, R. G., 2001, Proceedings of a conference on displays and vacuum electronics.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Use of electron bunching diagrams for the design of pitch profiles in helix TWTs.

Jenkins, R. O. & Carter, R. G., 2001, Proceedings of IVEC ’2001.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Nuclear technology – the engineering perspective.

Joyce, M. J. & Seward, D. W., 2001, Proceedings of the nuclear education and training forum.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

3DB challenge for DfT, DfM, DOT and BIST integration into analogue and mixed signal ICs.

Lechner, A., Burbidge, M. J., Richardson, A. M. D. & Hermes, B., 2001, Proceedings of the 2nd Latin-American test workshop (LATW ’01). p. 194-199 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A failure mode analysis of a 6-bit folding ADCs.

Lechner, A., Richardson, A. M. D., Burbidge, M. & Hermes, B., 2001, Proceedings of the 7th IEEE international mixed-signal testing workshop (IMSTW ’01). p. 19-23 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Short circuit faults in state-of-the-art ADCs – are they hard or soft?

Lechner, A., Richardson, A. M. D. & Hermes, B., 2001, 10th Asian Test Symposium : proceedings : 19-21 November, 2001, Kyoto, Japan. IEEE Computer Society, p. 417-422 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Towards a better understanding of failure modes and test requirements of ADCs.

Lechner, A., Richardson, A. M. D. & Hermes, B., 2001, Proceedings of a conference: automation and test in Europe (DATE ’01). p. 803

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Determination of the interaction impedance of helix slow-wave structures.

Carter, R. G., 05/2000, International Vacuum Electronics Conference. California: IEEE, p. 2-2 1 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Developments in the use of electromagnetic methods to monitor the transformation of steel samples.

Binns, R. & Peyton, A. J., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000). Penang, Malaysia, p. 155-162 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Developments in the use of electromagnetic methods to monitor the transformation of steel samples.

Binns, R., Johnstone, S., Morris, P. F., Peyton, A. J. & Pritchard, W. D. N., 2000, Proceedings of the institute of material conference: measurement technology and information management through the process route.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The quartz crystal microbalance: an electronic sensor for dynamic fluid mechanics.

Ash, D., Joyce, M. J. & Port, S. N., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Nuclear reprocessing stream analysis using the quartz crystal microbalance.

Ash, D., Joyce, M. J., Port, S. N. & Barnes, C., 2000, Proceedings of the universities nuclear technology forum.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The quartz crystal microbalance: an electronic sensor for dynamic fluid mechanics.

Ash, D., Joyce, M. J., Port, S. N. & Barnes, C., 2000, Proceedings of 2nd conference on postgraduate research in electronics and photonics.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Uniform and patch loaded steel plates: comparisons between analysis and experiment.

Turvey, G. J. & Osman, M. Y., 2000, Computational steel structures technology. Ivanyi, M., Muzeau, J. P. & Topping, B. H. V. (eds.). Edinburgh: Civil-Comp press, p. 49-59 11 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Uniform and patch loaded steel plates – comparisons between analysis and experiment.

Turvey, G. J. & Osman, M. Y., 2000, Proceedings of the 5th international conference on computational structures technology. Leuven

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Reliability and usability improvements to a transportable neutron spectrometer (TNS).

Weaver, J. A., Joyce, M. J., Peyton, A. J. & Roskell, J., 2000, Proceedings of the regional symposium on quality and automation (RESQUA 2000). p. 292-301 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Recent improvements to a transportable neutron spectrometer (TNS).

Weaver, J. A., Joyce, M. J., Peyton, A. J. & Silvie, J., 2000, Proceedings of the international workshop on neutron field spectrometry in science, technology and radiation protection. Pisa

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The introduction of digital processing techniques to a neutron sensing system.

Weaver, J. A., Peyton, A. J., Joyce, M. J. & Silvie, J., 2000, Proceedings of the 2nd conference on postgraduate research in electronics and photonics. p. 30-35 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Using digital signal processing techniques for neutron spectroscopy.

Weaver, J. A., Peyton, A. J., Joyce, M. J. & Silvie, J., 2000, Proceedings of the universities nuclear technology forum. University of Bath

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Economical conversion of low-head hydropower

Widden, M. B. & French, M. J., 2000, Proceedings of the world renewable energy congress VI. Brighton, p. 1611-1614 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Can 'spirit of place' be a guide to ethical building.

Brook, I., 2000, Ethics and the built environment. Fox, W. (ed.). London; New York: Routledge, 240 p. (Professional ethics).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Moment – rotation tests on bolted end connections in pultruded GRP beams – tests with stainless steel cleata and an assessment of their performance relative to GRP cleats.

Turvey, G. J., 2000, Proceedings in the ECCM9 (composites – from fundamentals to exploitation). Brighton

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A fault simulation methodology for MEMS.

Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the design automation and test in Europe conference. Paris: IEEE, p. 476-483 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A fault simulation methodology for MEMS.

Rosing, R., Richardson, A. M. D. & Dorey, A. P., 2000, Proceedings of the IEE symposium on quality and automation (RESQUA 2000). Penang, Malaysia

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

The use of electromagnetic sensors to monitor temperature during strip steel processing.

Papaelias, M. P., Davis, C. L., Peyton, A. J., Strangwood, M. & Binns, R., 2000, Proceedings of the XVI panhellenic national conference in solid state physics. Greece

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Design-for-testability for mixed signal and analogue design.

Richardson, A. M. D. & Lechner, A., 2000, Proceedings of 7th international conference on mixed design of integrated circuits and systems. Poland

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Foam formation in low expansion fire fighting equipment.

Roger, L. E., Widden, M. B. & Osborne, M. J., 2000, Proceedings of the Eurofoam 2000 conference. The Netherlands

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Applications of mixed signal test strategies to next generation microsystems.

Jeffery, C., Rosing, R. & Richardson, A. M. D., 2000, Design, modeling, and simulation in microelectronics. 4228 ed. SPIE (Society of Photo-Optical Instrumentation Engineers), p. 21-32 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A built-in test solution for a SMART silicon micromachined resonant pressure sensor.

Jeffery, C., Rosing, R. & Richardson, A. M. D., 2000, IEEE European Test Workshop. IEEE

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Stability analysis of a TWT against the reflected signals using alarge-signal model.

Srivastava, V., Joshi, S. N. & Carter, R. G., 2000, 2nd International ICMMT 2000 Conference on Microwave and Millimeter Wave Technology. Beijing: IEEE, p. 80-83 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Dead time (a ghost story).

Wilson, S. T. & Botting, F., 2000, The limits of death : between philosophy and psychoanalysis. Morra, J., Robson, M. & Smith, M. (eds.). Manchester: Manchester University Press, p. 57-78 22 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Combating digital noise in high speed ULSI circuits using binary BCH encoding.

Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 2000, The 2000 IEEE International Symposium on Circuits and Systems, 2000. Proceedings. ISCAS 2000 Geneva.. Geneva: IEEE, Vol. 4. p. 13-16 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Accurate a priori signal integrity estimation using a multilevel dynamic interconnect model for deep submicron VLSI design.

Zheng, L-R., Pamunuwa, D. B. & Tenhunen, H., 2000, Proceedings of the 26th European Solid-State Circuits Conference, 2000. ESSCIRC '00.. IEEE, p. 352-355 4 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Error-control coding to combat digital noise in interconnects for ULSI circuits.

Pamunuwa, D. B., Zheng, L-R. & Tenhunen, H., 1999, Proc. IEEE Norchip Conference Oslo 1999. Norway: IEEE, p. 275-282 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Kinetic modeling of electron transfer processes in colloidal semiconductor photocatalysis

Boxall, C., 1999, Applications of Kinetic Modelling. Compton, R. G. & Hancock, G. (eds.). Elsevier, Vol. 37. p. 281-368 88 p. (Comprehensive Chemical Kinetics).

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Environmental impact of the nuclear fuel cycle

Hester, R. E., Harrison, R. M., Joyce, M. J. & Port, S. N., 1999, Environmental impact of power generation. Hester, R. E. & Harrison, R. M. (eds.). Vol. 11. p. 73-96 24 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Conceptual design and modelling of a domestic mobile robot.

Yavuz, H. & Bradshaw, A., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 15-35 21 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Conceptual design and development of a navigation system for a mobile robot.

Yavuz, H., Chandler, A., Bradshaw, A. & Seward, D. W., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 65-85 21 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Using electromagnetic methods to monitor phase transformation in steel samples.

Binns, R., Johnstone, S., Mallinson, S., Meydan, T. & Peyton, A. J., 1999, Proceedings of the institute of material conference: advances in on-line instrumentation for finishing processes in strip production. London

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Mechatronics knowledge management

Bradshaw, A., 1999, Proceedings of the second world manufacturing conference: keynote speech. Durham

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

CACD and further developments.

Counsell, J. M. & Dawson, D., 1999, Proceedings of the 1999 Lancaster international workshop on engineering design: Computer-aided conceptual design ’99 (CACD ’99). Bradshaw, A. & Counsell, J. M. (eds.). Windermere, p. 165-170 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Some experimental force analysis for automation of excavation by a backhoe excavator.

Hemami, A., Seward, D. W. & Quayle, S., 1999, Proceedings of the 16th IAARC/IFAC/IEEE international symposium on automation and robotics in construction. Madrid, p. 503-508 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Development of electromagnetic tomography (EMT) for industrial applications: part 1: sensor design and instrumentation

Peyton, A. J., Borges, A. R., Oliveira, E., Lyon, G. M. & Yu, Z. Z., 1999, Proceedings of the world congress on industrial process tomography. Buxton

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Global integration of construction automation and robotics.

Seward, D. W., Quayle, S., Mure, N. & Scott, J., 1999, Proceedings of the 16th IAARC/IFAC/IEEE international symposium on automation and robotics in construction. Madrid, p. 11-16 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Fibre Reinforced Polymer Composite Structural Pultrusions and Their End Connections.

Turvey, G. J., 1999, Composites and Plastics in Construction: BRE, Watford, UK, 16th-18th November 1999. RAPRA, p. 1-8 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Semi-rigid bolted connections in pultruded GRP beams and simple frames: part 1

Turvey, G. J., 1999, Proceedings of the COST C1 conference: COST C1: control of the semi-rigid behaviour of civil engineering structural connections. Liege, p. 547-556 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Mixed-signal custom IC control processors incorporating design for test/self-test.

Grout, I., Burge, S. E. & Winsby, A. J., 09/1998, IEE Colloquium on DSP Chips in Real Time Measurement and Control (Digest No: 1997/301). Leicester: IEEE, p. 1/1-1/4

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Semi-rigid connection in pultruded GRP frame structures.

Turvey, G. J. & Cooper, C., 1998, Mechanics of composite materials and structures. Mota Soares, C. A. ., Mota Soares, A. M. & Freitas, M. J. M. (eds.). p. 151-166 16 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Semi-rigid connections and their effects on the sway response of pultruded GRP columns in low-rise construction.

Turvey, G. J. & Cooper, C., 1998, Proceedings of the 2nd international conference on composites in infrastructure (ICCI ’98). University of Arizona, p. 221-235 15 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A design for testability study on a high performance automatic gain control circuit.

Lechner, A., Richardson, A. M. D., Hermes, B. & Ohletz, M., 1998, Proceedings of the 16th IEEE VLSI test symposium. IEEE, p. 376-385 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Design for testability strategies for a high performance gain control circuit.

Lechner, A., Richardson, A. M. D., Hermes, B. & Perkins, A., 1998, Proceedings of the international IEEE mixed signal test workshop. The Hague

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Semi-rigid behaviour of civil engineering structural connection.

Mottram, J. T. & Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and application of polymeric composite connections. Brussels/Luxembourg: European Commission, p. 99-99 1 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Integrating the business process with automation through object technology in a foundation company.

Mure, N., Scott, J. N., Seward, D. W. & Quayle, S. D., 1998, Proceedings of ECPPM'98 - the Second European Conference on Product and Process Modelling in the Building Industry. BRE, 581 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Comparison of PI and PDF controls of a manipulator arm.

Nagy, Z. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 739-744 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Development of a safety manager for an autonomous mobile robot.

Pace, C. & Seward, D., 1998, Proceedings of the 29th international symposium on robotics 1998: advanced robotics beyond 2000. Birmingham, p. 277-282 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An approach to realistic fault prediction and layout design for testability in analogue circuits.

Prieto, J., Richardson, A. M. D., Rueda, A. & Grout, I., 1998, Proceedings of the conference on design, automation and test in Europe. Paris, p. 906-912 7 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Schemebuilder mechatronics.

Porter, I., 1998, Proceedings of the engineering design conference ’98: design reuse. Brunel University, p. 561-568 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Knowledge representation for mechatronic systems.

Porter, I., Counsell, J. M. & Shao, J., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 181-196 16 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Design for testability strategies for mixed signal and analogue designs: from layout to system.

Richardson, A. M. D., Lechner, A. & Olbrich, T., 1998, Proceedings of the 5th IEEE international conference on electronics, circuits and systems. Lisbon, p. 425-433 9 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

An integrated diagnostic reconfiguration (IDR) technique for fault tolerant mixed signal microsystems.

Sharif, E., Dorey, A. P. & Richardson, A. M. D., 1998, Proceedings of the IEEE international circuits and systems symposium. IEEE

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Frame connections.

Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 27-49 23 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Plate-to-plate mechanical: part II: testing and applications.

Turvey, G. J., 1998, COST C1: state-of-the-art review on design, testing, analysis and applications of polymeric composite connections - Semi-rigid behaviour of civil engineering structural connections. Mottram, J. T. & Turvey, G. J. (eds.). Brussels/Luxembourg: European Commission, p. 15-26 12 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Recent developments in testing, design analysis and modelling of bolted connections in pultruded GRP frames made of open-section profiles.

Turvey, G. J., 1998, Proceedings of the 4th EPTA world pultrusion conference. European Pultrusion Technology Association, p. 14

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

A knowledge based mechatronics approach to controller design.

Bradshaw, A. & Counsell, J. M., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1723-1727 5 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Schemebuilder mechatronics: design principles for controller design

Counsell, J. M. & Porter, I., 1998, Proceedings of ICAM ’98. Okayama, Japan

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Schemebuilder mechatronics for flight control systems

Counsell, J. M. & Porter, I., 1998, Computer Aided Conceptual Design ’98: proceedings of the 1998 Lancaster international workshop on engineering design. Bradshaw, A. & Counsell, J. M. (eds.). p. 197-206 10 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Schemebuilder: CACD for mechanism motion control.

Counsell, J. M., Porter, I. & Duffy, M., 1998, Proceedings of a workshop on power transmission and motion control. University of Bath

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Developments in the piling process through advances in technology

Findlay, J. D., Seward, D. W., Mure, J. N. & Scott, J., 1998, The value of geotechnics in construction. London: Institution of Civil Engineers, 359 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Non-linear controller design for a highly coupled VSTOL aircraft.

Bennett, D., Burge, S. E. & Bradshaw, A., 1998, Proceedings of the UKACC international conference on control ’98. Swansea, p. 1510-1515 6 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Multi-diagnostic observations of heater-induced effects at pump frequencies close to the electron gyroharmonics.

Honary, F., Stocker, A. J., Robinson, T. R., Rietveld, M. T. & McCrea, I. W., 1997, Proceedings of the 8th EISCAT international workshop. Leicester

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Developing the safety case for large mobile robots.

Seward, D. W., Quayle, S., Sommerville, I. & Morey, R., 1997, Advances in safety and reliability : proceedings of the ESREL '97 International Conference on Safety and Reliability, 17 - 20 June 1997, Lisbon, Portugal. Soares, C. G. (ed.). Oxford: Pergamon, p. 2293-2300 8 p.

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter

Safe systems architectures for autonomous robots.

Sommerville, I., Seward, D. W., Morey, R. & Quayle, S., 1997, Proceedings of the safety critical systems conference. Brighton

Research output: Contribution in Book/Report/Proceedings - With ISBN/ISSN › Chapter